OpenSUSE Install :: Unable To Install Speedtouch Usb ADSL Modem
Jan 23, 2010
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies
ADVERTISEMENT
May 25, 2010
I installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
View 5 Replies
View Related
Jun 11, 2010
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies
View Related
Jul 4, 2010
I have been successfully using my speedtouch usb 330 for years.
Now suddenly something weird occurs.I manage to stay connected a few minutes, afterwards the line drops down and I can't reconnect.
I switched the connection script to "verbose mode" and what I get is:
It seems that I can't get an answer from the provider, but if I reboot it connects at first attempts, but the connection falls down again after a few minutes.
I have dual boot. No similar problems is affecting the connection under Windows, so some hardware fault is ruled out as a possibility.
View 5 Replies
View Related
Aug 6, 2009
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies
View Related
Nov 30, 2009
Due to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies
View Related
Jan 13, 2011
My girlfriend's xp machine has decided to refuse to boot and as a consequence have told her I can install fedora for all her computing needs (facebook and errrrrrrm facebook)
Problem, she's got this strange usb modem, a thomson speedtouch 330 which when plugged into my laptop is listed in lsusb and lsmod which suggest to me the module/driver is built into the kernel, but does not at present work, I'd hate to admit defeat and reinstall xp.
View 10 Replies
View Related
Feb 5, 2011
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies
View Related
Apr 28, 2009
I'm trying to use Speedtouch USB modem.
According to [url].
After a bit of fighting interface works I can ping any domain name or ip address. I can even connect to web server via telnet, for example telnet www.org 80. I can see the response from Web server, but Mozilla says that it is offline, System Update says that no connection.
What can be the problem if manually I can connect but any Gnome GUI program says you are offline?
View 1 Replies
View Related
Jun 19, 2011
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
Dec 27, 2010
I downloaded the usb-modeswitch and usb-modeswitch-data as suggested by one of the users from [URL] but whenever I try to install after going to the folder using sudo make install, none of the packages get inatalled. I am a new user and I am using ubuntu 9.10. I want to use my MICROMAX 300G USB modem to surf internet but can not do.
View 2 Replies
View Related
Mar 22, 2009
I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies
View Related
Jul 25, 2010
I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies
View Related
Nov 17, 2010
I did a port scan on my server from outside my network and saw that port 10080 AMANDA is open.Amanda isn't installed on any of my computers or my server and the port is not forwarded by my modem or router. So why is this port open and how can I close it?
View 6 Replies
View Related
May 26, 2009
While communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies
View Related
Oct 10, 2010
I want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?
View 2 Replies
View Related
Dec 20, 2010
not *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies
View Related
Jun 22, 2010
Well I got the Persistent openSUSE11.2 working. However I cannot find a way to obtain kinternet. for some reason it is NOT on the liveCD! Is there another program that I can use to connect to the repos so that I can get kinternet? I have a liveDC and an install DVD. can I install from the DVD onto the USB so that when I boot with the USB, Kinternet is available for further downloads?
View 1 Replies
View Related
Mar 25, 2010
What are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?
View 4 Replies
View Related
Jun 19, 2011
I am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
View 1 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Dec 16, 2010
Im not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
May 14, 2010
I am currently running a network with a file server that runs Ubuntu 10.04 Desktop at the moment. DHCP and samba are setup on it for now. Has multiple network cards but we only use the gigabit interface. Here's what I want to do in the near future. I want to provide internet access to the network via ADSL (no better option currently) So what i'll have is one or more ADSL lines and their corresponding modems (most likely D-link ones as they are cheap). As i understand it the server will be doing the job of a router. anyway, point wise here's what i want to be able to do:
1. Have ability to increase capacity/bandwidth with more ADSL line & modem combinations
2. Have user accounts (probably web based setup or any other option) for internet access so that they can be billed per GB.
3. Still be able to share files that are on the local network using local DHCP if possible.
So to an existing network that has files i want to add internet access capability. but users will have to log on so that their usage can be monitored. I have been searching around but maybe the search terms are wrong for what i need accomplished. i don't mind upgrading the ubuntu version to the server edition so long as i can use X11 forwarding atleast so that i can do remote monitoring. VNC is too slow, and using nautilus forwarded via X11 to my desktop sorts out most of my needs. The network provide has suggested maybe using pppoe but i am thinking if there was a welcome page based authentication system then it'd be more easy to monitor?
View 3 Replies
View Related
Apr 1, 2011
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
View 5 Replies
View Related
Sep 19, 2009
My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Jan 22, 2010
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies
View Related
May 13, 2009
I recently got one of these modems and it had discovered very serious detection problems. I had been using one of the Cricket PCMCIA modems but it had a problem of dropping connections every 30 seconds or so. Anyway, this modem works a lot better but there is a trick to get it working.
Since the modem has a built-in flash card reader and flash memory containing the Windows software, when you first plug the device in, it is detected by the OS as a flash drive rather than a modem. If you try to configure the modem at this point, it will be impossible since no modem will have yet been detected.
In order to get the device to be detected as a modem, it needs to be "flipped". The following thread from the Ubuntu forums discusses the details of the problem and contains a link to a utility to "flip" the device: [ubuntu] HOWTO: Cricket Wireless A600 Broadband Modem - Ubuntu Forums
Once the device is flipped, I configured it using YAST / Network Devices / Modems. Mine is detected as /dev/tty/ACM0. I use Kinternet to connect, though Network Manager may also work, but I have not yet tested it.
View 9 Replies
View Related
