I bought a new printer from SAMSUNG ML2245 Model. In my system (fedora12), I could not print anything. Then I found that this model samsung ML2245 does not exist in the list box. And I tried to use generic printer, that is also failed. How to install the driver for this model?
View 1 RepliesHow can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Replies View RelatedI've recently bought a Samsung R580 laptop. It is now configured as a dual boot system with Ubuntu 10.10 and Windows 7 (64bit). The wireless network functions correctly under Win7, but I have encountered problems with Ubuntu. The native drivers do not function and having identified the driver used by Win7 (net819xp.inf) that works, I have tried to install it using ndisgtk, but get the message "incorrect hardware". I have followed the ndiswrapper howto carefully without being able to get the wireless network going.
View 4 Replies View RelatedI like ubuntu alright, but prefer Debian overall. Before I reinstall Debian I was wondering if during the install if the latest release would automatically recognize the Samsung ML 1665 as the latest ubuntu release did. If not, how does one get the printer installed.
View 3 Replies View RelatedOn Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies View RelatedI've up until recently been using Mint on my n210, but as I really liked the look of openSUSE (Gnome) I have changed to 11.3. So far I love the distro, but I am having a little issue - some fn key combinations aren't working (brightness in particular). When in Mint I was able to install a couple of programs made by Voria (from Linux On My Samsung), is there such a program for openSUSE?
View 3 Replies View RelatedI've just gotmy new phone a SamsungGT-S5230! My problem is:I can't transfer any file from my ubuntu desktop over to my phone. On the CD it came with there is only a windows software called "PC Studio" and Windows drivers. As I plug in the phone via USB to the PC it offers 3 options: PC Studio, Media Storage, Background Storage. If I pick one of the first 2 options my phone says it is connected, and charges via USB. The third option says "Please Insert a MicroSD card". (I don't have such at home). Ubuntu can't see my phone, none of the options seem to work. Maybe I should buy a MicroSD card? Or is there a workaround for the windows software to run ubder Linux? I tried to install t with WINE, but it froze during the installation.
View 4 Replies View RelatedI am trying to install Ubuntu 9.10 on a Samsung Q1 Tablet PC but it reaches a point when the screen becomes smokey and then after a few seconds gets black, forcing me to abort.
View 3 Replies View RelatedI have just purchased the Samsung N150 net-book. The reason for purchasing was so I could watch movies, listen to music and browse on the go. It came with windows 7 starter and a load of pre installed Samsung crap. I was wondering whether Ubuntu would be a better choice for me since I only really want, Chrome, VLC, Spotify, MSN and Dev++ compiler.
I am very computer literate doing programming at Uni, but have not used Linux before. Also there's loads of Samsung software for extending battery life or something. Will I be able to install that on Ubuntu or not?
Tried installing all the Samsung ML-**** from the list. PS Getting really tired of booting XP every time I want to print something.
View 3 Replies View RelatedHow can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies View RelatedI have a 650Gb HDD usb drive that I wish to use with ubuntu 10.04LTS aswell as on a WINXP system. HDD is clean. My ubuntu system has a /home partition formatted to EXT3, but as I use IFDRIVE to read this partition from windows, it needs to be set to have inode of 128 eg (mkfs.ext3 /dev/sdb1 -i 128)
my way of thinking is I need to partition the drive, format the drive to EXT3 making sure that is set inode to 128 How do is the best way to do this?
Then I need to get ubuntu to talk to this drive when I plug it in How do I do this?
How do I install my Samsung SCX-4623FW/XAA multipurpose B&W Laser printer in Ubuntu Linux via USB cord on my 5-6 year old Dell desktop?
I have downloaded three files from Samsung.
/home/chuck/Downloads/UnifiedLinuxDriver_0.95.tar.gz
/home/chuck/Downloads/Smartpanel_0.95.tar.gz
/home/chuck/Downloads/PSU_0.95.tar.gz
I had an ubuntu 11.10 installation that was no longer supported and was low on disk space, so I bought a new disk and installed debian wheezy on it and made it the boot disk.
