Fedora :: Install The Printer With CUPS And Not With Samsung Unified Install Software?
Feb 19, 2011
I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.
[Code]...
View 5 Replies
ADVERTISEMENT
Jan 19, 2010
How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
View 3 Replies
View Related
Jun 3, 2011
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies
View Related
May 14, 2011
Code:
sudo /etc/init.d/cups restart
results in
[code]....
View 1 Replies
View Related
May 23, 2011
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies
View Related
Aug 31, 2010
i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung
View 1 Replies
View Related
Aug 16, 2011
I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found
I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.
I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found
I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.
View 9 Replies
View Related
Dec 24, 2010
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
View 4 Replies
View Related
Apr 27, 2010
I have PDF printer on laptop, but not on work machine. Both using 11.2.How to install it on work machine (desktop)?
View 2 Replies
View Related
May 16, 2010
After struggling with a bad LP cable I have finally proven that the cable, printer and port all work. I booted in to another OS and was able to finally print. Now, I'm trying to get server 10.4 to recognize the printer and then I want to configure CUPs so I can run this machine as a headless print server, among other things.
Apache is running as I managed to get nagios to run and I can pull it up from another PC via a browser.
sshd is running as I'm logged in from another PC via ssh.
Problem number 1 is how do I install a driver for an NEC Superscript 870 printer? As it is lpstat returnes with :
karl@zeus:/etc/cups$ lpstat -t
scheduler is not running
no system default destination
Once I am able to print then I need to print to the server from other hosts on the network.
View 9 Replies
View Related
Jun 22, 2011
I just attemted the install for the Radeon unified drivers. Im running Ubuntu 10.04 with a X1200 series graphics card. 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f] The setup seemed to go fine and I restarted as it suggested. but now when I attempt to open the new catalist control center application it gives me a message about not detecting any Radeon components or I need to configure them. Sadly this message isnt copy/pasteable.
View 4 Replies
View Related
Jun 29, 2011
I want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
View 1 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
May 12, 2009
I'm working on CUPS server here now, I am new to the whole Fedora area, I'm starting to like it, tackling one service after the other. I have cups, which I don't recall installing but was there guess its a default. So I added a printer on my server, that was on a 10.0.1.1 block, added it as lpd://10.0.1.1/lab3printer. Ok that worked and printed from my server, but my problem is when other machines try to add the printer. I continue getting this problem
Alberto "recoverable: Network host '10.0.11.25' is busy; will retry in 30 seconds..."
On the computer it was added as printer lpd://10.0.11.25/alberto because my server has that IP and printer well named it alberto. I followed what this said with the xined.d [URL].
View 3 Replies
View Related
Aug 10, 2011
i have a server built out using a minimal f15 installation. when i connect my samsung galaxy s2 via usb i see the following in the syslog :
Aug 10 09:31:43 server kernel: [593577.329268] usb 2-1.2: new high speed USB device number 17 using ehci_hcd
Aug 10 09:31:43 server kernel: [593577.405527] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=685e
Aug 10 09:31:43 server kernel: [593577.406045] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code].....
and can access the storage. when booted into the minimal installation, other usb devices such as usb sticks can be accessed and mounted successfully. what i'm missing from my minimal installation that is preventing the samsung storage from being accessible ?
View 1 Replies
View Related
Jun 20, 2009
I have a Fedora 11 box with an HP Laserjet 1000 (connected by USB) a Windows XP machineBoth are on the same network. I am desperately trying to share the printer to the Windows XP box using IPP. The Windows XP machine recognizes the printer queue, configures correctly and then ... nothing. It simply does not print ! Printer sharing worked perfectly in Fedora 10, with CUPS 1.3, but something seems to have broken.I used the guide available at this adress and tried all mentionned possibilites
Code:
MaxLogSize 0
LogLevel info
[code]...
