I recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:
Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
[code]...
recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:
which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN
I have installed kernel sources,xorg x11 headers and gcc.
I'm running Ubuntu 9.10 on an HP Desktop with an ATI Radeon 2600 pci card that has four outputs. I want to run the same 3-monitor array that I had in windows. Is it possible to get this thing running and configured right in Linux? At the moment I can only get it to send a signal to 2 monitors. I installed the drivers step by step from the manufacturer, but I can't seem to get a signal to all 3 monitors.
View 6 Replies View RelatedI didn't found working driver for my card yet. Using OpenSUSE 11.2 KDE, Motherboard MSI 648F Neo, Pentium4 2.8GHz, 2 x 1GB DDR.I've found, that my card should be supported according to HCL/ATI Video Cards - openSUSEInstallation following ATI drivers - openSUSE Easy Way didn't work because of chcecksum difference (x11-video-fglrxG02), Repositary Way too. Hard Way Installation resulted to disability of Graphic Environment and I wasn't able to fix that (finally, I somehow get running KDE, but Kwin always broke down, so system was unuseful).
I also tried packages found by Software search (Software.openSUSE.org), so package 'xorg-x11-driver-video-radeonhd' but nothing works for me, some of them provide result of "glxingo | grep direct" -> "No", some of them "Yes", but in this case I wasn't able to run "glxgears", because of error "drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info." Desktop Effects I cannot run anyway. how to get graphic acceleration working. It will be great if is here someone with exactly same, or similar card, he could write a step-by-step guide to do that. Starting with fresh installation of OpenSUSE (not corrupted by my previous tries) is not problem.
When I upgraded my 2004 Apple G5 PPC tower from 10.04 lucid to 10.10 server the ATI RadeonHD 2600 video drivers got bonked. I can only get the command line.
View 5 Replies View RelatedI'm trying to get a brand new Radeon HD 6670 running, using kernel 2.6.39 (CONFIG_DRM_RADEON_KMS=y, CONFIG_DRM_RADEON=y) and gentoo.First off a I tried to run it out of the box, but while booting the screen got black after:
Code:
Loading Turks MICROCODE
Refined TSC clocksource calibration: 2812.324 MHZ
[code]...
The screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]
View 5 Replies View RelatedMy KT4AV-based PC has burned up two GEForce 6200 cards, so I decided to try an AGP bus Radeon HD 3650.At the same time as the nVidia card went "black screen" (no video at all, not even text) my CMOS battery died.I put in a new CMOS battery and fixed up the CMOS settings as well as I can.I put in an old Trident TVGA96PCI cardnd got as far as terminal mode, but even with the xserver-xorg-video-tridentdriver already n the system, I couldn't get the display manager to run. I gave up on the Trident card becauseold and bought a new Radeon HD 3650 card and changed the display bus from PCI toAGP in the CMOS settings.
The Radeon card now also gets me only to terminal mode.tried coaxing the system by renaming xorg.conf, but that didn't help - rebooting still gets me nowhere,no new xorg.conf file. The renamed one is still configured for the nVidia card. The xserver-xorg-video-radeon driveris also present, as "sudo apt-get install xserver-xorg-video-radeon" tells me it's already the latest version.I'm presently stuck without direct network support, as the ethernet connection hangs the computer during rebootthe message, "ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready." If I unplug the ethernet cablefor starting successfully, when I plug it back in while I'm at the command prompt, I get a message to the effectthat eth0 up and running,"ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready" messageappears again and the sytem again freezes.I have successfully pinged this PC from another on the network, but not while it's hung up at the above-quotedmessage. In that case, it's "unavailable."How do I purge the system of the nVidia stuff and replace it with an approporiate Radeon driver ?
I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.
View 7 Replies View Relatedi have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log
Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
[code]...
I am having a frequent (once every 3-4 minute) random momentary black screen and it recovers after 2-3 seconds. I have notice this since the early Fedora 12, but the frequency increases lately.I have turned off the KMS, KDE power management, and screen saver, but it did not help. I have radeon 3450.
View 4 Replies View RelatedI'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:
* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen
[code]...
I just installed Ubuntu 10.04 64 bit and I'm having a problem with the graphics card.
I have dual screens, and I'm using the default card. My Left screen is perfectly normal but my right screen has a black bar, roughly 2cm wide, along the left hand side of it. And that hole screen is shifted to the left 2cm (so if I maximise a window in it you can't see about 2 cm of the right edge).
I'm not sure why this is happening. Worked on Karmic. Haven't installed anything, just the defaults. My graphics card is a Radeon HD 4870.
Also, I couldn't get Compiz to work with this card on Karmic, is it possible to get it to work here on Lucid? I heard they were improving the drivers. If so, how?
This printer is popular and is not included in ubuntu package. [URL]
View 5 Replies View Relatedafter spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies View RelatedI'm trying to install Ubuntu on an iMac G4, and I had a promising situation the first time through but I botched the install due to my newbishness and haven't been able to boot from the install CD since.
Here's the situation:
Hardware
800 Mhz G4
256 MB RAM
15" LCD display
32 MB GeForce2 MX Video Card
"Standard" Airport Wireless Card
(more details here)
What Happened: After poking around on the forums some and reading through some of the wiki pages, I decided that 8.04 would be a good place to start, so I downloaded and burned an install disc. My first attempt booted almost perfectly, but I confused the "booting from the CD" with "installed Ubuntu" (Iknow, I know...), and promptly rebooted back into OS X.
