I am having Dell Inspiron Laptop with Windows 7 and Ubuntu 10.04 installed in it. It is not connecting to network using Mobile.bluetooth. here are the informations. Nokia A110 - Classic BSNL Connection. Plan name is All at 49 Dell Inspiron Laptop Using Ubuntu 10.04 Error Message "Service not supported"..With Windows 7 it is working fine Can you pls help to resolve this, i need to connect to network from Ubuntu also.
View 1 Replies
I have ZTE's 8700 800M EV-DO modem provided by BSNL. It worked like charm on my uBuntu 10.04 LTS. I simply used it through 'mobile broadband' connection in uBuntu. However, few days ago, I had connection problems and technicians from BSNL resolved it. The connection works just fine in Windows 7, but now it does not work in uBuntu.
Now the dialer simply tries to connect and gives up after some time. I've even tried downloading the ZTE's dialer from the official site, but it does not work (connects, but does not work; shows 0kbps all the time).
What is the recommended way of fixing this? If more information is needed, let me know. I just love to surf the net through uBuntu.
way of life and am having trouble accessing the internet.
View 6 Replies View RelatedI have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I have bsnl broadband connection in dual mode in windows no problem but in ubuntu I cant create a broadband connection. I want to connect in dial up mode.
View 3 Replies View Relatedi have tried several methods to connect to internet but nothing has worked
details
ifconfig
eth0 Link encap:Ethernet
HWaddr 00:04:61:5e:ab:9c
[Code]....
I can't use Internet with BSNL Clarity II A phone in ubuntu 9.10.I am a new user.Expect detailed step by step narration .
View 1 Replies View Relatedhow to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedI live in india and I have a BSNL 3G dongle. I am using it on my laptop. I would like make phone calls using it. I was able to sends sms but no luck on voice call. In windows they provided a software for making voice calls, so the hardware supports it.
View 1 Replies View RelatedI have got my bsnl broadband few weeks ago. It is running nicely on my ubuntu lucid desktop. But form past few days I'm unable to browse some of my websites from ubuntu. I have dual boot my pc wiht Microsoft Window XP(original). The websites which are not opening in ubuntu are easily opening in xp. I have changed the DNS servers to 8.8.8.8 and 8.8.4.4 and also my MTU to 1452 but nothing is happening.
View 9 Replies View RelatedUbuntu 11.04 isn't detecting BSNL 3G USB Datacard. I was using 10.04 earlier & could easily install it then. But now 11.04 isn't detecting the USB datacard, so I'm unable to connect to internet for updates
View 9 Replies View Relatedjust i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
View 2 Replies View RelatedI use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I am using Ubuntu 9.10 . And Using BSNL broadband I want to know that how to create new connection using username and password as we do it in windows.I have used pppconfig command but it gives me error that no dialer found d tell me how to create dialer in Ubuntu 9.10
View 9 Replies View Relatediam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies View RelatedI am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
How to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal [tanmoy@localhost ~]$
4. Type su -l and enter
5. You have to Type your Password as a super user.
[tanmoy@localhost ~]$ su -l
Password:
[root@localhost ~]#
6. Plug in the USB DATA CARD.
7. Write lsusb and press enter for acknowledgement of detecting the USB device.
[root@localhost ~]# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I started using linux ubuntu version9.04 2 days ago...And I am facing difficulties in configuring or using my bsnl ZTE CDMA 2000 IX EV-DO wireless data terminal in ubuntu... I can't install gnome-ppp on my system... installing it in offline mode. Also,I tried the following commands:
$ sudo aptitude update
$ sudo aptitude install wvdial gnome-ppp
# lsusb
#modprobe usbserial vendor=0x19d2 product=0xfffe $ sudo nano -w /etc/wvdial.conf
I made the following changes in my wvdial.conf file,
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
[code]...
I am getting an error message as:
Wvdial configuration 1.60
/dev/modem: command not found
/dev/modem: command not found
/dev/modem: command not found
I have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies View RelatedHow to connect bsnl 3g data card in fedora14. i tried with mobile broadband connection but it is not working
View 4 Replies View RelatedWe've had reports of websites that don't work with Linux. Most could be used by setting a suitable UserAgent string but this one is extreme.
BSNL is India's national telecommunications utility and ISP. The same one that apparently injected HTTP packets to take newly authenticated users to one of their advertising sites as described in this LQ thread.
Now they have introduced a new site where ADSL customers can review their usage. A useful facility when the cost of exceeding monthly transfer is punitive and average incomes are low. But it is not useful for everyone. It is not useful for Linux users. The currently supported OS and browser combinations are "Internet Explorer on PC" and "Safari and FireFox on Mac".
I tried with Firefox, Opera and SeaMonkey on Linux. In Firefox I tried a variety of UserAgent strings but none of them got the logon page to work.
Technically speaking, how can this be happening? If Firefox works on Mac (IDK which versions of either) why would it not work on Linux? Where/how might the OS get involved in a browser rendering HTTP/HTTPS data?
Here's how the three browsers behaveFirefox with JavaScript turned off: the site displays "Scripting is used to manage data interactions between the Siebel server/Web Server and the User Interface. This requires JavaScript to be enabled in the web browser". Firefox with JavaScript enabled and SeaMonkey: both display the URL SWEHo=selfcare.sdc.bsnl.co.in but go into an infinite wait. Opera doesn't display anything.
For the curious who would like to explore, the URL is [URL]
How to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal
[code]....
to setup BSNL's WLL modem
Model is Linktop CT800P. Device is detected as "FWP USB Modem 3197" in Windows XP.
I've setup this device in Windows XP, but unable to do the same in Linux.
last night i have install SUSE 11.2 from the live CD. I have dual boot system with windows.Here is the problems.....i m able to access internet using same connection in windows but unable in suse.
View 3 Replies View Relatedi need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies View RelatedHow to set up a bsnl bridged internet connection wth username and password in kubuntu 10.10 ? i tries pppoeconfig but it didnt give me any solution.
View 4 Replies View RelatedI found lots of pepole who belongs to India and using BSNL Data card wants to connect Internet from fedora so I thought post a thread which will help all how are using BSNL EVDO Data Card. At first click on application - System Tools - Terminal enter the following code on your terminal
Updated part starts here When I was using Fedora 10 I post this thread on that time gedit worked properly with "su" Now here if you are using Fedora 14 and by using su gedit is not appearing then try
Code:
su -
instaed of only "su" hope gedit will work properly. If dose not work then you can follow the next post instructions. Or you can ask in the forum for I am updating "su" by "su -" If you are using earlier version you can try by only "su" or "su-" if none of this works then follow next post. Just remember you have do this in a single terminal and step by step to avoid maximum uses of "su" or "su -"
[Code]...
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View RelatedI have a Dell Latitude D530 Laptop (500 GB HDD). Installed Windows XP and then Ubuntu 10.10 to do dual boot. everything works fine in Windows XP.In Ubuntu 10.10 I had issues connecting to Internet(Through Wirelss), I was able to rectify this issue by dsiable ipv6 from firefox about:config and setting true to network.dns.disableIPv6. After this I was able to connect to internet and browse websites from Firefox.But I am having Issues with Evolution Mail(Connection Timed Out) and Google Talk Client(Connection Timed Out).Empathy Internet Messaging gets connected fine.I was wondering if I will have to disable IPv6 System wide and hence I added the following lines to /etc/sysctl.conf
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
