The lpr man page says a destination printer can be specified with the -P flag -P destination[/instance] Prints files to the named printer I have 'added' various printers on local Samba shares using the GUI in Ubuntu/Gnome. How can I get a list of these available printers in the format that the -P flag expects (preferably from a bash shell)?
View 1 RepliesHow would I list 4 users ID numbered 10, 11, 12 and 13 from my users list and output them to a file busers where their names are numbered by ascending order? How would I accomplish that on a one line command?
View 4 Replies View RelatedI want to get a list of all available Network-Device Names on my Linux server. I figured that
netstat -a
would do the job, however netstat produces quite much output:
eth0 Link encap:Ethernet Hardware Adresse 08:00:27:fc:5c:98
inet Adresse:192.168.2.222 Bcast:192.168.2.255 Maske:255.255.255.0
inet6-Adresse: fe80::a00:27ff:fefc:5c98/64 Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
[Code]....
I assume that this can be done by a combination of "cat", "sed" and "grep", but I have simply no clue of how to strip the uneccessary information.
no acceptable c-compilier found when installing vlc offline. mozzilla can't connect to internet but I can ping my server
View 3 Replies View RelatedI am planning to create my first Hacked/Tweaked/Customized LiveDistro...not planning to release it for now...( would not have time to maintain it anyway...) Thing is... I will use some binaries/libs compiled with Commercial compilers from Intel... this is a non OSS suite of development tools...
View 11 Replies View RelatedI just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I'm looking for something like:
Code: for x in *.mkv; do rename "$x" "${line_from_filenames.txt}.mkv"; done; ls -1 ~/kids/movies/*.mkv
00.20080903fckdlowp.mkv
01.20080911fckdl2fd.mkv
02.20080925fckdlgrs.mkv
03.20081026fckdlbh7.mkv
04.20081206fckdli90.mkv
05.20090214fckdmkni.mkv
[Code]....
I am running a server which is hosting a site where members can upload videoclips. I noticed that upon upload a thumbnail is not created for the videoclip. I found out that ffmpeg needed to be properly installed and in my case ffmpeg-php as the site runs on php. So far so good. I followed the instructions found somewhere to install ffmpeg-php but stall at the command: dot slash configure && make The error I get is:
checking for egrep... grep -E
checking for a sed that does not truncate output... slash slash bin slash sed
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
I presume it's because gcc is missing. how I can start tackling the problem and ultimately get gcc running so I can install the ffmpeg? I am really sorry I was hoping to elaborate a bit more but I get an error: You are only allowed to post URLs to other sites after you have made 15 posts or more. so I guess I need to wait and describe it differently.
I like the way 10.04 lts is running on my old PC, except I can't seem to install my HP 895C. This printer worked on previous releases on Ubuntu. The printer is local and cabled to the PC's parallel port. But "Add" under printing doesn't show any parallel printers under local printers. Only shows serial port, other, and network printers. Is this because 10.04 is beta? "Troubleshooting printers" doesn't have a list of printers. Is the lpt1 in PC speak /dev/lp0 in Linux? Should that be the printer URI?
View 9 Replies View RelatedWhen I run "ls -al somedir*" (I use the "ll" shortcut, actually), Linux not only list files that match, but also the contents of directories whose name also happens to match.Is there a way to limit "ls" so that it will only show names (files and directories) and ignore the contents of the directories?
View 2 Replies View RelatedI am trying to connect a Brother HL-2230 printer over CUPS on an Ubuntu Lucid box. However, when I attempt to add the printer using the web interface (localhost:631/admin) the printer is missing from the page that asks me to choose the driver; however, many other Brother and HL-series printers are listed. My question is, how can I get my printer to appear on the driver list (and yes, I installed the manufacturer's CUPS and LPR drivers)?
View 7 Replies View Relatedusing Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Replies View RelatedMy Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies View RelatedHow can I convert a file with a lot hex numbers into the decimal?
Example: file1
0x59999
0x5acdc
0xffeff
I want to start $ cat file1 | util | cat >file2 and get file2 with smth like
[Code]...
list the 'chkconfig --list' in alphabetical order
View 3 Replies View Relatedone command to list the list of folders/ within the folder.
View 4 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedWhile installing berkeley db on linux i m getting the following error:
"configure: error: no acceptable C compiler found in $PATH"
I m installing this for postfix.
Error: no acceptable C compiler found in $PATH.