Since then, I've been unable to successfully boot from the CD. Using the 8.04 disc, I'm prompted for what style of install I'd like, and I feebly type "live," the ramdisk loads, and then the screen goes blank, reads "loading" in the upper left for a second, the optical drive whirs for a bit, and then everything hangs on a black screen with a white cursor in the upper left. I thought I might just be impatient, so I let it sit overnight, but there was no change in the situation.
I know this isn't much information to work with. Is there a way to enable a more robust boot description? Something that will let me know what's going on when the screen goes blank and the optical drive whirs?
finally just got ubuntu to install on my emac a1002, I had to use the powerpc version. The install went fine, it restarted and loaded ubuntu, but after it loads goes to a blank black screen. And I imagine it sits there forever, yet I've only left if for about 5mins or so. The emac is from 2003, and has a 1ghz processor (Powerpc) and has 256mb ram.
View 1 Replies View RelatedI've just tried installing Ubuntu 10.04 on my powerpc. It installed fine, and booted first time ok, but since restarting it just seems to boot into a black screen. My monitor says 'going to sleep mode'
I don't think it's hanging on anything, as I can hear sounds if I play around with the keyboard. Could this be something to do with the resolution being too high? If so, can anyone tell me how I go about changing this?
I have a 8.2 MBP with a 1680x1050 screen and a 6490M graphics card. I'm trying to boot from a usb stick ubuntu live. I'm able to get to the ubuntu menu, asking to install or start live boot, but when I select live boot I get a black screen( backlight is still on but entire screen is black). I've waited at that screen for quite some time with no luck.
View 2 Replies View RelatedI get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
View 8 Replies View RelatedI turned on my computer and selected Ubuntu with Linux 2.6.38-8-generic and press enter, the screen goes black and my computer starts beeping
View 4 Replies View RelatedI get a black screen (with tiny bits of white on opposite corners of the screen) every time after logging into Kubuntu Lucid AMD64. The only thing I can do is move my mouse pointer over that black screen which doesn't go away. I booted into recovery mode and with command prompt typed "startx" to start graphical mode. That resulted in the same black screen. Then I decided to reboot and install Fluxbox via the command prompt under recovery mode. Now, I'm able to view graphically under Fluxbox after selecting it over the default KDE and logging in. But how do I get regular KDE/Kubuntu to work again? I don't know what happened to make it stop working!
View 1 Replies View RelatedSo I've been using Ubuntu for about a month now. Everything is great and all but today when I booted into Ubuntu everything was going well--the splash screen appeared and the dots were doing their thing and all--but then there was just a blank screen. Some people have had this problem after a fresh install of Lucid, but its been working for a while so I don't get why it isn't working... I didn't do anything to the system except run some updates before I turned off the computer.
View 9 Replies View RelatedI've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies View RelatedJust did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:
1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..
2) external monitor never becomes active..
the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)
(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies View RelatedYesterday, 9/1/2010, I received a bunch of patch updates for 10.04 (64-bit) and applied them to my laptop (Dell Latitude E6510, Intel Core i5). After they applied, it asked me if I wanted to reboot now or later. I chose later to finish my work and then shut my laptop off. This morning, I turned it on, only to get a black screen during bootup and also during login. I know it's working behind the scenes because I can hear the drum sound when it's ready to login and I can still press the power button and hit enter to shut it down. I tried using Alt+F2->F12 but it would only show a black screen.
My temporary workaround was to hold the shift button during startup to get the grub menu and then select the older 2.6.32-23 kernel to bootup instead of the newer 2.6.32-24. I am able to boot ok in the older kernel and it's working fine, but I don't know what is causing the problem for the newer one and cannot boot into that one.
I believe I was running 2.6.32-24 fine up until I received a bundle of patches to apply to my system. So the question is, is there a way to figure out what patches were applied in yesterday's bundle so I can back them out? If not, how can I fix this so I can run the newer updated kernel?
I'm trying to install Kunbuntu 10.0.4 on a late 2009 27" Core i7 iMac. Unfortunately the screen is always black while the CD/DVD installer seems to work. All firmware updates neede to the machine have been applied and it is non affected by the known problems of the late 2009 27" iMacs.
View 1 Replies View RelatedI just upgraded from 9.10 to 10.4. I am having the following problem:
When I attempt to switch from the user that I am currently logged into, to another user who is also logged in, I get a black screen.
To elaborate, here is the exact sequence of events:
Code:
- Boot ubuntu and login to user A
- Then Click on power menu (top right corner) and select: Switch from A
- I get the login screen
- I select user B and enter my password
[Code].....
I did try to change my session (at the login screen) to gnome-failsafe, xterm, even kde, but still I get the black screen.
I have a Logitech Quickcam Chat webcam (USB ID 046d:092c) that's worked with my Ubuntu with minimal problems (just some nVidia driver crap) for ages now. I'm not using nVidia anymore (Intel now), but since my fresh install of Lucid, my webcam doesn't seem to capture anything. It is detected by lsusb, but when I open Cheese, the picture is just black. Skype doesn't give me any video at all, not even that annoying static or green lines. Clicking the Test button in my Skype Options undedoesn't do anything;double-clicking it gives me a full-screen grey screen - pressing Escape takes me back to the preferences window. After I get the grey full screen and press Escape, the Test button is gone until I close the Options window and open it up again.Going into gstreamer-properties and testing v4l2 (under Video -> Default Input) just shows me the 'Testing ... Click Ok to finish' window for ages until I close it - no video appears or anything and I'm not entirely sure what I'm supposed to be seeing. Testing with the 'Test Input' option does give me the coloured lines and static. Testing v4l seems to make it crash, but no error comes up in the terminal I'm running it from.lsusb output:
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:092c Logitech, Inc. QuickCam Chat
[code]...