Ubuntu Networking :: Installing Samsung 2851ND Printer On Network
Feb 11, 2010
I bought a new Samsung ML-2851ND. I intend to connect it via the ethernet port is has. Under Ubuntu you cannot just plug and play. To set it up you need to connect it via a USB cable (Ubuntu will have all the needed drivers to operate as soon as you plug it in). Then you can go into the advanced settings for the printer and set up the network settings with the right gateway, subnet and IP address. Once you do this you can http into the address and play with all the other settings. Please note that Samsung have fantastic Linux support and you can download the driver etc here: [URL]
All options are supported (1200dpi, duplex, toner save etc). Kudos to Samsung for making a Linux friendly product. This is the second Samsung I have and I bought it because the first worked so well with Linux. If I need to buy another Samsung are my first preference.
View 1 Replies
ADVERTISEMENT
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Jul 27, 2011
I have a Samsung CLX 3175 connected via CUPS to a Ubuntu box running 11.04. After installing the Samsung Unified Printer Driver as described in this post [URL] the printer works perfectly under Linux, I even got network scanning to work under Windows via TwainSane.
The big problem is network printing from Windows over Samba, though (although I thought that this should be easier to set up than scanning..). Even after hours of trying, I could not get it to print a single page spooled from my Windows computer.the print jobs do show up in CUPS as finished, but do not actually get processed. Could this be a rights-related thing? Depending of one setting in smb.conf (namely, "cups options = raw"), the printer even makes some noise and warms up when I spool a new job -- but it does not print.
My setup is the following:
- CUPS in the current version with Samsung Driver
- Samba 3.5.8
- Windows XP and 7 clients
[code]....
View 1 Replies
View Related
May 10, 2010
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies
View Related
Oct 19, 2010
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
View 3 Replies
View Related
Jul 3, 2010
I want to install my Epson Stylus CX8400 (on my machine named windows-7) on my server. I'm using the server software so no GUI. I have the printer shared and I'm using Samba. The path to the printer is:
Code:
//windows-7/stylusCX8400
View 1 Replies
View Related
Jun 14, 2010
I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies
View Related
Mar 16, 2011
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies
View Related
Aug 31, 2010
i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung
View 1 Replies
View Related
Aug 16, 2011
I have just purchased a new Samsung ML1860 printer and I can't get it to work. Samsung provide a driver at their web site, UnifiedLinuxDriver 0.95.tar.gz I downloaded this file onto my harddrive, but I can't seem to get it to install. Instructions received said to open a terminal and type: $ sudo cdroot/autorun This did not work. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo cdroot/autorun $: command not found
I then tried to add the appropriate steps to where the file is on my harddrive etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo Colin/08.downloads/Samsung/cdroot/autorun $: command not found This didn't work either.
I tried to make the address a bit more complete, no success. etsah57@etsah57-KZ208AA-ABG-m9385a:~$ $ sudo media/Colin/08.Downloads/Samsung/cdroot/autorun $: command not found
I then found this instruction "Download and extract the driver [root@localhost root]#tar xzf [Downloaded File Name(XXXX.tar.gz)]"etsah57@etsah57-KZ208AA-ABG-m9385a:~$ [root@localhost root]#tar xzf unifiedLinuxDriver_0.95.tar.gz [root@localhost: command not found This hasn't worked either.
View 9 Replies
View Related
Jun 29, 2011
I want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
View 1 Replies
View Related
May 1, 2011
As we know the linux driver supplied by Samsung for the ml-1740 printer did not work for Debian.
Debian has removed the ml-1710 and ml-1750 drivers from its database of Samsung drivers, in my case, the driver for the ml-1710 worked well but when I try to download it now from the internet, I cannot get it to work, somewhere in the install and after some work has been done, I get a message "package not found" although the full path of the package is copy(ed) from the directory where it is saved and past(ed) after "dpkg install ".
View 3 Replies
View Related
Jan 19, 2010
How can I install Samsung's ML-1710 printer driver? I've already tried using Samsung's "Unified Linux Driver" from their website. Unfortunately, it does not work; while the installation program claims to "install" the needed driver, all attempts (including local) to print using that ML-1710 printer & printer driver set fail.
It's noteworthy that I can print on the ML-1710 printer, over the network, from both windows and other Linux (Ubuntu) workstations.
View 3 Replies
View Related
Dec 8, 2010
Have been successfully using a SCX-4824FN MFP for the past 2 years on Opensuse, trouble-free. Now, it no longer prints and am guessing it may have something to do with a recent Opensuse update? Error message states 'cannot create image', which I understand suggests Ghostscript problem, but Ghostscript is loaded and works fine with other HP printers attached to same PC (other forums also suggest Ghostscript may need installing).
Have downgraded to earlier version of Ghostscript but no joy.
