Fedora Networking :: Sierra Modem 885 Compass - Install And Make It To Work In 7?
Aug 19, 2009i have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies
ADVERTISEMENT
OpenSUSE Network :: Configure The Sierra Compass 885 - Waiting For Authorization
May 24, 2010I have a 3G modem (Sierra Compass 885). When I attached it on my openSuse 11.2, the Network Manager has deteced it. After that, using Network Manager, I configure the connection by filling the Dial number, Username, Password, and IPN. When I click OK the connection status always says "Waiting for authorization" and never connected.
View 6 Replies View RelatedFedora Hardware :: Install Modem Sierra Wireless AC775 On Core 6?
Apr 26, 2010how to install the modem Sierra Wireless AC775 on Fedora Core 6. Fedora 6 detects the modem, but does not establish it as a device. And no entries in the directory /dev about modem. Startup Fedora 6 said that the initialization eth1 failed because no device serial_cs.
View 3 Replies View RelatedNetworking :: Make A Huawei K3715 HSDPA Modem Work In Ubuntu 10.04.1
Jan 20, 2011I'm trying to make a Huawei K3715 HSDPA modem work in Ubuntu 10.04.1. I plug it in, and it loads two mass storage devices (one CDRom containing the Windows software, and one 2GB drive that appears empty), but I don't really know where to go from here.
Note that I replaced the stock network manager with Wicd, as I find it more reliable in picking up wifi connections. I'm not sure if it's suitable for connecting the HSPA modem though.
Red Hat / Fedora :: How To Make The Modem Lights Toolbar Addon To Work
Jun 10, 2010How to make the modem lights toolbar addon to work? They don't seem to work while online with Gnomes KPPP, and it would be nice to see them working while online.
View 2 Replies View RelatedOpenSUSE Wireless :: Sierra Usb Modem - Attach To Ttyusb0 But Cannot Configure In Kppp?
Jun 28, 2010i have been able to get on line running other linux os using the terminal first i type sudo modprobe -r usbserial & enter followed by sudo modprobe usbserial vendor=0x1199 product=0x120 & enter the last command is sudo dmesg|grep -i ttyusb. I have done this for years and it always has got me on line after the above i open kppp and select for modem /dev/ttyusb0 and click to verify kppp recognizes my sierra wireless usb modem and that is all i have ever had to do, plug in the usb modem type the three commands it comes back with confirmation the modem is attached to ttyusb0, ttyusb1 & ttyusb2 in kppp i click /dev/ttyusb0 and click quarry and get on line with suse11.1 it is not so the first command sudo modprobe -r usbserial comes back with a fatal error but the second and third command give me the same results saying i have attached the usbmodem to ttyusb0,1 & 2. but i cannot configure it in kppp.
i have tried researching on line but cannot find a similar thread. I believe the way i described above has worked on lindows 5.0, and it is how i do it with Mint which i can get on line with today. so i hope one of the wonderful millions of linux users will direct me as to what i am doing wrong. i am running amd 785 4 gb ram msi mainboard ms-7549 my modem is sierra wierless modem 595u (vendor=0x1199 product=0x120) connecting through Sprint pcs which requires no user name or password.
Fedora Networking :: Make Run Modem On Laptop Compaq Presario C700?
Mar 20, 2009How to make run modem on laptop Compaq Presario C700? Modem is HDAUDIO Soft Data Fax with SmartCP com3.
View 4 Replies View RelatedFedora Networking :: How To Get The Dial Modem To Work
Feb 23, 2009My brother installed Fedora 8 on my 2004 Dell Inspiron 1000 laptop with a 56k MDC modem. I cannot figure out how to get the dial modem to work! Modem Device?, Baud Rate?, Flow Control?, Modem Volume?
View 1 Replies View RelatedFedora Networking :: USB Modem Does Not Work After Installation Of VirtualBox
Sep 19, 2009My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
Fedora Networking :: Modem ZTE MF636 Not Longer Detected In F12 / Get It To Work?
Mar 25, 2010I have a ZTE HSUPA USB Modem Model:MF636 which used to work great and then is not longer detected.