The machine had/has a samsung e2020 monitor, and ubuntu and the new debian install both recognized it as 1600x900 resolution. I ran the proprietary nvidia driver with ubuntu but did nothing at all with the debian ... it just worked.
The power supply on the machine conked out and I took it ro be replaced and dug out an old, old machine to use while the newer one was gone. Debian would not install on it. But ubuntu 11.10 did, but displayed at 1024x768 on the samsung which it recognized as a 'VGA'. It was slow, but it worked. When the newer machine came back I reinstalled it ... but its debian 7.6, which used to know the samsung at 1600x900 resolution, now runs it at 1024x768, just as the old box had!
It must be some change made to some firmware in the samsung itself? It's not very pleasant.
I've tried to install the nvidia driver , but no luck there. I see now that debian uses something called 'nouveau' to run the proprietary nvidia chip, and I'm all for that ... but it used to be able to run it at 1600x900 and now it's forgotten how.
Here they are ...
Code: Select alljfl@wsdeb:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*
800x600 60.3 56.2
848x480 60.0
640x480 59.9
[Code] ....
So I've gotten lucky, haven't I? I don't know if the display will still be ok when I restart ... so I'll save a copy of the above and try to script it, if I must, on reboot/relogin.
I just bought a Samsung 850 Pro 250GB SSD drive and have since then found out that Linux has/had a faulty implementation of queued trim (which is a synonym for NCQ I think). I'm using kernel 4.1.0 (the default selected by the Debian 8.1 installer) and I've read that Samsung drives are blacklisted for queued trim by the recent kernels. However, the output of dmesg contains the following lines, with and without TRIM enabled for the drive (i.e. with or without the "discard" option in fstab for the drive):
Code: Select all[ 1.012287] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.013438] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.013440] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.015037] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
Since the depth is not 1 but rather 31, it looks like NCQ is enabled. I've disabled TRIM on the drive for now, and whether it's safe to enable TRIM or not.
I have a Samsung ML 2510 USB connected to an F13 based system. The printer is registered as the default printer. A test print gives the printer what I call a wake up call and then never prints. Win XP dual boot prints fine.
View 2 Replies View RelatedI have F15 fresh install on Samsung Q45. The brightness function key is recognized but doesn't really increase or decrease brightness. It is set to maximum.There was a workaround in F14 for same problem.
View 1 Replies View RelatedI want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
It looks as if I'll get a deal I can't turn down and sell my old original Android phone and get a new Verizon Android. They also have a tablet, there is the present 7 and a half inch screen and a newer ten incher coming out, the smaller one is heavier but I could get it for a relatively low price. it has a usb port. Question is can I dual boot Gnome3 on it? and can I then update it? And can Gnome3 do the touch screen thing? Using Fedora of course. Or should I put the tablet off for a while?
View 1 Replies View RelatedI'm trying to tether my sprint samsung exclaim. I've tried the ubuntu network-manager and gnome-ppp. dmesg seems to show the phone connected and the cdc_acm driver loading the phone as /dev/ttyACM0 . However running wvdialconf says no modem detected.Furthermore, when I specify the device in gnome-ppp I get an input/output error.how to get tethering to work in 9.04?
View 1 Replies View RelatedI've a Samsung SyncMaster 943, widescreen I also have a GForce 8400 GS This monitor supports (as seen on website) a 1440*900 resolution. I've installed the nvidia driver (from homepage) with version 195.36.24 The NVidia X Server Settings shows only a 1360*768 as max possible resolution. So, I've edited xorg.conf, restarted PC but got no luck... here it is my xorg.conf
[Code]...
