General :: Unable To Connect Vodafone Usb Modem?
Mar 29, 2011i try to connect vodafone usb modem on it but m unable to connect
View 1 Repliesi try to connect vodafone usb modem on it but m unable to connect
View 1 RepliesI am new to linux (Ubuntu 8.10). I don't know anything about sudo commands. At the moment I am using windows to connect to the internet because I con't get my vodafone K3765 USB 3G modem instal om Ubuntu. There is only .exe installation files on the stick. Every thing I try I first have to download it to a disk, restart my pc in Ubuntu and then try it if it dus not work,I have to restart my pc in windows connect to the internet and ask again. I love Ubuntu but I need internet.
View 3 Replies View RelatedI couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedMy name is Mayan Viljoen & I am from South Africa. I am very new with Ubuntu and I don't understand why the Vodafone 3G modem HSDPA USB stick (model k3570-Z) which I recently bought should not like Ubuntu as much as it does Windows. I want to work on the Ubuntu side of my split hard drive rather than the Windows side. It is notoriously difficult to get connected to the net on the new Ubuntu with this 3G modem. Is it because it is really manufactured for Windows or is there another reason? It will only really connect approx. 1 out of approx. 8 odd times on the Ubuntu 10.8 Operating System, which is very annoying to me. What can be the reason for this? If it is that this modem was really made for Windows, what then is the best 3G modem and network to use with Ubuntu 10.8?
View 2 Replies View RelatedI'm an Ubuntu lucid user and i have AnyData adu 560d modem. i try to connect to the Internet using my modem, but ubuntu read it as usb, how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies View RelatedI'm an Ubuntu lucid user and i have AnyData adu 560d modem.i try to connect to the internet using my modem, but Ubuntu read it as usb tell me how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies View RelatedI can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
I have installed the 3 following pakages of Fedora 13 ozerocdoff-0.4-1.fc11.i386.rpm usb_modeswitch vodafone-mobile and after that I have given the command
vodafone-mobile-connect-card-driver-for-linux-debug
all I see after that :
vodafone-mobile-connect-card-driver-for-linux-debug
/usr/lib/python2.6/site-packages/twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[Code]....
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
I'm trying to connect to the Internet via my Vodafone phone in tethering mode, either directly or via wifi using a Netgear goggle but neither is working.
View 1 Replies View RelatedI want to get a vodafone internet stick, but "they" say I have to install: vmb_1.1.0-0_i386.deb, downloaded the file and get this error: Dependency is not satisfiable: libboost-serialization1.40.0 (>= 1.40.0-1) Now it turns out that I have libboost1.42.0 (1.42.0-4ubuntu2) installed...
Am I right in assuming that vodafone is to blame for the software not working?
Is there anyone who has got this software to work or has any tips?
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies View RelatedI have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedI am trying to connect to wireless broadband using SuSE 11.2 and a Huawei E160E USB modem, through Internode Australia.
Networkmanager does not seem to recognise the modem so I am trying other means. I believe I have got wvdial to connect (it reports a correct IP address, the light on the stick goes solid blue and I can ping external IP addresses). However it can't find a DNS nameserver and I can't work out how to provide one to wvdial, and therefore can't do anything through the connection (I would rather not revert to ifup because this laptop travels between WLANs). I followed swerdna's comprehensive instructions on setting up a wireless broadband modem in YAST, but I got lost on the very last instruction: KMenu --> KInternet. I can't find this on my application launcher.
I am using Linux Mint 9 Gnome: Isadora (since the same Network Manager applet is used in Ubuntu, I am asking the question here too)I was trying to configure my wireless card to connect my PPPoE connection by using the command pppoeconf wlan0 and also pppoeconf.I was not able to dial my PPPoE connection when connected via Wi-Fi. When I restarted my system, in the Network Manager, under Wireless Networks it says "Device not managed". Now I am not able to use my Wi-Fi card at all and cant connect to my Wi-Fi modem.