I am using Fedora 12 and was having problems with the modem not been properly detected and filed a bug, which turned not to be a problem of NetworkManager, but an issue with udev.
https://bugzilla.gnome.org/show_bug.cgi?id=603433
I followed instructions to edit /lib/udev/rules.d/61-option-modem-modeswitch.rules and then it worked fine.
Now the modem is again not properly detected. Here is a copy of the results from dmesg code...
I have tried restoring the file that I edited. It was back to the stated previusly reported. I also have tried to run an older kernel. Then I updated to the latest kernel available for Fedora 12. Nothing seems to work.
Ubuntu Networking :: Install Modem Driver For The Alcatel X200 USB Modem?
Mar 23, 2011find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
Debian Configuration :: Unable To Make Huawei E1750 Wireless Modem Work With Lenny
Oct 10, 2010I've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:
DefaultVendor= 0x12d1
DefaultProduct= 0×1446
TargetVendor= 0x12d1
[code]....
Fedora Networking :: Install Modem Usb - Sometimes There Is No Reaction At All
Nov 8, 2010I have a modem PROLINK PHS 100. sometimes when I plug in the modem, can be used. sometimes there is no reaction at all. What should I do.
View 2 Replies View RelatedGeneral :: How To Install Sierra Aircard 312u
Apr 18, 2011I am using kubuntu 10.10. My system certainly picks it up, but research indicates that installation should be pretty automatic.
View 1 Replies View RelatedUbuntu Networking :: Sprint Sierra 250U 3G Only?
Sep 25, 20101 In terminal...App > Acc > terminal sudo gedit /etc/modules under lp, add the word: option make no other changes file > save >quit 2 sudo gedit /etc/rc.local
under #By default add: echo "1199 0301" > /sys/bus/usb-serial/drivers/option1/new_id
make no other changes file > save > quit you are set up for 3G. 4G will probably be set up in Meerkat
Ubuntu Networking :: Can I Make Calls Using Dialup Modem
Mar 12, 2010I have a dial-up modem in my Laptop.
Also I have a Dial-up line[Base Phone].
Can I make calls from Dialup modem [Making & Answering calls]?
Fedora Networking :: WUSB54g Stopped Working - How To Make It Work
Feb 17, 2010My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)
firmware: isl3887usb
firmware: isl3886usb
dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like
bus 002 device 001: ID... linux foundation 1.1 root hub
bus 001 device 003: id... linksys wusb54g wireless adapter
[code]....
When I start up, in boot messages I get something like this
WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release
Device wlan0 does not seem to be present, delaying initializtion [FAILED]
Fedora Networking :: Configure Pppoe In 11 & Make It Work Automatically After Restart?
Jun 13, 2009My network is windows pppoe. How can I configure it for Fedora 11? Is there any graphical configuration tool available for that? Also, ubuntu 9.04 logs into pppoe network after restarting as I've made some changes in /etc/network/interfaces. Is there any option available for Fedora 11 to automatically log in to pppoe network after restarting?
View 4 Replies View RelatedFedora Networking :: Make A D-link Dwl-650+ Pcmcia Card Work Through Ndiswrapper?
Jul 29, 2009I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
Networking :: Unable To Use Sierra Wirelss AC850 Under Ubuntu 10.04 (addendum)?
Dec 13, 2010I'm starting a new thread, because the one I started a few months ago does not appear to be getting any responses. To see the previous thread: [URL] I've come a bit further than then. The chat script now has the AT_OPSYS command removed as a result of my experiments talking to the card directly with screen /dev/umts. The script /etc/ppp/peers/eplus now looks like this:
Quote:
-detach
/dev/umts
460800
debug
[code]....
what so ever what in the blue blazes causes my card to hang up as soon as a connection is made?
Networking :: Install Broad Band Wireless Modem (netgear)ADSL2 On Fedora Core 7
Jul 29, 2010how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies View RelatedUbuntu Networking :: Can't Get 3G Modem To Work
Jun 24, 2011I am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
Ubuntu Networking :: Set Up JVJ 3G Modem - URL Doesn't Work
Aug 30, 2010I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?
View 4 Replies View RelatedUbuntu Networking :: Vodafone Usb Modem Can't Work On 10.10?
Mar 26, 2011I can't using my usb modem on ubuntu 10.10.
I use vodafone usb modem, without detail information of what type or chipset used.Here is what I can collect, when I plugged the usb modem to laptop..
result of dmesg..
---start---
[ 956.873758] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 956.974318] scsi5 : usb-storage 1-1.1:1.0
[ 957.974336] scsi 5:0:0:0: CD-ROM HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 957.975167] scsi 5:0:0:1: Direct-Access HSDPA MMC Storage 2.31 PQ: 0 ANSI: 2
code....
how can I troubleshoot the problem, so the usb modem can work properly.
Networking :: HSF Modem Driver Will NOT Work With Ubuntu 8.04
Mar 18, 2010I have a Compaq Presario 2100 laptop running Ubuntu 8.04LTS. It has a Conexant HSF modem/chipset, for which I bought the Linuxant HSF modem driver- 56K max.It is installed and it "functions",ie: it will connect to my ISP and I can start to browse (Firefox), but it will inevitably disconnect itself. At this point it is always down to "turtle speed of 4800bps".I have consulted with Linuxant Support and they suggested different modem init. strings - mainly different modulations - V34,V90,V92 w/variations. Nothing has made any signif. diff. They won't offer any further help.My question is: Could it be that Ubuntu 8.04 specifically, or Ubuntu of any version, is the source of the problem??
I have Knoppix 5.1.1 Live CD which loads up fine, and I was hoping to try the HSF driver with it, but I need to get Kernel Source pkg. and that will take 2+ hrs. to download by dialup , so haven't tried it yet.
Ubuntu Networking :: Verizon Svcs Using GOBI 2000/Sierra Wireless Card On 9.1?
Apr 15, 2010I bought a Toshiba NB305-410BN-G and it has an internal Sierra Wireless GOBI`2000 HS - USB Mobile Broadband Device 9001. This works fine providing wireless internet over Verizon's cellular service using Windoze 7 Starter os. I installed Ubuntu 9.1 (canonical) on the NB305 and I found a network device GUI that allowed me to configure "Mobile Broadband" for Verizon and allowed me to check a little box to automatically start the service. This action does not provide me with Verizon on Ubuntu. When I looked at the devices, I cannot see the gobi 2000.How do I get the gobi to work on 9.1?
View 9 Replies View RelatedUbuntu Networking :: Application - Make Phone Calls And Send SMS Via Mobile Broadband 3G Modem
May 1, 2011Is there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies View RelatedUbuntu Networking :: Get Bigpond Internet USB Modem To Work With 10.4 LTS?
Jun 9, 2010How do I get my Bigpond internet (ZTE MF636 BP) USB modem to work with Ubuntu 10.4 LTS ?
View 1 Replies View RelatedGeneral :: Getting A USB Modem To Work With Fedora 13?
Feb 22, 2011I have tried to get several USB modems to work with Fedora without success. Some time ago I was able to get a Maxon BPS6 to work but I no longer have that unit. I have tried a ZTE 636 which is recognised by the system and have run usb_modeswitch to make it be recognised as a modem and not a cdrom. Seems that what ever I do the modem produces an error - unable to connect to modem.getting my modem working on a completely fresh install of Fedora 13
View 2 Replies View RelatedUbuntu Networking :: Modem Upgraded - PPPoE Config Won't Work
Jun 23, 2010I've been using an old modem from 2007, which my ISP calls Type I. It didn't have wireless connectivity and I used pppoeconf to setup my connection - username and password and set it to connect at boot time and everything was fine till today. I bought a Type II modem from my ISP and had to return the type I modem to them. Since the technician had no knowledge of Ubuntu (or Linux in general), he configured the modem in Windows 7, tested that the connection was working, tested the wireless connection in my netbook running XP and then he left.
Now I can't connect through pppoeconf in Ubuntu (running 9.10). The terminal says eth0 is listed but the 'access concentrator' or something like that isn't responding (no other process was running at that time). I feel very vulnerable while browsing in Windows so I want to get back to Ubuntu ASAP. Oh, and here's the output when I run "dhclient eth0"
Code:
Listening on LPF/eth0/00:16:76:33:d2:70
Sending on LPF/eth0/00:16:76:33:d2:70
Sending on Socket/fallback
DHCPDISCOER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 192.168.1.5 from 192.168.1.1
[Code]....