Red Hat / Fedora :: Connect Bsnl Dataone Broadband With DSL Tried Above Procedure But Connection Get Failed?
May 9, 2011i need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 Repliesi need help to connect bsnl dataone broadband.with DSL.i have tried above procedure but connection get failed.
View 2 RepliesI have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
i have tried several methods to connect to internet but nothing has worked
details
ifconfig
eth0 Link encap:Ethernet
HWaddr 00:04:61:5e:ab:9c
[Code]....
I have bsnl broadband connection in dual mode in windows no problem but in ubuntu I cant create a broadband connection. I want to connect in dial up mode.
View 3 Replies View Relatediam install ubuntu 9.10 i want to connect my bsnl broadband internet
View 3 Replies View Relatedjust i installed ubantu linux 10.4 lts , how can i connect this system to internet? I have BSNL broadband (DSL modem conn to ethernet port) modal quidway wa1003a
View 2 Replies View RelatedI use Nokia N900 under T-Mobile as a broadband modem. It is connected via USB. There was no connection problems under 10.04 or 10.10. Now I have installed Ubuntu 11.04, and I cannot connect any more.
Here are the log messages that I get when trying to connect:
Code:
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> Activation (ttyACM0) starting connection 'T-Mobile Internet'
May 30 14:32:06 ubuntu-sager NetworkManager[759]: <info> (ttyACM0): device state change: 3 -> 4 (reason 0)
[Code]....
last night i have install SUSE 11.2 from the live CD. I have dual boot system with windows.Here is the problems.....i m able to access internet using same connection in windows but unable in suse.
View 3 Replies View RelatedI have got my bsnl broadband few weeks ago. It is running nicely on my ubuntu lucid desktop. But form past few days I'm unable to browse some of my websites from ubuntu. I have dual boot my pc wiht Microsoft Window XP(original). The websites which are not opening in ubuntu are easily opening in xp. I have changed the DNS servers to 8.8.8.8 and 8.8.4.4 and also my MTU to 1452 but nothing is happening.
View 9 Replies View RelatedHow to connect bsnl 3g data card in fedora14. i tried with mobile broadband connection but it is not working
View 4 Replies View RelatedHow to connect Ubuntu to the Internet through a broadband connection? I decided to give Linux a try, and I picked the Ubuntu variant. I have some problems with the Internet connection though. I have a broadband (modem-less) PPoE connection, and all the info needed in order for me to connect are the username and password (which I have).
View 2 Replies View RelatedI just installed Ubuntu in my PC and I tried to connect to internet using broadband connection. I use a ADSL router with WiFi access point to connect with network and dial my username and password using my computer to connect to internet.I could so it easily on windows 7 from Network and Sharing center and Setting up new connection or network and connect to internet using broadband internet.How can i do it with ubuntu 11.04 ?
View 9 Replies View RelatedI have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies View RelatedI've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies View RelatedI am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
[Code]...
I am using ubuntu 10.10. I am planning a skype meeting this morning. I have just installed skype 2.1 beta when I tried to sign in I get takes long time and at the end I get p2p connection failed. can there be some other applications that use are using skype port ? if so how can I detect this ?
View 3 Replies View RelatedI've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following:
Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise
Changing the SSID, broadcasting to ON, changing the SSID name
I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says
Problems occurred during the network connectivity test
This can be caused by invalid network config or problems w/ your momde / router
Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
Server details :
Red Hat 4.1.1-1
Will this work in Fedora also to tweak the speed of broadband connection? [URL]
View 2 Replies View RelatedI have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View RelatedI am using Ubuntu 9.10 . And Using BSNL broadband I want to know that how to create new connection using username and password as we do it in windows.I have used pppconfig command but it gives me error that no dialer found d tell me how to create dialer in Ubuntu 9.10
View 9 Replies View RelatedUbuntu 11.04 isn't detecting BSNL 3G USB Datacard. I was using 10.04 earlier & could easily install it then. But now 11.04 isn't detecting the USB datacard, so I'm unable to connect to internet for updates
View 9 Replies View Relatedt "Failed to Connect Firefox can't establish a connection to the server at127.0.0.1:3580." when I try to open a Help File of one of the applications I have.My /etc/hosts file has its entries right:127.0.0.1 hostname.hostdomain hostnameMy firewall is also disabled.
nmap -sT -O localhost
gives me (I have included some):
2401/tcp open cvspserver
[code]....
I'm having problems with my mobile connection. This has been working fine for months, but in the past few days it has connected OK, I've been able to transfer data, but after 30s the connection closes. Setup is Acer AA1 with F12 connecting via bluetooth to Nokia 3110c on O2.
So to try and figure out what's happening I put the bluetooth dongle in my desktop PC, also running F12, made a connection and again it dropped out after 30s. Then I fired up windows on the AA1 and made a connection using the same dongle, this time it held up OK. This leads me to think that something has changed recently in F12 to upset it.
In the last week I have noticed that sometimes my Mobile Broadband connection just goes off without me doing anything! I have credit on the dongle account, so it isn't that. I'm using fedora 14 on an acer aspire one netbook. Dongle is a Huawei E160 on o2 here in the UK Kernel is 2.6.35.11-83.i686.fc14
Sometimes unplugging and replugging the usb dongle works. Othertimes, I have to leave it out for several hours. It does seem to happen daily, though.
I have discovered that my ISP drops down my mobile broadband connection specially at night. It is a very annoying fact because this type of net access is not cheap at all. I am using Fedora 14 newest core. I am able to configure Network Manager to automatically connect, but... this option does not solve the redialing issue.
Is there any way to set up redialing a dropped mobile broadband connection? A perl or python script, may be?
Im able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
View 8 Replies View RelatedI am trying to connect to Internet via 3g Datacard in F15 and Its not getting connected.
View 2 Replies View Relatedi am gonna install fedora and ubuntu.how to connect broadband in fedora and ubuntu..
View 1 Replies View RelatedI am new ubuntu user . I installed - ubuntu desktop v9.10 32bit. I have BSNL (Indian Telephone service) broadband connection. In Windows 7, BSNL broadband connection is working fine.
Now in ububtu I try to establish ADSL connection using following command: "sudo pppoeconf". It open a console based wizard and I'm able to create the connection. But this connection is sustain hardly 4~3 minute, after that it is disconnected. So, Again i have go through the same process again and again.