There is no hardware Wi-Fi switch, only the key combination Fn+F2 to enable or disable the wireless card.I have used the key combination Fn+F2 (which enables or disables the Wi-Fi card) many a times, but the same thing is displayed in the network manager.If I use LiveCD mode and use any distro even Isadora, the Wi-Fi works fine.My ethernet connection is working fine. I can connect to the internet if I connect my modem using Ethernet port.
I have installed and setup 3G which works perfectly fine. I use sakis3g scripts for connecting to 3G network. My VPN profile created with network manager (client/NetworkManager GUI) works well.
#cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',wlan0,&
Now when I do the same with using using ppp0 (which is after connecting to VPN) I get the following error messages. #cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',ppp0,&
[Code]...
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies View RelatedI installed Ubuntu 10.04 this morning and everything is working fine apart from one thing. I am unable to install my Speedtouch 330 modem on it and connect to the internet, I looked on the help pages and found this:
"Visit Ubuntu Packages Search and search for each of the following packages. Download them to a folder that is also visible from Ubuntu (or to a USB stick).
As I cannot access the internet I had to go back to windows, download them onto a memory stick, go back on to Ubuntu and install them. The first 12 worked fine and are now installed but number 13 and 14 wont allow me to update because "the dependency is un-satisfiable" does anyone know what this means and how I can fix it? I was also unable to get the USB ADSL Modem Manager too install either because of another error.
Tried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies View RelatedDue to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies View RelatedI've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
I've got an XP pro SP3 Vm in Virtualbox with Vodafone Mobile Connect installed. The USB dongle is detected by virtual box and I've tried passing it through with and without a filter enabled for it. Both times it was listed with the USB keyboard and mouse, all were greyed out. In Windows Ddevice Manager there's a entry for a USB Mobile Internet controller but the Vodafone Mobile Connect software isn't picking up the device. I'm using Ubuntu 10.04 and teh latest Virtualbox downloaded from the website with the PUEL extensions pack so I can have USB.
View 1 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have installed the files from Betavine - SuSE Linux Drivers and installed it by clicking the rpms and installing now the error is this- Vodafone Mobile Connect needs the following files and dirs with some specific permissions in order to work properly: /etc/ppp/chap-secrets should have 0660 mode, found 0666 /etc/ppp/peers should be readable and writtable by group root user Rob should be a member of group root
View 3 Replies View RelatedI've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?
View 2 Replies View Relatedhow to connect 3g modem with ubuntu 10.04
View 1 Replies View RelatedCan I connect my Linux PC to the Internet with a Nokia E71? I've looked for answers elsewhere but everything I've found refers to file synchronization, sending SMSs, playing with the address book, etc. I just want the Internet!
View 1 Replies View RelatedDoes anybody have ideas how to make this Vodafone Mobile Connect Card model GLOBETROTTER by Option work on this compaq nx9005?
Pictures of the beast:
Bonus points will be awarded if no closed source software is required.
Here is a method for connect usb modem in linux system.
I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link
I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+
Huwaie/ZTE Modem
Command Mode:
1) Check your NetworkManager rpm for Correct Installation
2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..
3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial
4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf
If this command can't detect your modem then try below commands
i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.
ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command
iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem
Now run the command given in step 4.
5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.
vim /etc/wvdial.conf
Change your username and password with internet/internet. Save and exit.
6) Now try below command..
wvdial
7) Open /etc/resolv.conf or execute below command
You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf
8) try to ping any site
If you get the response then you are all set for the modem, ENJOY SURFING with high Speed
GUI Mode:
Right Click on the Netowk icon on your status bar
NetowkManager > Mobile Brodband > Add
Simply follow the instructions given in GUI and setup your modem
Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,
If you face any problem then set SELinux ini permissive mode and then try.
I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..
I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
sudo lshw -C network
lspci -nn
lsusb
[code]...
I have configured my nokia 3230 as a modem on debian
Scanning your serial ports for a modem.
As u can see above my modem was gettin detected. but when i tried dialing it never got connected..
Iam sending the log file:
I am using a tata docomo connection.