Ubuntu :: Lucid Boots To Black Screen?
Jun 20, 2010
So I've been using Ubuntu for about a month now. Everything is great and all but today when I booted into Ubuntu everything was going well--the splash screen appeared and the dots were doing their thing and all--but then there was just a blank screen. Some people have had this problem after a fresh install of Lucid, but its been working for a while so I don't get why it isn't working... I didn't do anything to the system except run some updates before I turned off the computer.
View 9 Replies
ADVERTISEMENT
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jun 27, 2011
I just set up a ubuntu 11.04 Desktop 32-bit installation on an older pc that I found in the basement. It was running xp before and had 2 hard drives so I left the xp install alone and installed ubuntu on the second hard drive. It all booted up and worked fine until I rebooted it for the 2nd or 3rd time, now after I select ubuntu from grub it just loads to a black screen. Even in recovery mode if flashes the text across the screen and then also goes to a black screen. Now what seemed really wierd is that the same thing occurs if I try to boot from the usb drive i used to install it the first time, but win xp boots fine.
View 2 Replies
View Related
Jul 17, 2010
after spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies
View Related
Jan 5, 2011
It's my first time trying to install Ubuntu. My problem is that booting from USB stick or trying to run "install to drive" both result in a black screen. Here are my specs:
HP EliteBook 8440p Intel Core i5 M520 @ 2.40 GHz NVIDIA NVS 3100M
Ubuntu 10.10 64-bit deployed to USB stick using Universal USB Installer 1.8.2.2.Searching around seems the problem is the way Nvidia graphics card is handled. I found a recommendation to set 'nosetmode' option, but found no easy way to do this on the current USB boot menu.Currently tried pressing TAB on the boot menu option and adding '--nosetmode' to command line, but result is the same.Does anyone have any suggestion about what I should try next?
View 3 Replies
View Related
May 2, 2010
I upgraded from 9.10 yesterday, overall, I do like this; but, it has issues:Sometimes, it boots to a login screen, no graphics. I must reboot; then,I do get the graphical login screen.My graphics is an integrated nVidia GeForce 6100. nForce 405.When I look to download more drivers, I see Hardware Drivers jockey-gtk,
and nVidia Binary X.Org driver 185 are installed. I suspect the graphics drivers to be the issue.I see the option to install X.Org driver 173, and 96 for older cards. Is my card that old?My desktop: x64 with 1 gig of RAM.Lucid also boots slower than Karmic, could this be the nVidia driver as well?
View 3 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Apr 29, 2011
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
View 9 Replies
View Related
Jun 10, 2011
I was following a lesson with my UNIX Academy training and by mistake made a change to inittab. now it boots into black screen. How can I get into shell to fix inittab
View 2 Replies
View Related
Oct 2, 2010
Well, it's a long story, but to make it short I foolishly upgraded my wife's netbook many months ago to 10.04, not knowing that the new xserver version will cause me lots of grief with the gma500 driver. Back then, I ran an update that completely borked my system, and my only fix was to do another clean install. Since the, I just did not do any more upgrades.
So, months have gone by, and the netbook has not had any upgrades. I've read some instructions in the gma500 megathread on how to safely upgrade the system. To start, I had to purge the psb-kernel-source, do upgrades, and reinstall the psb-kernel-source and the other poulsbo drivers. I did all that, and now it boots to a black screen. I can't ctrl-alt-f1 to a terminal session either.
I really don't want to do another clean install. With the crappy broadcom driver as well, it's a real chore. And because of the crappy broadcom driver, I can't figure any way to get a wifi connection from the command line either.
View 9 Replies
View Related
Jun 18, 2011
I am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
May 4, 2010
I get a black screen (with tiny bits of white on opposite corners of the screen) every time after logging into Kubuntu Lucid AMD64. The only thing I can do is move my mouse pointer over that black screen which doesn't go away. I booted into recovery mode and with command prompt typed "startx" to start graphical mode. That resulted in the same black screen. Then I decided to reboot and install Fluxbox via the command prompt under recovery mode. Now, I'm able to view graphically under Fluxbox after selecting it over the default KDE and logging in. But how do I get regular KDE/Kubuntu to work again? I don't know what happened to make it stop working!
View 1 Replies
View Related
Sep 2, 2010
Yesterday, 9/1/2010, I received a bunch of patch updates for 10.04 (64-bit) and applied them to my laptop (Dell Latitude E6510, Intel Core i5). After they applied, it asked me if I wanted to reboot now or later. I chose later to finish my work and then shut my laptop off. This morning, I turned it on, only to get a black screen during bootup and also during login. I know it's working behind the scenes because I can hear the drum sound when it's ready to login and I can still press the power button and hit enter to shut it down. I tried using Alt+F2->F12 but it would only show a black screen.
