I installed OpenSUSE 11.3 64 bit version on my Dell Laptop Studio XPS 16. My USB mouse is working nicely. However, as I inserted MTS USB MODEM, I found that device is not mounted. "dmesg" shows USB modem in sdb emulating as scsi10 drive. I tried with 'fdisk -l" which does not show the device. 'lsusb' shows the device ID. Itried to mount /dev/sdb to /media/disk after creating a directory /media/disk, but of no use.
View 9 RepliesI am trying to connect to wireless broadband using SuSE 11.2 and a Huawei E160E USB modem, through Internode Australia.
Networkmanager does not seem to recognise the modem so I am trying other means. I believe I have got wvdial to connect (it reports a correct IP address, the light on the stick goes solid blue and I can ping external IP addresses). However it can't find a DNS nameserver and I can't work out how to provide one to wvdial, and therefore can't do anything through the connection (I would rather not revert to ifup because this laptop travels between WLANs). I followed swerdna's comprehensive instructions on setting up a wireless broadband modem in YAST, but I got lost on the very last instruction: KMenu --> KInternet. I can't find this on my application launcher.
I have installed and setup 3G which works perfectly fine. I use sakis3g scripts for connecting to 3G network. My VPN profile created with network manager (client/NetworkManager GUI) works well.
#cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',wlan0,&
Now when I do the same with using using ppp0 (which is after connecting to VPN) I get the following error messages. #cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',ppp0,&
[Code]...
i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies View RelatedMy CD/DVD-drive used to work when I started using OpenSuse, but lately when I try to play a CD or DVD the icon doesn't show up and I can't open the disc using vlc.
It sounds that the system tries to mount the disc over and over and I get an error message that says "Couldn't mount audio disc (in Swedish)" (if that's what I'm trying to do) and it says something about a dbus error. Sometimes nothing happens at all when I put a CD in the drive.
I'm using OpenSuse 11.2 and Gnome 2.28.2 on an Acer Timeline 5810TG.
I first noted a few weeks ago I couldn't mount my NTFS partitions using dolphin. At the time I was having problems with windows, so I thought - naturally, they are marked as dirty, no biggie-
However, I still can't mount them and I know they are clean. I get the error: "filesystem is neither well know nor in /proc/filesystem nor in /etc/filesystems" which is strange since I can mount just fine in the console using mount -t ntfs-3g.
When I plug-in any kind of usb storage device an error massage appears
Unable to mount (name of the devise) DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending and the window of the devise opens several times. Everything working just fine, I can store files and read them, but I don't want to close all the windows that opens-up each time I plug some thing.
I am using Opensuse11 and i have created an lvm involving two disks /dev/sdb and /dev/sdc. I have created a lvm volume group of 5 GB with the above 2 disks. The problem is it is unable to mount at boot time. It is giving the following error messages:-
mount: special device /dev/TST_VOL/VOL1 does not exist
...
...
[code]....
i jsut installed opensuse kde and xfce and i cannot mount dvd/cd 's. i am using opensuse 11.3 32 bit. i added my user to the cdrom drive group but still no luck. How to get the cd to mount by jsut clicking on the dolphin icon?
View 9 Replies View Relatedbeen searching google and forums for about 5 hours now, and can't figure this one out, I have a server running opensuse 11.2 sharing various NFS directories, I have one laptop that is running 11.2 and I have no problem getting my NFS shares from the server.On my other laptop that is running 11.3, I had the shares working at one point, but changed things around and added a new HD to the server, now I can NOT get this thing to work, I have tried everything I could find to read on it. Started and stopped the NFS server and exportfs -a, and checked /var/logs/messages on server and nothing about this laptop (192.168.0.102 suse 11.3) trying to connect.On this laptop, I have deleted all the shares, and tried to re-add them but still get this error everytime.on server /etc/export:
/home/kryptic/ *(rw,no_subtree_check,sync)
/backup/Media/ *(rw,no_subtree_check,sync)
/backup/Dales_Backup/ *(fsid=0,crossmnt,ro,root_squash,sync,no_subtree_check)
[code]...
