OpenSUSE Hardware :: Samsung Scx4200 Printer Install?

May 23, 2011

I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.

View 1 Replies


ADVERTISEMENT

Fedora :: Install The Printer With CUPS And Not With Samsung Unified Install Software?

Feb 19, 2011

I have migrated from Debian to Fedora 14 (2.6.35.11-83.fc14.x86_64). Problem is that I can't get my networked printer to work (which it did with Debian). The printer is Samsung ML-3561ND and I got all he drivers & PPD from Samsung support. I prefer to install the printer with CUPS and not with Samsung Unified Linux install software. I have to send my documents to a user's Windows workstation and print from there I have googled a lot but have not found any solution.

[Code]...

View 5 Replies View Related

OpenSUSE Hardware :: SCX-4824FN Samsung Printer Error

Dec 8, 2010

Have been successfully using a SCX-4824FN MFP for the past 2 years on Opensuse, trouble-free. Now, it no longer prints and am guessing it may have something to do with a recent Opensuse update? Error message states 'cannot create image', which I understand suggests Ghostscript problem, but Ghostscript is loaded and works fine with other HP printers attached to same PC (other forums also suggest Ghostscript may need installing).

Have downgraded to earlier version of Ghostscript but no joy.

View 6 Replies View Related

Fedora :: Install Samsung ML-1710 Printer Driver?

Jan 19, 2010

How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.

It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.

View 3 Replies View Related

Ubuntu Multimedia :: Install New Printer Samsung ML 1665?

Aug 31, 2010

i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung

View 1 Replies View Related

Ubuntu :: Unable To Install Samsung Printer ML1860

Aug 16, 2011

I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found

I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.

I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found

I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.

View 9 Replies View Related

OpenSUSE Hardware :: Samsung CLX 3170 FN -printer Doesnt' Work?

Aug 4, 2010

The situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.

The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE

[Code]...

View 6 Replies View Related

OpenSUSE Hardware :: After Upgrade To 11.3 Fails To Print With Samsung Ml 1640 Printer?

Jul 27, 2010

yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.

output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided

View 3 Replies View Related

General :: Doesnt Recognise My Floppy Drive - Cant Install My Printer A Samsung ML4500 Laser

Dec 24, 2010

I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?

1.AUTORUN will not run

2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'

3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.

4. Inside the linux folder are three file's, copied and shown below

The first file is entitled :

View 4 Replies View Related

Hardware :: How To Use Samsung Printer In CentOS

Mar 16, 2011

How can use my printer in my linux? My printer is samsung clp-510.

View 3 Replies View Related

Fedora :: Add A Samsung ML-1911 Printer To Desktop?

Jun 29, 2011

I want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.

[Code]...

View 1 Replies View Related

Ubuntu :: Setting Up A Samsung ML-02851ND Printer?

Jun 14, 2010

I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.

View 1 Replies View Related

Debian :: Setup Printer Samsung Ml-1740?

May 1, 2011

As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".

View 3 Replies View Related

Ubuntu Networking :: Sharing Samsung Printer Over Samba?

Jul 27, 2011

I have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.

The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.

My setup is the following:

- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients

[code]....

View 1 Replies View Related

Slackware :: 13.1 - Samsung Printer (ML-2251NP) Not Working Correctly

May 26, 2010

My printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.

View 11 Replies View Related

Ubuntu Networking :: Installing Samsung 2851ND Printer On Network

Feb 11, 2010

I bought a new Samsung ML-2851ND. I intend to connect it via the ethernet port is has. Under Ubuntu you cannot just plug and play. To set it up you need to connect it via a USB cable (Ubuntu will have all the needed drivers to operate as soon as you plug it in). Then you can go into the advanced settings for the printer and set up the network settings with the right gateway, subnet and IP address. Once you do this you can http into the address and play with all the other settings. Please note that Samsung have fantastic Linux support and you can download the driver etc here: [URL]

All options are supported (1200dpi, duplex, toner save etc). Kudos to Samsung for making a Linux friendly product. This is the second Samsung I have and I bought it because the first worked so well with Linux. If I need to buy another Samsung are my first preference.

View 1 Replies View Related

OpenSUSE Install :: Live CD - Can't Print Via Samsung ML-1740?

Jan 5, 2010

I'm on a T42 laptop with a Samsung ML-1740 attached on my USB port. I installed the printer with the tool and everything seemingly went okay. Won't print, tho. I read somewhere on fedora's pages (prob the forum) that someone had a similar prob and it was a matter of loading foomatic, whatever that was, then retrying the load. It worked for them. Anyone aware of this?? Or is this a simple fix? I used the recommended driver for ML-1740 listed in the GUI.I have to reboot, I'll try to get a printout from troubleshooting.

View 4 Replies View Related

Ubuntu Multimedia :: Samsung ML-2580N Printer Driver Not Listed In List?

Nov 8, 2010

using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.

View 1 Replies View Related

OpenSUSE Install :: 11.3 Running On Samsung Q1EX - Working Configuration - Failed To Get Textmode Console

Sep 4, 2010

I needed to load Linux on a Samsung Q1Ex for a project I'm contracting on, and could not for the life of me get anything to run. Turns out that the video card is a chrome relative, and for some reason, almost every distro out there (I usually use debian for this sort of project - ie, no money, but use SLES at my day job) failed to even get to textmode console. Trying several distros, I finally put it out there and used OpenSuse and voila!, vga was working. After that, I got X running, and many hours later had the mouse working. The key to this device is Windows. I ended up parsing through the registry looking for "touch" and found that the software in use on Windows is eGalaxTouch. A quick google brought up their site where I found several Linux drivers. I used the beta mode drivers to get the mouse working. Here is a more detailed breakdown.

