Ubuntu 11.04 isn't detecting BSNL 3G USB Datacard. I was using 10.04 earlier & could easily install it then. But now 11.04 isn't detecting the USB datacard, so I'm unable to connect to internet for updates
View 9 Replies
I am using redhat linux os rhel 5.3. i am not able to connect to internet via my new tata indicom datacard in this operating system...how can i configure it to work...i am using vmware to run this operating system...
View 2 Replies View RelatedI have bsnl broadband connection in dual mode in windows no problem but in ubuntu I cant create a broadband connection. I want to connect in dial up mode.
View 3 Replies View Relatediam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies View RelatedI use bsnl evdo AC8700 800M....It could be configure with Network Connections in Ubuntu 9.08 perfectly....but after I update my system to 9.10 & its stop working.......you know what happened???here is the o/p of 'lsusb' command..
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 05c6:6000 Qualcomm, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies View RelatedI have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View Relatedi need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Replies View Relatedto setup BSNL's WLL modem
Model is Linktop CT800P. Device is detected as "FWP USB Modem 3197" in Windows XP.
I've setup this device in Windows XP, but unable to do the same in Linux.
I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
Code:
dmesg | grep -e 'tty' -e 'modem'
is:
Code:
[ 0.000000] console [tty0] enabled
[ 11.098238] USB Serial support registered for GSM modem (1-port)
[ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected
[code]....
last night i have install SUSE 11.2 from the live CD. I have dual boot system with windows.Here is the problems.....i m able to access internet using same connection in windows but unable in suse.
View 3 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
way of life and am having trouble accessing the internet.
View 6 Replies View RelatedI am having Dell Inspiron Laptop with Windows 7 and Ubuntu 10.04 installed in it. It is not connecting to network using Mobile.bluetooth. here are the informations. Nokia A110 - Classic BSNL Connection. Plan name is All at 49 Dell Inspiron Laptop Using Ubuntu 10.04 Error Message "Service not supported"..With Windows 7 it is working fine Can you pls help to resolve this, i need to connect to network from Ubuntu also.
View 1 Replies View Relatedi have tried several methods to connect to internet but nothing has worked
details
ifconfig
eth0 Link encap:Ethernet
HWaddr 00:04:61:5e:ab:9c
[Code]....
I can't use Internet with BSNL Clarity II A phone in ubuntu 9.10.I am a new user.Expect detailed step by step narration .
View 1 Replies View Relatedhow to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedI live in india and I have a BSNL 3G dongle. I am using it on my laptop. I would like make phone calls using it. I was able to sends sms but no luck on voice call. In windows they provided a software for making voice calls, so the hardware supports it.
View 1 Replies View RelatedI have got my bsnl broadband few weeks ago. It is running nicely on my ubuntu lucid desktop. But form past few days I'm unable to browse some of my websites from ubuntu. I have dual boot my pc wiht Microsoft Window XP(original). The websites which are not opening in ubuntu are easily opening in xp. I have changed the DNS servers to 8.8.8.8 and 8.8.4.4 and also my MTU to 1452 but nothing is happening.
View 9 Replies View Relatedjust i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
View 2 Replies View RelatedI just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I am using Ubuntu 9.10 . And Using BSNL broadband I want to know that how to create new connection using username and password as we do it in windows.I have used pppconfig command but it gives me error that no dialer found d tell me how to create dialer in Ubuntu 9.10
View 9 Replies View RelatedI am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.
How to Configure BSNL EV-DO Data Card in Fedora 11 :
1. Click on Application.
2. Go to System Tools
3. Go to Terminal [tanmoy@localhost ~]$
4. Type su -l and enter
5. You have to Type your Password as a super user.
[tanmoy@localhost ~]$ su -l
Password:
[root@localhost ~]#
6. Plug in the USB DATA CARD.
7. Write lsusb and press enter for acknowledgement of detecting the USB device.
[root@localhost ~]# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I started using linux ubuntu version9.04 2 days ago...And I am facing difficulties in configuring or using my bsnl ZTE CDMA 2000 IX EV-DO wireless data terminal in ubuntu... I can't install gnome-ppp on my system... installing it in offline mode. Also,I tried the following commands:
$ sudo aptitude update
$ sudo aptitude install wvdial gnome-ppp
# lsusb
#modprobe usbserial vendor=0x19d2 product=0xfffe $ sudo nano -w /etc/wvdial.conf
I made the following changes in my wvdial.conf file,
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
[code]...
I am getting an error message as:
Wvdial configuration 1.60
/dev/modem: command not found
/dev/modem: command not found
/dev/modem: command not found
I was having no problems (that I knew of) browsing the web since installing Ubuntu 10.10 a week or so ago. I was previously trialling Win7 as my customers will likely be using that in the future. Then I wanted to go to internode.on.net. Got the following: Quote: Firefox can't establish a connection to the server at internode.on.net. or Quote: Oops! Google Chrome could not connect to internode.on.net
As it was just after Christmas I thought it must be down, for upgrades or maintenance etc. I later tried to go to Freebsd.org; same error. I've been having a small number of other websites give the same error. I thought nothing of this until I tried it on my wife's macpro. I could log onto all the websites I wanted to and none gave any indication of having been down. Both boxes are on the same adsl connection. I still can't access internode or freebsd on 10.10 yet have been able to access every website on OSX. Now, I was only looking at them for info but am worried I won't be able to access something important. (so far everything I 'need' is working)
ping just drops out. edit: weirdest thing! I just retried and now can not emulate the problem for internode. freebsd still won't show. that is less than five minutes between problems and resolution! I hadn't even posted! But I still would like to have an idea of what is going on. Here is the ping error for freebsd: Quote:
[Code]...
I have Karmic Koala and together with my neighbours we have a W-LAN which I was always using without problems. Now, a couple of weeks ago, my neighbour has changed the password to this W-LAN and since then ubuntu is unable to connect. The network is being recognized, but after the request to unlock a key for the network manager (besides, how can I unlock it once for all?) there comes the window with the request for the network-password, after typing it (correctly), nothing happens. The request for the password comes two more times and then ubuntu states that it is unable to connect.
- We have changed the password again - didn't help
- On Windows I and my neighbours get the connection
- My Ubuntu is able to connect to all other W-LANs
I have an Ubuntu server dedicated to running an openVPN server on my VMware ESX 4 host. On my Windows clients I am able to connect to the VPN; however, on my Ubuntu 10.10 workstation I am unable to connect. Here is what I have done. I have network-manager-openvpn and dependices installed as well as the openvpn package. When I hit the add button in the network manager for VPNs, I fill out all the needed information, but am unable to hi the apply button. I have also tried using the openVPN method for connecting. I download the client.ovpn file from the VPN server, and issue the following command:
Code:
openvpn --config client.ovpn
It asks me for the authentication user and its password and produces this:
Code:
Mon Nov 15 21:37:20 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Nov 15 21:37:20 2010 Control Channel Authentication: tls-auth using INLINE static key file
Mon Nov 15 21:37:20 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
[code]....
