How do I installed a sprint novatel 3g modem? I see sprint under the mobile broadband tab when I create a new connection, and it shows all the right information, but I never can connect.
View 1 Replies
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedI have a Sprint U760 air card that apparently works under Linux. Sprint has a guide: "Wireless Mobile Broadband Setup Guide for Linux OS" that I am using to setup the air card. When I go through the procedure in the manual for "Setting Up PPP Using KPPP" the last task is to query the modem to see if Linux recognizes it. When I do the query I get a response "unable to open modem". I have tried going back through the PPP setup but still get the same response.
View 8 Replies View RelatedI'm using a 'ice.net' D-50 (CDMA EV-DO rev A) mobile broadband USB modem, also sold as Cmotech CNU-680 in other areas. The modem is connected to a USB port on a hp8710w mobile workstation.
As the 11.2 Gnome Network Manager won't connect this modem to Internet (see my first post here), I have downloaded and installed a 'D50 Modem Manager program' from [url]
After unpacking and installing this cmotech-qtmodem-1.6-1.i586.rpm package for suse on 11.2 x86_64, the gui application 'D-50 Modem Manager' is found in the Internet Group.
However, neither this program does connect the D-50 modem really on 11.2 x86_64 (as it did on 11.1 x86_64). Tried both traditional network setup and with Network Manager.
Any idea and suggestion how to trobleshoot this further? I think I've seen that a newer version cmotech-qtmodem 1.9 has been mentioned on the web, but without being able to find and download this version.
Command output as follows:
As normal user:
On the Modem Manager gui: D-50 modem is ready
From Login script Debug window:
As root:
It seemed like the modem connected, but Firefox was not able to connect afterwards (Server not found)
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies View RelatedI've been trying to get a USB modem stick to work with Karmic.The modem is the ZTE MF626 HSDPA on a Telstra Next G plan.I've followed all the guides and links on the forums:Have deactivated the CD autorun on the USB stick in XP lsusb is showing "Bus 002 Device 003:ID 19d2:0031 ONDA Communication S.p.A." demsg is showing "usb 2-2: GSM modem (1-port) converter now attached to ttyUSB1"This seems stable as well, ie checking periodically it doesn't seem to be disconnecting By the way,the blue light indicating network communication/modem active lights up after the device has been plugged in for a second or so.
When I go through Network Connections and add a new mobile broadband connection, there is nothing listed in the "Create a connection for this mobile broadband device" drop-down on the first configuration screen - all the guides I've read say that it should be listed here, but none say any debug steps if it doesn't.Some other guides for older versions of Ubuntu and earlier versions of the modem reference a "/usr/share/hal/fdi/information/20thirdparty/20-zte-mf626.fdi"file which I don't have.
I am trying to switch to mobile broadband, Ubuntu 9.10, Huawei E1750 modem, provider Telia Sweden. So far I tried this:
(previous: tried to get started with an Option Icon 550 modem, but could not do it. Ubuntu froze completely, networkmanager refused to see the modem after this. Read somewhere that it is (next to) impossible with Ubuntu, but Huawei is a better chance. Maybe I changed some settings on the way, went and got a Huawei)
-connected modem, nothing happened
-rebooted to Windows Vista, installed modem
-rebooted to Ubuntu networkmanager sees the modem, when I select it, it gives a message 'GSM network, disconnected'
Also: Ububtu sees the usb stick as a folder
I tried to use multiple mobile broadband modems in ubuntu 10.10 and encounter a bug as follows:
When i plug in a new modem, all the attached modem is automatic go offline ( thus my connection is down), and try to redial back, sometime the redial is successful, sometime it's not.
It was working fine in ubuntu 9.10, plug in a new modem, all attached modems stay connected.
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedIs there a way to make phone calls and send SMS via mobile broadband 3G modem, i mean an application for the 3G modem which is similar to the one provided for windows by the manufacturer?
View 2 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
I use modem novatel wireless ovation mc935d. when i try to use lsusb, my modem is detected. but when in network configuration manager is'not detected.
View 2 Replies View RelatedI have a Novatel 760 broadband USB device and I use kppp to connect though it is extremely slow (ping takes 100ms). What I need is a way to make kppp connect on reboot without any interaction from the user. I have looked on the Internet, but I did not find anything useful. I am using kppp because I could not get gnome-ppp to connect and it does not seem to have the features of kppp.
View 1 Replies View RelatedI had previously been sharing my ethernet connection over wireless using Hostapd & dnsmasq on my headless server as this tutorial shows: here which had been working fine. I now wish to share my USB mobile broadband over the wireless. I using a ZTE MF112. I was able to get the connection working using the application wvdial.