I have an ubuntu 10.10
I recently installed Ubuntu 10.10 (64bit) on my laptop (Toshiba satellite L300 64bit) and have since had horrible issues with the machine overheating. When the system is idle, the temp is decent, a bit warm maybe. If I start browsing the Internet, temp goes way up. I cant watch more than 1 and a half minutes of a ..... video without the system's temp exceeding acceptable limits, and shutting itself down. I have tried both the 32 bit and 64bit versions of ubuntu 10.10, as well as a 64bit version of 10.4. same overheating issues with all of these.
I am 99.999999 percent sure that it is an issue with my laptop's cooling fan, as although it appears to be spinning, it is so quiet that I would think it was off completely if I were to not tilt the laptop back and check to see if it is spinning. Also, the speed of the fan does not change, regardless of the machines temp. Even before it shuts off because of extremely high temps, the fan is still running at that same speed. I am currently downloading fedora 14, a different linux distro, to see if there is any difference.
I'm getting random system hangs and display issues when using my computer with my nVidia graphics card. On a lark, i checked /proc/interrupts and noticed that the nvidia device is sharing an interrupt with one of my USB boards, as well as my integrated sound card. i managed to move my sound card by editing my alsa-base and adding:
Code: options snd-hda-intel enable_msi=1 This helps mostly, but i'm still getting intermittant issues. is there any way to shift the interrupt of my gfx card (or usb controller) to avoid this potential conflict? i know the devices should be able to co-exist, but i've seen several people having issues when an nVidia card shares interrupts.
[Code]...
for some reason I don't know how to install *.tar.gz files, I ommitted some of my files listed in the code after the ls command for simplicity
[Code]....
I'm trying to configure Apache, however I have some problems..
linux-top:~/appli/httpd-2.2.14 # ./configure --prefix=/root/appli/
checking for chosen layout... Apache
checking for working mkdir -p... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Configuring Apache Portable Runtime library ...
checking for APR... reconfig
configuring package in srclib/apr now
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Configuring APR library
Platform: i686-pc-linux-gnu
checking for working mkdir -p... yes
APR Version: 1.3.9
checking for chosen layout... apr
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/root/appli/httpd-2.2.14/srclib/apr':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
configure failed for srclib/apr
i'm a new on linux system and i have a problem with SUSE 9.1. I google for yast repositories to install "gcc" but i only see for release 10+. So i think 9.1 version it old version. The thing is that i can't upgrade the SO because it's a "sever" for some applications, and my problem is that i need to install Nagios, but when i type the ./configure command its says:
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
So I decided to install packages with yast, but i can't find any active repository. I very new on this, and i don't know if i'm doing right the things. Also i don't have too much practice on english.
This is the info of the SO
* uname -a:
Linux noc 2.6.5-7.111-default #1 Wed Oct 13 15:45:13 UTC 2004 i686 i686 i386 GNU/Linux
* cat /etc/SuSE-release
SuSE Linux 9.1 (i586)
VERSION = 9.1
I have Centos 5.4 installed on my dedicated blade server.. (I thought I had some other OS - ignor SUSE 10.1 opps) I'm trying to install ImageMagick - I didn't find it on my server i did do what they said but not there..
1. I downloaded the file to the ROOT (i hope that the right Place)
2. cd ImageMagick-6.6.0-5
3. ./configure
4. This ERROR CAME BACK
[Code]....
I am trying to install Apache on my remote server. I've downloaded the latest Apache Http Server and when I configure it I get this error: configure error: No acceptable C compiler found in $PATH. So I download and extract the latest GCC Compiler and when I try to install that I get the same error:
configure error: No acceptable C compiler found in $PATH I am really stumped... Can anyone just offer ideas. My server is running CentOS 5.4 x64 and I'm remotely trying to download and install a running LAMP setup for Joomla. I'm using a shell to communicate with a cloud server type.
I am using Red Hat Enterprise 5 and have downloaded GCC 4.4.5 and trying to install or configuring the same, but getting some problem.
Code: # mkdir objdir
# cd objdir
# srcdir/configure Output of command
Code: checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
[Code]...
configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. this to install GCC package.
I have been trying to install MPICH2 on a server node for a cluster I am building running RedHat 5.5, and when running the "configure" shell file, it gives me the error message: "configure:4533: error: no acceptable C compiler found in $PATH." I tried to install the gcc c-compiler from the installation disk, but it had the dependency "libgomp.so.1()", which I cannot find on the disk nor on any web site. Where can I find this dependency or get a different c-compiler?
View 5 Replies View RelatedI have had problems trying to use ./configure when compiling fvwm95. I get a error that says this
Code:
checking for cc... no
configure: error: no acceptable cc found in $PATH
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?