I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies View RelatedJust got my new Samsung Galaxy i9000 phone. When connecting to my laptop with an USB cable, the phone says "USB Connected", but Ubuntu does not see my phone. I am using Ubuntu not yet for a long time
View 9 Replies View RelatedI am trying to use my Samsung YP-K3 player with Ubuntu 9.10. Many people report that Ubuntu fails to recognize similar players and some fiddling with Amorak is necessary. However, my system recognizes the player fine, and I can copy files to it without any difficulties. However, the player itself fails to recognise the files that are copied to it via Ubuntu. It will play the files that were previously copied to it via Windows fine, and I can go back and copy edit the playlist in Windows and everything works accordingly, it just seems Ubuntu is copying the files over in a non-supported format or something, which is weird, because they're all just standard MP3 files, many of which were originally created under Windows.
View 5 Replies View Relatedis there any way to mount a samsung monte gts5620 on ubuntu?
is that kind of support built into the kernel? or is there a driver for it?
I recently got a Samsung ML-1660 printer and while it worked fine with the unified linux driver provided by Samsung, I didn't really like how that driver did its business with regards to installing old static libraries and other stuff that I don't need and most certainly don't want going stale and causing problems down the track.
1) Download the Samsung unified printer driver from their website (UnifiedLinuxDriver_*.tar.gz)
2) Extract /cdroot/Linux/noarch/at_opt/share/ppd/ML-1660spl.ppd to a temporary directory.
3) For 32 bit: extract /cdroot/Linux/i386/at_root/usr/lib/cups/filter/rastertosamsung* to a tmp dir
4) For 64 bit: extract /cdroot/Linux/x86_64/at_root/usr/lib64/cups/filter/rastertosamsung* to a tmp dir
[code]...
I bought a new Samsung R530 laptop, which is a 64bit, a few months ago and have been struggling to get the thing working properly since.I removed W7 and install Ubuntu 10.4, which I found was freezing periodically for five to ten minutes, then I installed 10.10 beta, finding that this too kept 'sticking'.I had hoped that the full release would have fixed the issues, but this too was slow, the mouse froze constantly and any video I played would freeze up with sound playing normally in the background.I have followed some of the threads here and none of these things have worked for me.
On my HP netbook, my old Acer laptop and my PC, everything works fine!!!I have since installed an older copy of Ubuntu 9.10 and this seems to be working fine. No 'sticking' mouse, no system locks.Its fast and smooth, just what I have come to love about linux.What has happened to the new versions of Ubuntu?
Just thought I might save someone some time if they are trying to use Mythbuntu with a Samsung LED TV. If you run into the issue where the desktop is larger than the screen even with everything set to 1920x1080i and you tried a customized EDID file to no avail. Go into the menu on the TV and select Source List, Edit Name, then chose the HDMI and change the name to be either PC, DVI or DVI-PC. Either of these three setting should correct the over sized display issue.
Now if you happen to want audio over HDMI and are using the HDMI Computer connector that Samsung so nicely provides. Make sure you don't choose either of the DVI options above as these mute the audio coming over the HDMI connector and instead enable the pin audio jack next to the HDMI connector.
I searched the forum but could not find anything to solve my problem. I installed Ubuntu via Wubi.exe from windows first time, before deciding to completely format and start with a Linux Ubuntu clean install (64-bit). When I installed it with Wubi.exe, I simply plugged in my Wave and it connected to the internet...no fuss!
Problem is, after clean installing Ubuntu, the same does not happen. I cant connect to mobile broadband. It is worth mentioning that this is my only internet connection available (mobile broadband) and I am thus unable to update, get necessary repositories from Linux etc.
I read something about usb_modeswitch being involved, manually did that, but I still cannot connect to the mobile broadband. Mobile broadband is enabled when I right-click the connections too. I set up the connection for CellC, removed the "Cellcis" username, added it and more, but it still does not connect.
Can anybody give me some pointer on how to go about fixing this connection, because as you can imagine, my Linux install is pretty useless without internet.