View 6 Replies
View Related
May 23, 2011
I am trying to install a driver for my scx4200. Ubuntu found this driver automatically but openSUSE 11.4 (64bit) does not. I have the manufacturers Cd with a Linux folder on it but if I run "autorun" in terminal it says permission denied. I have copied the files to a new folder on my hard drive but do not know how to run "autorun" in terminal with sudo. I switched to openSUSE because Ubuntu 11.4 kept freezing. SUSE does seem much better.
View 1 Replies
View Related
May 26, 2010
My printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.
View 11 Replies
View Related
Nov 8, 2010
using Samsung ML-2580N printer driver out of the box from Ubuntu 10.04 or Ubuntu 10.10? I couldn't find the driver in the Samsung driver list.
View 1 Replies
View Related
Aug 4, 2010
The situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
[Code]...
View 6 Replies
View Related
Jul 27, 2010
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
View 3 Replies
View Related
Dec 24, 2010
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
View 4 Replies
View Related
Sep 9, 2010
I bought a wireless printer Samsung ML-2525W, now I am trying to add it as a network printer through WI-FI. Is there any way to do it if I use a WEP network, how will printer know the key?
View 3 Replies
View Related
Apr 30, 2011
I'm running Ubuntu 10.10 on a Dell Inspiron 1545, and have an HP CP1215 laserprinter that I'm using as a network printer by connecting it to the USB port on a Belkin Play N600 router (model F7D8301). The printer works fine from the Macs on the network with Belkin Router Management installed, but I'm unable to get the Ubuntu/Dell to see the printer. When I plug the printer directly into the Dell with the USB cable, I can print, so I know the driver is correctly installed. Is there a way Ubuntu can print through the router? Does the Dell/Ubuntu need Belkin Router Management installed, and, if so, how?
View 6 Replies
View Related
Jan 17, 2010
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
View 9 Replies
View Related
May 20, 2010
I intalled Ubuntu 9.10 and i am trying to connect a network printer which is on Win 7, i was able to share files but not the printer.
View 4 Replies
View Related
Oct 18, 2010
I have been trying to install a network printer with no success. I am using a laptop with Ubuntu and my printer is in a Windows-XP. I have installed samba and added the printer, but it always comes back asking for the authentication. I do not have in my Windows-XP accounts with password, if I use one of my users registered in Windows it does not reconizes it. If I use the user/pass of ubuntu it does not work.
View 2 Replies
View Related
Jan 6, 2011
i have a printer which is shared across the network. All the computers have ubuntu installed. I want that some computers should not be allowed to use this printer.
View 8 Replies
View Related
Jan 23, 2011
I recently installed Xubuntu 10.04 on a desktop computer. Everything works fine aside from the fact that I can't access my Dell 3010cn network printer. The printeis accessible and work flawlessly with every other computers running XP, Vista and Ubuntu 9.10I installed the drivers and configured the printer with the exact same parameters as on my 9.10 laptop. The thing is that the printer is always "offline" as if my computer could not connect to it. Also, when I try to acces its options via its fixed IP adress (192.168.1.107) through Firefox, I cannot reach the printer. However, the printer responds to every other computer in the house.What am I doing wrong? Is there a firewall in 10.04 that keeps me from accessing to the printer?
View 1 Replies
View Related
Mar 28, 2011
I recently purchased an hp 3050 printer because of it's wireless functionality. I found this (click me) where someone got it working. I tried to follow it step by step, but I couldn't get the ad-hoc network to work reliably.
I used the network manager to locate the printer's ad hoc network (it correctly identified it as ad-hoc) I then edited this connection, made it a "Link-local only" network in the ipv4 tab and then connected.
Usually what happens is that networkmanager claims that it has connected. I get a signal strength and everything, but I can't actually communicate with the printer. I entered the ip address (into firefox) given to me by asking the printer to print it's network settings, and I don't get a response.
Notice that I said "usually". I've tried this many times, and one time, I actually connected to the printer, got the browser interface, tried to use the interface to connect the printer to my wireless router, and failed (then the browser interface didn't work anymore [which of course would make sense if the printer tried to connect to the router, but I don't even know if I got far enough into the process for that to be the problem]). The printer does not show up as a device on my wireless router (my router has a list of all devices that are logged into it), so it failed somehow. I have never been able to duplicate that "success" again in spite of the fact that I've used the printers control panel to reset network defaults.
It seems that the people who were on the questions forum had no problem connecting the ad-hoc network. I kind of suspect that there is something wrong with the printer's wireless device.
PS: I noticed that hp-setup has an option to plug a wireless printer in via USB, set it up then it should work wirelessly, however, I couldn't get that to work with this printer.
View 3 Replies
View Related
Jul 7, 2011
I have a desktop and a laptop connected by ssh (Places>Connect to Server). This works OK for file sharing but the laptop does not recognize the 2 printers attached to the desktop machine. As I understand (??) it, if the 2 printers are set up as 'shared' in CUPS (as they are on the desktop) then they should be recognized by the other machine on the network. But this is not happening. Is this the right way to network printers?
View 3 Replies
View Related
