Ubuntu Networking :: Recognize MSHOME But Doesn't Have Printer Listed In Other Models?
Oct 20, 2010
I have a PC for windows connected to my printer. On another PC I just installed & using 10.04 LTS. First of all I am unable to get Ubuntu to find, recognize & install the DCP 395 CN. Linux appears to recognize the MSHOME but does not have my printer listed in the Brother models? This is a wired system consisting of 2 computers through a dsl broadband router. The DCP 395 printer is connected to the Windows PC by USB, if that makes any difference . Would like to connect to the MSHOME or establish a Network that will work.
View 2 Replies
ADVERTISEMENT
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Feb 6, 2010
Here's what I have working now: one old Dell L933r (Ubuntu 8.04), one old homebuilt (Ubuntu 8.04), one Acer netbook (Ubuntu 9.10), and one HP netbook (Ubuntu 9.10); a Trendnet TEW-631BRP router; the Dell & the homebuilt are wired, and the netbooks are both wireless. The LAN was setup quite awhile ago, when I still had some Windows machines; I have no WIN machines now, and don't plan on any. There are times when I can "see" other machines on the LAN, and there are times when I can't - MSHOME and WORKGROUP are in view. How can I remove the LAN network in place, and start over, creating a LAN that will only be used by Ubuntu machines?
View 1 Replies
View Related
Feb 14, 2010
I am exploring Ubuntu 8.10 on my Asus netbook without yet installing it. While using Ubuntu I cannot get it to recognize any wireless networks.Is this because I am only exploring Ubuntu and it has not yet been installed? The networks are recognized when using the XP operating system.Will Ubuntu recognize the wireless networks once it is installed as the operating system?
View 9 Replies
View Related
May 8, 2010
I had the same problem with normal ubuntu, wubi or even after instaling it in a virtual pc
I've got a wireless router with a WEP security, when I choose my connection and put in the key it just tries for some time and then ask me again for the WEP key. And it goes like this on and on and on, I've tried to connect at some firends gome with the same kind of connection and it doesn't work either.
I think that in an older version I did connect to an unprotected connection but I cannot take out the protection because it is my roomsmate wifi.
View 2 Replies
View Related
Jan 22, 2010
I attempted to download and install Linux XP and the installation appeared to be a success. But after install of course the system reboots. Well after rebooting before opening up the desktop it forces me to set up the domain or something It would not recognize my internet/network connection. My ISP provider doesn't use any type of authentic. My internet connection is automatically configured through my modem. How do I get Linux XP to recognize my internet connection and finish the final process so that I can load into desktop ?? I also had a very similar problem with Linux Ubuntu Studio as well. I installed it and I was able to get into the desktop but still was unable to establish an internet connection.
View 4 Replies
View Related
Apr 4, 2011
I recently installed ubuntu 10 on my Compaq mini 730ej. I installed it using the wubi software. Although it works fine with regular lAN connection, it doesn't recognize any wireless networks - when I click the icon I see a "missing firmware" massage. Now - I am a linux newbie, so be gentle, but I would very much like to solve this problem since.So what can I do?
View 9 Replies
View Related
Dec 23, 2010
Network manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).
View 1 Replies
View Related
Apr 2, 2011
I have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies
View Related
Nov 8, 2010
using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Replies
View Related
Jun 22, 2010
I am an undergraduate student doing some work in Cambridge, MA on NS2. As my project/paper relates to simulating different types of applications like FTP, RTP, and SIP, as they relate to commercial products (VoIP, email, bittorrent, http) and congestion, I was wondering if anyone knows of any simulation models already available besides the example ones released by NS2 and the contributed code found at [URL]. Also, does anyone know of any tcl scripts that simulate specific applications (including the transport layer and Internet layer)? I am using Ubuntu 10.04 LTS and NS2 2.34
View 1 Replies
View Related
Aug 31, 2010
I am networked to a Windows machine. I can see and open files across the network. I can see and add my HP 6000 printer (it is on the Windows machine). On my Ubuntu machine this printer has a check mark by "Enabled" and "shared" but I cannot set it as default (that option is ghosted) and when I try to print a test page it says "unable to connect to CIFS host" I downloaded the HP Linux setup program. That program cannot locate the networked printer at all.
View 7 Replies
View Related
Jun 29, 2010
What are the pros and cons of each? I am just trying to make some models of different types of users and be able to scale.
View 2 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Oct 19, 2010
consider reading this [URL]..Ubuntu-Tweak doesn't have the option Startup which includes Session Manager Session Control and few other options are not there. I am running the latest version available to download. I remember having all those menus in lucid. for a better difference comparison see the menus in the ubuntu tweak homepage [URL]..how can I get these option back. here is the error I get when I run Ubuntu Tweak from terminal
Quote:
ERROR:dbus.proxies:Introspect error on :1.142:/com/ubuntu_tweak/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.141" (uid=1000 pid=16550 comm="/usr/bin/python) interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.142" (uid=0 pid=16560 comm="/usr/bin/python))
Update: I installed the same deb on another computer and that has nothing wrong. all the menus are listed fine.
View 1 Replies
View Related
Mar 24, 2010
I have a parallel port printer connected using usb->parallel adapter. Sometimes the printer prints sometimes it doesn't.
