Ubuntu Multimedia :: Samsung ML-2580N Printer Driver Not Listed In List?
Nov 8, 2010using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Repliesusing Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 RepliesHow can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung
View 1 Replies View RelatedI run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies View RelatedHow can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies View RelatedI have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found
I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.
I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found
I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.
My Postfix email server is hosted with a company called ViUX and their IP address is not listed in any Spamhaus list what so ever from what I can tell. But the residential ISP my mail clients send mail from to the remote Postfix server appear to be on the Spamhaus PBL.
View 3 Replies View RelatedI want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
I bought a new Samsung ML-2851ND. I intend to connect it via the ethernet port is has. Under Ubuntu you cannot just plug and play. To set it up you need to connect it via a USB cable (Ubuntu will have all the needed drivers to operate as soon as you plug it in). Then you can go into the advanced settings for the printer and set up the network settings with the right gateway, subnet and IP address. Once you do this you can http into the address and play with all the other settings. Please note that Samsung have fantastic Linux support and you can download the driver etc here: [URL]
All options are supported (1200dpi, duplex, toner save etc). Kudos to Samsung for making a Linux friendly product. This is the second Samsung I have and I bought it because the first worked so well with Linux. If I need to buy another Samsung are my first preference.
I have a PC for windows connected to my printer. On another PC I just installed & using 10.04 LTS. First of all I am unable to get Ubuntu to find, recognize & install the DCP 395 CN. Linux appears to recognize the MSHOME but does not have my printer listed in the Brother models? This is a wired system consisting of 2 computers through a dsl broadband router. The DCP 395 printer is connected to the Windows PC by USB, if that makes any difference . Would like to connect to the MSHOME or establish a Network that will work.
View 2 Replies View RelatedFriend got a Brother HL-2130 Printer and couldn't add printer using Yast as the drivers are not found by Yast.
I went to Brother Solutions Center : Brother Driver for Linux Distributions and downloaded the drivers provided by Brother.
rpm -ivh *.rpm
and everything works well.
How could we prompt the developers to update openSUSE so that these working drivers can be added into Yast to benefit future users.
Have been successfully using a SCX-4824FN MFP for the past 2 years on Opensuse, trouble-free. Now, it no longer prints and am guessing it may have something to do with a recent Opensuse update? Error message states 'cannot create image', which I understand suggests Ghostscript problem, but Ghostscript is loaded and works fine with other HP printers attached to same PC (other forums also suggest Ghostscript may need installing).
Have downgraded to earlier version of Ghostscript but no joy.
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies View RelatedMy printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.
View 11 Replies View RelatedThe situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
[Code]...
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
I just upgraded from Lucid via update manager. I removed the video driver before upgrading like it was recommended in some posts but now i can not get it back. If I go to System>>Administration>>Additional Drivers nothing is listed. I tried installing the driver from Software Center but i could not enable desktop effects. After it was installed form SF it was displayed in Additional Drivers as installed but NOT in use.
View 1 Replies View RelatedI have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
I bought a new printer from SAMSUNG ML2245 Model. In my system (fedora12), I could not print anything. Then I found that this model samsung ML2245 does not exist in the list box. And I tried to use generic printer, that is also failed. How to install the driver for this model?
View 1 Replies View RelatedThis is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
i just upgraded to ubuntu 10.04 the netbook distro. at the desktop view there is a list of about 10 buttons/menus listed on the left hand side, is there anyway to control what buttons/menus are listed and which icons are listed under each of them? having a netbook i would like to remove and unclutter the desktop view as much as possible but i dont want to remove those apps i still want to be able to open those apps if i want to even if by removing those icons and menus/buttons makes it a pain.
View 1 Replies View RelatedI've recently bought a Samsung R580 laptop. It is now configured as a dual boot system with Ubuntu 10.10 and Windows 7 (64bit). The wireless network functions correctly under Win7, but I have encountered problems with Ubuntu. The native drivers do not function and having identified the driver used by Win7 (net819xp.inf) that works, I have tried to install it using ndisgtk, but get the message "incorrect hardware". I have followed the ndiswrapper howto carefully without being able to get the wireless network going.
View 4 Replies View RelatedI have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies View RelatedThe lpr man page says a destination printer can be specified with the -P flag -P destination[/instance] Prints files to the named printer I have 'added' various printers on local Samba shares using the GUI in Ubuntu/Gnome. How can I get a list of these available printers in the format that the -P flag expects (preferably from a bash shell)?
View 1 Replies View RelatedI like the way 10.04 lts is running on my old PC, except I can't seem to install my HP 895C. This printer worked on previous releases on Ubuntu. The printer is local and cabled to the PC's parallel port. But "Add" under printing doesn't show any parallel printers under local printers. Only shows serial port, other, and network printers. Is this because 10.04 is beta? "Troubleshooting printers" doesn't have a list of printers. Is the lpt1 in PC speak /dev/lp0 in Linux? Should that be the printer URI?
View 9 Replies View RelatedI just installed Karmic. My HDSP is detected (listed in aplay -l and alsamixer) and the firmware is loaded. No errors from dmesg.
Yet no sound... It is not listed in the Sound Preferences GUI.
I am trying to connect a Brother HL-2230 printer over CUPS on an Ubuntu Lucid box. However, when I attempt to add the printer using the web interface (localhost:631/admin) the printer is missing from the page that asks me to choose the driver; however, many other Brother and HL-series printers are listed. My question is, how can I get my printer to appear on the driver list (and yes, I installed the manufacturer's CUPS and LPR drivers)?
View 7 Replies View Related