My temporary workaround was to hold the shift button during startup to get the grub menu and then select the older 2.6.32-23 kernel to bootup instead of the newer 2.6.32-24. I am able to boot ok in the older kernel and it's working fine, but I don't know what is causing the problem for the newer one and cannot boot into that one.
I believe I was running 2.6.32-24 fine up until I received a bundle of patches to apply to my system. So the question is, is there a way to figure out what patches were applied in yesterday's bundle so I can back them out? If not, how can I fix this so I can run the newer updated kernel?
View 4 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
May 2, 2010
I recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:
Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
[code]...
View 9 Replies
View Related
May 3, 2010
I just upgraded from 9.10 to 10.4. I am having the following problem:
When I attempt to switch from the user that I am currently logged into, to another user who is also logged in, I get a black screen.
To elaborate, here is the exact sequence of events:
Code:
- Boot ubuntu and login to user A
- Then Click on power menu (top right corner) and select: Switch from A
- I get the login screen
- I select user B and enter my password
[Code].....
I did try to change my session (at the login screen) to gnome-failsafe, xterm, even kde, but still I get the black screen.
View 9 Replies
View Related
Jun 11, 2010
I have a Logitech Quickcam Chat webcam (USB ID 046d:092c) that's worked with my Ubuntu with minimal problems (just some nVidia driver crap) for ages now. I'm not using nVidia anymore (Intel now), but since my fresh install of Lucid, my webcam doesn't seem to capture anything. It is detected by lsusb, but when I open Cheese, the picture is just black. Skype doesn't give me any video at all, not even that annoying static or green lines. Clicking the Test button in my Skype Options undedoesn't do anything;double-clicking it gives me a full-screen grey screen - pressing Escape takes me back to the preferences window. After I get the grey full screen and press Escape, the Test button is gone until I close the Options window and open it up again.Going into gstreamer-properties and testing v4l2 (under Video -> Default Input) just shows me the 'Testing ... Click Ok to finish' window for ages until I close it - no video appears or anything and I'm not entirely sure what I'm supposed to be seeing. Testing with the 'Test Input' option does give me the coloured lines and static. Testing v4l seems to make it crash, but no error comes up in the terminal I'm running it from.lsusb output:
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:092c Logitech, Inc. QuickCam Chat
[code]...
View 9 Replies
View Related
Jun 26, 2010
im using Ubuntu 10.04 and whenever i enable it and try to iniate it it just makes my screen black =/. It sucks because i really loved that feature (on 64-bit btw)
View 9 Replies
View Related
Jul 27, 2010
I just upgraded to Lucid Lynx, and like most people, I'm getting the black screen during boot. So, I went into the grub edit screen, and I tried every variation of the nomodeset fix I could find. So far, nothing has worked. I don't know what graphics card I have, but it's always given me problems.
View 4 Replies
View Related
May 15, 2010
Every other website works fine, I just installed the flash plugins and updated my system with Download Manager. But Myspace continues to fail.
View 5 Replies
View Related
Oct 7, 2010
I am been trying to install Ubuntu 10.04.1 x86 for 4 days now.I have installed and reinstalled over two dozen times.I have tried 3 different live cds. I have tried usb install with both the x86 and with the x86 alternate cd.
I can boot the live cd just fine. However when I try to install, it goes though the entire process and seems to have worked. It then boots to a black screen.I have searched and searched without avail for a solution to this problem.I forget everything I have tried or I would list it all here.I should mention that I am a linux noob.
View 9 Replies
View Related
Oct 5, 2010
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
View 1 Replies
View Related
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
May 12, 2010
I would like to disable the start up sound when Lucid boots up and enters X. I have already unticked:
System, Administration, Login Screen: [ ] Play Login Sound
Yet I still get the login sound.
View 8 Replies
View Related
Aug 12, 2010
Occasionally Lucid boots to what I can only describe as a command line desktop-ie the whole screen is like a terminal, theres no GUI, have to restart by hitting the power button. Is there anyway I can stop it, or start the GUI from there?
View 4 Replies
View Related
May 11, 2010
I just upgraded from Karmic to Lucid and my system will no longer boot. The upgrade completed without any error messages, but upon reboot, it hangs at the loading screen. I cannot start the system in recovery mode either. Same issue happens. To get to the command line, I've appended:
init=/bin/bash
to the kernel line in grub. I then remount so I have r/w access.
It appears to be an issue with udev. While the loading screen is "loading," udevd_work scrolls a bunch of stuff that's too fast for me to read (nor can I copy and paste it).
/var/log/udev isn't showing any recent errors, only messages from before the upgrade.
View 3 Replies
View Related
Aug 7, 2011
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
View 1 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