- Firstly I had to create a hard link between /dev/gsmodem & /dev/modem
- wvdial then made a new connection ppp0 which would work for internet access.
Changing the interfaces to have the br0 port like so:
Code:
iface br0 inet static
address 192.168.1.1
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
bridge-ports eth1 ppp0 wlan0
Flushing the IPTables & then adding:
Code:
iptables -A FORWARD -i br0 -s 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -A FORWARD -i ppp0 -d 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
Doing so works fine, but I'm not entirely sure how to make this all automated. I could try making a script to launch, but I don't have a huge amount of experience writing scripts. Is wvdial the best application to use? Keeping in mind I'm using a headless server. I use Squeezebox server & the scrobbling didn't seem to be able to connect to last.fm. Do I need to specify which connection Squeezebox uses?
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
View 7 Replies View RelatedI just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
Code:
$ lspci
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Atheros Communications Inc. Device 002c (rev 01)
[code]....
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
I need to find a driver for a Sprint 3G/4G modem. I am running 9.04.
Sprint lists this as a U300 but the actual part is a Franklin Wireless FW300DOWMX.
lsusb shows this as ID 16d8:6002 CMOTECH Co., Ltd. and ID 0409:005a NEC Corp. HighSpeed Hub
so my box can see the part.
If I can get just the 3G working that would help a lot. I would be happy to do beta, even alpha, testing.
I have a sprint usb 3g modem that plugs in via usb. I want to be able to share that Internet though an Ethernet port so I can connect another PC or my playstation so I can steam movies or just use the INTERNET on another puter. Iv tried lots of stuff I found on Internet like firestarter for one but it doesn't want to set up right.
View 4 Replies View RelatedI got Mint 7 running on my Laptop, a Pentium 4 by Dell. It dual boots XP as well. But the mobile broadband which connects by the USB port only works in XP. There are small windows that say it will not run. Errors. How can I get this working in Linux?
View 1 Replies View RelatedI have internet access using mobile broadband and i also have a wireless network for home usage without internet access.
When my wireless network is connected every application in ubuntu (Meerkat) tries to use it for inernet access (as neededobviously). As soon as i disconnect from the wireless network (and assuming the mobile broadband is on) everything has access to the internet again using the mobile brodband.
How do i tell ubuntu that i don't want it to use my wireless network for internet access?
I have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
enable my usb media? such as Usb Flash Disk, Usb Mobile Broadband, Usb Modem, etc. when i run lsusb on my server 9.04, here is the output :
[Code]...
my flashdisk is Kingston Technology Data Traveler 2.0
I want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
I need help on how to install Telstra Bigpond Mobile broadband . The dongel is a ZTE model MF633BP+ Mobile Card. I have tried with Ubuntu 10.10, 10.04 and 9.10 but all I can get is a message saying it is disconnected. The computer is a modified Optima with a new motherboard, RAM and power supply with a 120GB hard drive.The hard drive is empty so which of the Ubuntu models suits a geriatic old fart of 67 like me who has only low computer skills.
PS I think I have also sent this request to a wrong address on these forums.
I have a Vodafone mobile broadband dongle for the United Kingdom. The installation software is for Windows and Macs only. In Windows it works fine. If I plug the dongle in the USB in Ubuntu then it is recognised but the installation does not start (quite understandably). So I tried using wine with the Windows executable. It starts off promisingly, then hangs. Some files are created along with desktop icons but the installation does not complete.
I have seen here (http://ubuntuforums.org/showthread.p...light=vodafone) the comment that Vodafone installation can be tricky. So, can any kind person tell me if it is possible to get Vodafone dongles working under 10.04? Also, are there any other UK broadband pay-as-you-go dongles that will work? I have seen in a very recent post that "3" seems to be plug-and-play?
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedI need help with connecting to cdma mobile broadband for a tethered samsung phone. When I first installed Suse the phone icon on the network manager icon was all i needed to do to connect to the cdma network.After rebooting later the icon is gone and i cannot manage to connect. The connection is still there, but it is as if the computer no longer recognizes my phone as a modem. Well sense i just installed i figured lets try reinstalling to see if it was a bad installation. It happened exactly the same again. If anyone has any idea how to get network manager to allow me to connect to the internet again i would be grateful.
specs:
toshiba satilleite l305
Suse 11.3
Samsung R560 (Samsung Cdma Technologies)
Is it safe to get upgrades via wireless broadband modem?
View 1 Replies View RelatedIs it safe to get upgrades via wireless broadband modem?
View 2 Replies View Related
