OpenSUSE Hardware :: After Upgrade To 11.3 Fails To Print With Samsung Ml 1640 Printer?
Jul 27, 2010
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
View 3 Replies
ADVERTISEMENT
Nov 29, 2008
After the kernel updated to version; 2.6.25.18-0.2 and I edited my grub boot file, and the printer driver shows as; Local Raw Printer, it fails to print. With SUSE 11.0, KDE 3.5.9, on a 2006 Gateway AMD Athlon desktop computer, using a Canon PIXMA MP500 multi-function inkjet printer connected USB, when I attempt to print a page, it shows as if it is functioning fine, but nothing happens, and no error messages.
View 2 Replies
View Related
Jan 5, 2010
I'm on a T42 laptop with a Samsung ML-1740 attached on my USB port. I installed the printer with the tool and everything seemingly went okay. Won't print, tho. I read somewhere on fedora's pages (prob the forum) that someone had a similar prob and it was a matter of loading foomatic, whatever that was, then retrying the load. It worked for them. Anyone aware of this?? Or is this a simple fix? I used the recommended driver for ML-1740 listed in the GUI.I have to reboot, I'll try to get a printout from troubleshooting.
View 4 Replies
View Related
Dec 8, 2010
Have been successfully using a SCX-4824FN MFP for the past 2 years on Opensuse, trouble-free. Now, it no longer prints and am guessing it may have something to do with a recent Opensuse update? Error message states 'cannot create image', which I understand suggests Ghostscript problem, but Ghostscript is loaded and works fine with other HP printers attached to same PC (other forums also suggest Ghostscript may need installing).
Have downgraded to earlier version of Ghostscript but no joy.
View 6 Replies
View Related
May 23, 2011
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies
View Related
Aug 4, 2010
The situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
[Code]...
View 6 Replies
View Related
May 28, 2011
I have no problems accessing files, with the windows shares. The only problem is getting my printer to mount. Here is the trouble shoot log, I didn't fine the problem till, I tried to print something.
Quote:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dests_available': [], 'cups_queue_listed': False}
[Code]....
View 2 Replies
View Related
Apr 10, 2011
Using openSUSE 11.4 and winXP pro sp3I am a complete noob to linux.I went into YAST2 and added a printer--none were found. I used the connection wizard and selected Print Via Print Server Machine>>Windows or Samba.i entered the winxp info
server: daddy
Printer Share Name: HP4200
Workgroup: MSHOME
[code]...
View 9 Replies
View Related
Sep 17, 2010
I've been banging my head for two days now trying to get my HP Laserjet 1020 to work. I've gotten the drivers working on the box itself (Opensuse 11.3 x64), but I couldn't get it to print from my laptop (Ubuntu Lucid). Ideally, I'd like to end up with a functional printer which can be used either from the desktop machine (Opensuse) or from the laptop (Ubuntu) through NFS.
After so many attempts at fixing it, I've not made it such that I can't print at all, from either system. I'm considering re-installing Opensuse (or just going back to Kubuntu, which recognizes the printer without a hitch). But before I do so, I figured I'd ask here.
Here are my issues, and attempts at solution:
1) I tried adding the printer both through CUPS, through YAST and through hp-setup, using the hpijs driver. Each time the printer is recognized, but a test page won't print.
2) I tried building the foo2zjs driver, as outlined here: HowTo Install a HP LaserJet 1020 printer in Suse 10.x, 11.x It came up with dependency problems repeatedly on the last step (sudo make install-hotplug) . I gave up when it told me that it was conflicting with an installed package (system-config-printer-udev) which was not installed.
3) Perhaps related problem: on the CUPS web interface, I get a "forbidden" message when I try to change the options on the CUPS server to allow remote access.
Note that:
a) I've already added myself to the lp group.
b) I changed the permissions (+rx) on the /dev/lp0 to allow myself access
c) I'm able to get to the CUPS page on the client machine, so the port 631 (I think) must be open. I say "I think," because there's no option to allow CUPS in YAST firewall settings, for some reason.
I've been following guides here and there, but I'm afraid that I've borked my cupsd.conf file through all the edits. Here it is:
Code:
View 7 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Oct 23, 2010
I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
View 1 Replies
View Related
Jul 9, 2010
I have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:
Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]
I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:
[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...
I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.
View 2 Replies
View Related
Nov 26, 2010
I've got 11.3 Gnome on my lenovo desktop and I'm trying to connect an Epson Workforce 610 via a wired network. I installed the driver from AVASYS and Linux Standard Base in accordance with instructions. The printer is found on the network but I still can't print.
View 9 Replies
View Related
Aug 7, 2011
I have epson stylus sx 218. I installed drivers from avasys and tried to configure it in [url]. The first test page was good but after restarting the printer can not print.
View 6 Replies
View Related
Jan 11, 2010
the remote printer appears in cups but if I try to do a test page i get a page not found error. it even says ready under yast printers.it is set up on a remote desktop using cups
View 8 Replies
View Related
Jul 23, 2010
I have a Samsung ML 2510 USB connected to an F13 based system. The printer is registered as the default printer. A test print gives the printer what I call a wake up call and then never prints. Win XP dual boot prints fine.
View 2 Replies
View Related
Aug 9, 2010
Environment: Debian Lenny | Samba/CUPS | Network: 25 Workstations (WINXP SP3) | Printer: Samsung ML2010 (on server) That�s it. Problem: All workstations can print, except two. I formated the two workstations, installed everything again and nothing!
View 2 Replies
View Related
Sep 3, 2011
I am trying to test GAINSCHA receipt printers on opensuse 11.4They have supplied drivers and filter. I have added filter to /usr/lib/cups/filter and drivers(ppd files) to /usr/share/cups/model/gainscha/. I can add the printer model and driver from Yast.The printer is a serial printer and I connect to it using 'usb-to-serial' converter. I can raw-print direct to printer by, ' echo hello > /dev/ttyUSB0 '. It works.Serial port parameters used while setting up Cups queue are correct. ( Tested via cutecom, opening port with the same parameters and writing to the port. It is also printing).Now when I print from any application, the job is held up in Cups queue for reasons, ' no permissions to port'. I tried becoming root and printing from kwrite.
View 3 Replies
View Related
Mar 16, 2011
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Jun 29, 2011
I want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
View 1 Replies
View Related
Jun 14, 2010
I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies
View Related
May 1, 2011
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
View 3 Replies
View Related
Jan 19, 2010
How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
View 3 Replies
View Related
Aug 31, 2010
i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung
View 1 Replies
View Related
Jul 27, 2011
I have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
View 1 Replies
View Related
Aug 16, 2011
I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found
I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.
I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found
I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.
View 9 Replies
View Related
May 26, 2010
My printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.
View 11 Replies
View Related
Feb 11, 2010
I bought a new Samsung ML-2851ND. I intend to connect it via the ethernet port is has. Under Ubuntu you cannot just plug and play. To set it up you need to connect it via a USB cable (Ubuntu will have all the needed drivers to operate as soon as you plug it in). Then you can go into the advanced settings for the printer and set up the network settings with the right gateway, subnet and IP address. Once you do this you can http into the address and play with all the other settings. Please note that Samsung have fantastic Linux support and you can download the driver etc here: [URL]
All options are supported (1200dpi, duplex, toner save etc). Kudos to Samsung for making a Linux friendly product. This is the second Samsung I have and I bought it because the first worked so well with Linux. If I need to buy another Samsung are my first preference.
View 1 Replies
View Related
Mar 27, 2011
Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
[code]...
View 6 Replies
View Related