Use OpenSuse 11.3 (I used the full blown disc - its is the only distro I could get to boot correctly as the others all used OpenChrome, while OpenSuse seems to use fbdev - note here that installing the unichrome drivers will actually break X and cause you to have to reboot to get away from the mess on the screen). Use eGalaxyTouch drivers. The pdf's included in the download have step-by-step instructions but the big pieces are the setup.sh script and the serio_raw steps (note if you perform a 'hwinfo --bios | more' you can figure out which /dev/input/event* you're using - for me it was event1 and serio4). Note also to choose PS/2 when executing the setup.sh script provided in their download. eGalax_eMPIA Technology Inc. TouchKit Linux Driver Here is my xorg.conf now:

Section "ServerLayout"
InputDevice "EETI" "SendCoreEvents"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....

On the video, just stay with the fbdev and you should be good. So far, I've had KDE, Gnome, TWM all running; and now have my EFL apps running! Woohoo! Next piece of the puzzle is to verify sound, but on the face of it, looks like the system recognized it off the bat. And of course one other note. 11.3 is going to make me a convert!

View 1 Replies View Related

OpenSUSE Network :: Possible To Install A Netwerk Printer, While Not Connected To The Netwerk Where The Printer Is?

Jan 7, 2010

is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico

View 4 Replies View Related

OpenSUSE Hardware :: Install Lexmark Z517 Printer On 11.1?

Oct 31, 2009

I'm a new opensuse user, and I've got a lexmark z517 colour printer, that works correctly on my ubuntu, but it was a tough job to make it work on opensuse, because of the rarely support of this printer, but I found some howto-s, and with a little correction, I managed to install the driver, I share my solution to help people with this printer. This is it: How to install Lexmark Z517 printer on openSuse 11.1

The driver for lexmark z600 should be good for z517 also, so I searched for driver for z600. I found a little manual at The Lexmark Z605 printer and SuSE 9.3, a little HOWTO, but it didn't work with my system. So we need a little makeup. Before you enter the method, you should install libstdc++ from the package manager, because the printer driver will miss it.

[Code]...

View 9 Replies View Related

OpenSUSE Hardware :: Install LPB 2900 Printer In SuSE 11.2?

Feb 16, 2010

I am trying to install a LPB 2900 printer to my system. I use SuSE 11.2. I've downloaded driver pack (Driver.tar.gz) from driver collectoin.com. The problem is that I can't unpack this driver pack.And I don't really know how to install this driver.I've tried from printer configuration from yast2.The problem is that LPB 2900 driver is not known by the package browser(add driver).

View 6 Replies View Related

OpenSUSE Hardware :: Install Printer - Lexmark X2670 All In One?

Aug 9, 2011

I am trying to install printer - Lexmark X2670 All in One. On Lexmark download site i found this[URL]..There are three links - I dont know wich of them is for my system?(Suse 11.4)

View 3 Replies View Related

OpenSUSE Install :: Installing HP Photosmart B110 Printer On 11.0?

Nov 22, 2010

I am trying to install my new HP Photosmart b110 All-in-one printer on my notebook, but it seems to be very hard...I have Opensuse 11.0 x86-64. I tried to install hplip from the web, but neither the 3.10.9 nor the 3.10.6 version works. Automatic installation is a disaster: the driver tries to resolve dependencies, which are impossible to resolve, probably because - I realized - support to opensuse 11.0 was stopped. So I tried with custom installation, avoiding all those features leading to strage dependencies, but also in this case I get an error: "make failed with exit status 2", or something similar...

should I necessarily switch to 11.2 or 11.3 version? in this case, is it possible to upgrade directly from 11.0 to 11.3 without loosing data..?

View 1 Replies View Related

OpenSUSE Hardware :: Unable To Add USB Printer Via The YaST2 Printer Configuration Setup Tool In 11.3

Aug 26, 2010

I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.

[Code]...

This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.

View 7 Replies View Related

General :: Install A Printer On The Parallel Port? The Printer Is A Epson LX-2170?

May 14, 2010

My Operating system is Ubuntu 10-4 that I have just installed.

View 6 Replies View Related

OpenSUSE :: CUPS PDF Printer - How To Install It On Work Machine (desktop)

Apr 27, 2010

I have PDF printer on laptop, but not on work machine. Both using 11.2.How to install it on work machine (desktop)?

View 2 Replies View Related

OpenSUSE Hardware :: Can't Install Pipslite-1.4.0-5 For An Epson Workforce 610 Printer?

Jul 25, 2010

I downloaded the .rpm file for pipslite-1.4.0-5 and tried to install it using YaST, but it needs "libgdk-1.2.so.0". I was given the error "nothing provides libgdk-1.2.so.0 needed by pipslite-1.4.0-5.i386. I am currently running 32-bit OpenSUSE 11.3. Can anybody help me with installing pipslite? I googled libgdk and I notice that it's in gtk+, but I don't know how to install that either.

View 7 Replies View Related

OpenSUSE Install :: Canon ImageCLASS MF4150 Printer Driver

Jan 23, 2010

I need to install the driver and I downloaded the Canon install package. The instructions read:

# rpm -ivh [file name of common module for CUPS drivers]

This rpm package construct was used in the Fedora distro.

Does it also work in openSUSE?

The only other construct given was for a deb package.

I looked in YasT for the driver but it was not there.

View 9 Replies View Related

OpenSUSE Install :: Bug On The Yast -> Hardware -> Printer Installation Utilty?

Mar 13, 2011

My Epson Stylus D88 Plus parallel connection is not detected in the Yast -> Hardware -> Printer installation utility, while the driver is supported in the OpenSUSE 11.4 stable version ? Ok when this printer is connected to USB port.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved