I was following a lesson with my UNIX Academy training and by mistake made a change to inittab. now it boots into black screen. How can I get into shell to fix inittab
View 2 RepliesI'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI just set up a ubuntu 11.04 Desktop 32-bit installation on an older pc that I found in the basement. It was running xp before and had 2 hard drives so I left the xp install alone and installed ubuntu on the second hard drive. It all booted up and worked fine until I rebooted it for the 2nd or 3rd time, now after I select ubuntu from grub it just loads to a black screen. Even in recovery mode if flashes the text across the screen and then also goes to a black screen. Now what seemed really wierd is that the same thing occurs if I try to boot from the usb drive i used to install it the first time, but win xp boots fine.
View 2 Replies View RelatedSo I've been using Ubuntu for about a month now. Everything is great and all but today when I booted into Ubuntu everything was going well--the splash screen appeared and the dots were doing their thing and all--but then there was just a blank screen. Some people have had this problem after a fresh install of Lucid, but its been working for a while so I don't get why it isn't working... I didn't do anything to the system except run some updates before I turned off the computer.
View 9 Replies View Relatedafter spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies View RelatedIt's my first time trying to install Ubuntu. My problem is that booting from USB stick or trying to run "install to drive" both result in a black screen. Here are my specs:
HP EliteBook 8440p Intel Core i5 M520 @ 2.40 GHz NVIDIA NVS 3100M
Ubuntu 10.10 64-bit deployed to USB stick using Universal USB Installer 1.8.2.2.Searching around seems the problem is the way Nvidia graphics card is handled. I found a recommendation to set 'nosetmode' option, but found no easy way to do this on the current USB boot menu.Currently tried pressing TAB on the boot menu option and adding '--nosetmode' to command line, but result is the same.Does anyone have any suggestion about what I should try next?
I am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies View RelatedI downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies View RelatedI upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
Well, it's a long story, but to make it short I foolishly upgraded my wife's netbook many months ago to 10.04, not knowing that the new xserver version will cause me lots of grief with the gma500 driver. Back then, I ran an update that completely borked my system, and my only fix was to do another clean install. Since the, I just did not do any more upgrades.
So, months have gone by, and the netbook has not had any upgrades. I've read some instructions in the gma500 megathread on how to safely upgrade the system. To start, I had to purge the psb-kernel-source, do upgrades, and reinstall the psb-kernel-source and the other poulsbo drivers. I did all that, and now it boots to a black screen. I can't ctrl-alt-f1 to a terminal session either.
I really don't want to do another clean install. With the crappy broadcom driver as well, it's a real chore. And because of the crappy broadcom driver, I can't figure any way to get a wifi connection from the command line either.
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I am been trying to install Ubuntu 10.04.1 x86 for 4 days now.I have installed and reinstalled over two dozen times.I have tried 3 different live cds. I have tried usb install with both the x86 and with the x86 alternate cd.
I can boot the live cd just fine. However when I try to install, it goes though the entire process and seems to have worked. It then boots to a black screen.I have searched and searched without avail for a solution to this problem.I forget everything I have tried or I would list it all here.I should mention that I am a linux noob.
1. I am using CentOS 5.4 and I try to use inittab at the etc/inittab to initiate a program at startup
2. Below is my script and saved as heritrix.sh
#!/bin/bash
export HERITRIX_HOME=/root/heritrix-1.14.3
cd $HERITRIX_HOME
chmod u+x $HERITRIX_HOME/bin/heritrix
$HERITRIX_HOME/bin/heritrix --admin=LOGIN:PASSWORD --port=9090
3. I did the chmod +x for the permission already.
4. I not confirmed whether it is running at startup.
5. the script is no problem as I have check it
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI was in the middle of deleting the Xine movie player, and clicked a box wrong. I lost everything possible on the graphical desktop as well as a log in screen for Ubuntu 9.10 (karmic). Since then I did a few things:1. apt-get install ubuntu-desktop2. apt-get install kubuntu-desktop3. apt-get remove kubuntu-desktopAfter all this, I still have the login screen for Kubuntu. But I don't want that. I want to get back to the Ubuntu login screen, and the orange colored desktop. Right now -- after I log in -- I only have a terminal to use. And I have the blue background of Kubuntu. What do I need to do to get rid of the Kubuntu graphics and back to my original login screen, plus the Ubuntu (karmic) graphics and toolbars / menus?
View 2 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedi am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.
View 4 Replies View RelatedI've been a happy Arch Linux user for years now. Recently, on my eee 1000he (an Atom netbook with intel GMA graphics) I've been seeing strange things. After it has been on for some time (usually hours), the screen starts to jitter, just for a fraction of a second, every now and then. After this has happened some times, the screen goes black (one time it went red). The backlight is still on and I can still ssh to the machine which reacts normal appart from the black screen. I can only regain the screen when rebooting. What could this mean? Is it hardware or software? X logs don't shown anything weird, where should I look? I haven't found anyone with the same problem on the net.
View 4 Replies View Relatedlike any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
Everything was ok with my PC up until today when I booted and found out that my screen resolution was all messed up making my desktop look like this. My distribution is Ubuntu 11.04.
View 1 Replies View RelatedI recently installed Ubuntu 11.04, I tried to boot it and it was like my windows screen before I restarted my computer however it was all jumbled and scattered everywhere, how can I fix this?
View 7 Replies View RelatedWhen i try to boot up for the 1st time it says: Completing Ubuntu Install. 5, 4, 3, 2, 1, 0 ... No Signal.I have installed with Wubi, and also tryed with a USB. Nothing works. Signal.
View 9 Replies View RelatedI just installed Ubuntu and after the restart all I get is a black screen. Sounds like the program booted up but I can't see any thing.
Using a Gforce 9400 vid card.
The windows programs run through the PlayOnLinux [URL].
I have installed PlayOnLinux 3.8.8, and the game Call of Duty 4 (COD4).
When run it, the sound is fine but the black screen.
The video card drivers are upgraded, is NVidia GeForce 8600M GT.
My system is openSUSE 11.3 with KDE.
I'm using Ubuntu 10.04 and i can't find inittab on my system? Where did it go? Has Ubuntu removed this file? How can i find out about runlevels now?
View 4 Replies View RelatedThe default setting of linux is run level 5 (Red Hat 9) I want to use my system in Runlevel 1. For that purpose i 1st check the permission which were
-rw-r--r--
I want to edit the File " vim /etc/inittab " in the terminal . which line should i edit so I may use it in a single mode.
2-The second thing i want to ask that before editing any important file which are /etc like "inittab" can i 1st make it's copy and keep it in my home directoty so,in case of any mistake I can get my original file?
I installed Docky, and docky has taken part of my screen. I have 80% of my screen layout. I do not know how to get back my full screen. how to get my full screen? worst case scenario, I do not mind un-installing Docky, but do not know how to do this.?
View 3 Replies View RelatedFirst off I'm loving my ubuntu experience on my other devices. My netbook and other laptops run wonderfully. I'm trying to get my HP dv6700 up and running but I'm having trouble right out of the gate. When I boot up on the CD the screen becomes "messed up". I can actually still see what is there, I just see basically three copies of everything, almost like it is out of sync. I assume this is a graphics card driver issue but how can I resolve this when it does it upon the installation screen? I'm trying to install Ubuntu 10.04.1.
View 4 Replies View Relatedi wanted to fix splash screen, to be in 1680x1050 resulution, so i've found this: [URL].... After restart i don't have Ubuntu, with Linux 2.6.35-22-generic, just Ubuntu, with Linux 2.6.35-22-generic (recovery mode) My grub.cfg
[code]....