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedI'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies View RelatedI put a cd or dvd in and i get this error message "Unable to mount ..... Authentication is required" What's going on? i used to be able to do this no problems
View 1 Replies View RelatedI have two systems, one running 11.2 x64, and the other running 11.3 x64. on both systems, I've lost the ability to mount internal partitions "on-the-fly" from the Dolphin panel.Trying to mount via Dolphin has always given me this error on the 11.3 system, but only recently started happening in the 11.2 system after a recent "zypper dup" (using the "Stable" KDE 4.4 repo).If others are experiencing this same issue, please let me know so I can file a bug report. Please note that the error only occurs for internal partitions, and external drives work fine.
View 9 Replies View RelatedI double click "My Computer" and Konqueror goes to sysinfo:/I then try to click on one of my partitions (ones that are already mounted or ones that are not)eeted with the error;There is no application installed that can open files of the type block device inode/blockdevice).Do you want to try to install one?It goes through the repo and finds nothing.I love openSUSE and this one error is the only thing keeping me from being able to use this release.
View 9 Replies View RelatedPreviously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
By the way, I am using openSUSE 11.1.
I just upgraded from 11.2 to 11.3, everything seems to be working fine except that my other hard disk partitions are un mountable as my normal user. I used to be able to click on the drive in Dolphin and it would ask for the root password to mount it, but now it gives the error that the action is denied by org.freedesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result) What do I do to fixed this? I have checked as many settings as I can and can't find it. I would like to avoid editing the Policykit.conf file manually if possible (if that even is the right file).
View 6 Replies View Relatedbanshee seems unable to recognize and mount ipods. once connected they are seen by nautilus (and songbird) but not banshee..
View 4 Replies View Relatedi plug my camera into my laptop and it won't mount the camera's memory, when i plug the memory card directly to the laptop it mounts without problems.
1) a good DIVx/ wmv and DVD movies player?
2) audio/ mp3/ wav player
I have a Thecus NAS with nfs support running. Now I switched from OpenSUSE 10 to 11.2 on the client side and aren't able to mount my nfs shares. With SuSe 10.0 I didn't have any problems.
The /etc/exports:
/raid/home_nas1 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
/raid/soundandmore 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
On the client side I'm able to see the shares:
showmount -e nas1
Export list for nas1:
/raid/home_nas1 192.168.0.24/31
/raid/soundandmore 192.168.0.24/31
The client address:
inet addr:192.168.0.27
I'm using nfs-3:
mount -t nfs nas1:/raid/soundandmore/mnt
mount.nfs: access denied by server while mounting nas1:/raid/soundandmore
I am getting this error when trying to mount my client on the directory I exported in Yast2 NFS Server
View 9 Replies View RelatedI had to change the mounting properties of my disk partitions so i tinkered with the fstab file.. Now I am unable to mount the cdrom as a normal user..To mount the cdrom I had to login as root in terminal and use the following command:
Code:
mount /mnt/cdrom
The cdrom entry in my fstab file reads:
[code]...
I did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
View 9 Replies View RelatedI'm trying to get an external HD to mount on my Dell Laptop running OpenSuse 11.1. When I connect I get the following:
Quote:
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb 1-5: New USB device found, idVendor=0bc2, idProduct=0503
usb 1-5: New USB device strings: Mfr=54, Product=69, SerialNumber=95
[code].....
But am left scratching my head. I don't think its showing up in the etc/mtab - which i think it is supposed to?
- The icons in my desktop is always changing randomly upon startup
- Evince can't remember the last page i read before quitting
- Unable to mount usb automatically (have to do 'mount /dev/sdc1/ /media/usb' and 'df -h' every startup)
All of these problems happened just recently. I thought they were coming from unresolved packaging but after upgrading and distro-upgrading from packman only, and gnome, the problems still persist. If it helps, here's my zypper lr -d
[Code]...
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
My computer
AMD phemom II 955 X4 Black Edition 3,2 Ghz
Asus M4A785TD-M EVO micro atx
Kingston 4Gb Ram DDR3 1333 mhz (KVR1333D3N9K2/4G)
Disco Duro Western Digital 1 terabyte
LG GH24 Super Multi DvD rewriter
menu.lst
fstab
fdisk /dev/sda
Orden (m para obtener ayuda):
Bios
I have Sata=AHCI
Sometimes it starts and sometimes not. the RAM is memtest OK. The test detects a firmware in the micro hole 15 to 16 mb of memory. The rest is OK.
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View Relatedactually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies View Relatedubuntu is unable to find my huawei E160 modem driver when i insert it to my computer.
View 2 Replies View Related