A job will go the print queue and then sit there for ages. Sometimes if I unplug and then replug the usb->parallel cable the printer will print other times it will print half the document then freeze until the cable was unplugged and replugged again.
The printer never shows up in the list using lsusb (only my usb mouse and scanner do).
The printer is an hp deskjet 690c and worked fine under WinXP through a normal parallel cable. The one thing I haven't tested (but will test tomorrow) is the usb->parallel cable in XP.
View 1 Replies
View Related
Jul 14, 2011
Total newbie here. Just installed 11.04 alongside WinXP on an older eMachine. The pc has built in DVD/CD burner/player and CD player and Canon (i860) printer on USB. Frankly I don't know exactly what I've done so far, but my wireless connection is great, screen, keyboard, mouse are great. FireFox runs super. I am now on information overload after reading any number of posts. I am looking for real simple and direct So how do I get Ubuntu to now 'see' the printer and dvd and cd arrangement?
View 4 Replies
View Related
May 22, 2010
I'm trying to install ubuntu 10.04 on an old computer, but the installer doesn't have any listed partitions and I can't go any further. The hard drive I'm trying to install it to was just formated in Windows 7, it's a clean hard drive. Uh, how am I supposed to install it?
View 1 Replies
View Related
Feb 21, 2011
I originally installed Ubuntu Linux. Set up the printer just by going to printing and add printer,everything worked fine. After a few updates, I cannot get Linux to recognize any printer on Windows 7, (where the printers are all set up).
View 14 Replies
View Related
Jan 30, 2011
I have a Brother mfc-8890dw that is attached to my local area network.I can ping the static ip address of the printer and receive a reply. I can print from all applications.I cannot scan. I did modify the rules files but that only appears pertinent for usb attached devices. What do I need to do to get XSane to recognize my Ethernet attached scanner/printer?
View 2 Replies
View Related
May 26, 2015
I'm having a problem with my touchpad being recognized.It works fine in Win7, but when I load Debian the touchpad doesn't work and isn't listed in xinput.When I first installed Debian, the touchpad worked for a minute, then the computer went to sleep. I woke it up and the touchpad wouldn't work. Since then, the touchpad does not work.
View 7 Replies
View Related
Jun 22, 2010
I have the latest ubuntu and it seems to be all fine except I am trying to connect to my mshome XP network without any luck. I have installed Samba and in Network places it shows Workgroup and MSHome. Click on MSHome and I see my XP boxes.
Click on an XP box and I get.. You can stop this op etc' then I get the 'Unable to mount - Failed to retrieve share list from server' error. I have been on this for 3 days now and just about over it I'm sorry to say. The forums are thick with threads like mine without any definitive answers. I had a distro called MEPIS on before Ubuntu and with these same machines I was able to connect to the network without any problems so I am baffled why I can't now.
View 3 Replies
View Related
Jul 26, 2010
i just upgraded to ubuntu 10.04 the netbook distro. at the desktop view there is a list of about 10 buttons/menus listed on the left hand side, is there anyway to control what buttons/menus are listed and which icons are listed under each of them? having a netbook i would like to remove and unclutter the desktop view as much as possible but i dont want to remove those apps i still want to be able to open those apps if i want to even if by removing those icons and menus/buttons makes it a pain.
View 1 Replies
View Related
Mar 24, 2011
In 11.3 I used an Epson Stylus Color 600 which worked well enough.
Now I'm quite disappointed that this so called 'best version ever' (11.4) refuses to recognize this printer.
The modules parport, parport_pc, and lp are all loaded. My printer is on and connected, but OpenSuse claims that there is nothing.
View 9 Replies
View Related
Sep 8, 2010
I have an acer aspireone aod250, i putted an external cdrom and downloaded the ubuntu, tried to install it but it didn't recognize the hdd... i though it was the cd, i downloaded ubuntu netbook edition, it did the same. i thought maybe i could try another operative, i downloaded linux mint 9, did the same thing. then ordered a cd from ubuntu.com, got in today, and it doesn't recognize my hdd. btw, the hdd is a seagate momentus 5400.6 with 160gb. i already ran ubuntu with the cd rom and starts the instalation, but when it arrives to the partitioning part of the instalation, it doesn't detect my hdd. but the bios in the pc detects it.
View 9 Replies
View Related
Jan 13, 2011
I'm new to ubuntu. My kingston 4Gb pen drive doesn't recognize from ubuntu 10.04.
View 8 Replies
View Related
Feb 8, 2010
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
View 7 Replies
View Related
Feb 9, 2010
I have a dual boot installation of ubuntu and windows vista. After upgrading to Karmic I haven't been able to access to the CD drive. How can I use it? The following error message is displayed when I click on Places --> cdrom0:"mount: special device /dev/scd0 does not exist"I am about reinstalling the whole OS, but for that I need the CD
View 3 Replies
View Related
Feb 20, 2010
No media player recognizes my Philips MP3 Player as such, I've put all my hopes into Rhythmbox, it seems to be the most likely one to work. Anyway, I have created the empty .is_audio_player file but still the player does not show up in RB. I can access the player just fine through Nautilus, and syncing it actually worked for a while, but now for some reason it has stopped.
View 9 Replies
View Related
May 19, 2010
My computer doesn't recognize when I put in my headphones.
How can I fix this.
View 1 Replies
View Related