View 6 Replies
View Related
Apr 28, 2011
I have taken a break from using Fedora, but since getting my netbook Ive decided to dual boot with Windows 7 Started (warranty purposes) and Fedora 14 with Fedora as the default boot OS. Now Ive got my home network setup as follows:
Gaming laptop, Windows 7 Pro x64, external powered USB hub with 1.5TB HD with shared folders through windows share permissions and the HP Deskjet F2430 printer
Netbook 1, my wifes netbook, Windows 7 Starter, has 100% access to the windows shares and the printer.
Netbook 2, my netbook, Fedora 14 has windows shared folder access but no printer access. In Windows 7 Starter has access to windows shared folders and printer access.
All of them are wirelessly networked through my Linksys WRTG54GS thats flashed with DD-WRT Mega firmware. The only laptop that has a hardwired connection to the printer and HD is my gaming laptop. how to go about allowing this? My printer doesnt show up in the CUPS wizard.
View 14 Replies
View Related
Oct 10, 2010
I recently got a Samsung ML-1660 printer and while it worked fine with the unified linux driver provided by Samsung, I didn't really like how that driver did its business with regards to installing old static libraries and other stuff that I don't need and most certainly don't want going stale and causing problems down the track.
1) Download the Samsung unified printer driver from their website (UnifiedLinuxDriver_*.tar.gz)
2) Extract /cdroot/Linux/noarch/at_opt/share/ppd/ML-1660spl.ppd to a temporary directory.
3) For 32 bit: extract /cdroot/Linux/i386/at_root/usr/lib/cups/filter/rastertosamsung* to a tmp dir
4) For 64 bit: extract /cdroot/Linux/x86_64/at_root/usr/lib64/cups/filter/rastertosamsung* to a tmp dir
[code]...
View 9 Replies
View Related
Jun 17, 2009
I'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
View 4 Replies
View Related
Mar 18, 2010
I have a FC12 machine installed with CUPS and a CUPS-PDF printer. Printer are shared and works fine with this URL:
[URL]
I have both client machine Windows XP and Windows 7. Both has setup the above printer and print fine without any problem. I can get the PDF file from windows test print. The only problem is I face is wait for around 20 seconds for printer dialog prompt out when I press print button in Windows 7. However, my windows XP never t have this problem. The printer dialog prompt out immediately when I press print button.
View 2 Replies
View Related
May 2, 2009
What is the command to install CUPS and Samba, like yum install. I don't want to be installing wrong things and then end up with dependency problems, and after that what do i need to configure to have CUPS print from the localhost, and so that other computers from the networks also be able to print from the server, that is i'm workin on a server. As for samba i just need the installation command, then i want to figure the rest out.
View 1 Replies
View Related
Sep 18, 2010
we are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
View 2 Replies
View Related
Mar 16, 2011
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies
View Related
Jun 1, 2010
I am having difficulty getting my printer set up after a fresh install of F13KDE. I started a thread similar to what I am now doing, awhile ago. It was met with success. The thread is posted here.
[URL]
The difference in the way I am doing it this time and the way the thread talks about is that the latter is a wireless config, the former is USB. I have done pretty much all that I can do in the terminal to get my printer recognized, but that is where hp-setup hangs--it doesn't recognize my printer. What do I have to do to get my printer recognized? It is an HP c6380.
View 2 Replies
View Related
Jul 10, 2010
hplip-3.10.5.run is the name of the file.
View 6 Replies
View Related
May 14, 2010
My Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies
View Related
Jun 14, 2010
I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies
View Related
May 1, 2011
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
View 3 Replies
View Related
Aug 31, 2010
I've never installed a network printer before and have no clue. I'm running Fedora 12, the printer is an ancient HP 2100TN. I'm linked directly to wall jacks in my building, have no clue about the router and have no access to it. I have no idea how to get Fedora to find this printer.
View 14 Replies
View Related
Jan 18, 2010
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
View 14 Replies
View Related
