Ubuntu :: Lucid X64 Boots To Login Screen
May 2, 2010
I upgraded from 9.10 yesterday, overall, I do like this; but, it has issues:Sometimes, it boots to a login screen, no graphics. I must reboot; then,I do get the graphical login screen.My graphics is an integrated nVidia GeForce 6100. nForce 405.When I look to download more drivers, I see Hardware Drivers jockey-gtk,
and nVidia Binary X.Org driver 185 are installed. I suspect the graphics drivers to be the issue.I see the option to install X.Org driver 173, and 96 for older cards. Is my card that old?My desktop: x64 with 1 gig of RAM.Lucid also boots slower than Karmic, could this be the nVidia driver as well?
View 3 Replies
ADVERTISEMENT
Jun 20, 2010
So I've been using Ubuntu for about a month now. Everything is great and all but today when I booted into Ubuntu everything was going well--the splash screen appeared and the dots were doing their thing and all--but then there was just a blank screen. Some people have had this problem after a fresh install of Lucid, but its been working for a while so I don't get why it isn't working... I didn't do anything to the system except run some updates before I turned off the computer.
View 9 Replies
View Related
Mar 19, 2011
I have a Ubuntu 10.10 system that I haven't been using in a while. Upon turning it on, it boots to a stripped down login screen (not the usual nice one) with a warning about power configuration. When I try to login it flashes a terminal and then reverts back to the login screen. I recorded a quick video if it helps: [URL].
View 2 Replies
View Related
Jun 2, 2010
gdm starts...but login screen does not appear..cursor moves but no HDD activity also.
View 5 Replies
View Related
May 1, 2010
Just did a nice new fresh install of Lucid, and I wanted to change the login screen. I've found a few tutorial on how to change the background image, but I want to change the entire thing.You used to be able to do this through the System > Administration > Login Screen dialog, but now you can't
View 9 Replies
View Related
May 4, 2010
I get a black screen (with tiny bits of white on opposite corners of the screen) every time after logging into Kubuntu Lucid AMD64. The only thing I can do is move my mouse pointer over that black screen which doesn't go away. I booted into recovery mode and with command prompt typed "startx" to start graphical mode. That resulted in the same black screen. Then I decided to reboot and install Fluxbox via the command prompt under recovery mode. Now, I'm able to view graphically under Fluxbox after selecting it over the default KDE and logging in. But how do I get regular KDE/Kubuntu to work again? I don't know what happened to make it stop working!
View 1 Replies
View Related
May 15, 2010
My login screen is still the old one from Karmic (brown) after updating to Lucid. How do I update to the new purple look?
View 3 Replies
View Related
Aug 1, 2010
I can change the background but I have been trying to change the login itself.
View 2 Replies
View Related
Jun 11, 2010
I installed Ubuntu for the first time yesterday by running Wubi on Windows Vista Home Premium. For all of yesterday and up to lunchtime today Ubuntu was working fine. I followed the instructions on a forum post to remove Evolution Mail via the synaptic applications menu. I proceeded to log out of Ubuntu and reboot (I hoestly can't remember what for) Anyway, ever since I have not been able to log in to Ubuntu. I enter my username and password as normal and they are accepted, however moments the log in page displays again. This continues in an endless loop. The password is definitely correct because I get an authentication error if I enter anything else. I know I am not the only person experiencing this issue.
View 9 Replies
View Related
Jun 30, 2010
I want my Ubuntu 10.04 to login to an Xterm session every time, so I changed it to auto login to Xterm in the login screen settings. This worked fine until I went to do something in a gnome session again, and now even though it is still selected as logging into Xterm automatically, it logs into a Gnome session. Can anyone help me with fixing this?
View 5 Replies
View Related
Sep 14, 2010
So I have Ubuntu Lucid machines about 20 of them. Configured via ldap authentication. I seem to be running into a rather strange logout problem. Whenever users click logout they're logged out, however after that all i get is the background screen with the cursor. The cursor is able to move, but no login screen.If i go to a terminal window alt+f1 and do a service gdm restart, then the login screen goes back to normal.
View 3 Replies
View Related
Oct 29, 2010
I actually got my boss to let me put Ubuntu on a laptop for a client and it works like a champ. I have it all setup but there's one thing I'd like to do on it. I have an admin user (the one I created during the install) and a desktop user (for the person receiving the laptop). I would like to hide my admin user from the login screen, so when it boots up all the user sees is their name. If I need to help them with something/install software I can choose other and login as my admin user.
It appears this was rather easy in 9.10 and previous but I can't figure out how to do it in 10.04. To be clear, I want to edit the user list, not disable it entirely. I've tried changing the user id, I found a post that claimed IDs less than 1000 were not shown on the login screen, this proved un-true in my case.
View 9 Replies
View Related
May 5, 2011
I just did a fresh install of Lucid on my desktop. The boot background splash screen comes up very fast, but then it is about a 1 minute wait until the login prompt appears. Then once I enter my login credentials, GNOME loads up ASAP. It wasn't this slow before I reinstalled. Anyone know why this could be? Everything works.
View 4 Replies
View Related
Jul 30, 2010
I installed Lucid Lynx on a medium-old system, Athlon 2200+ with an ATI video card. No problems during the install itself. The problem is that when I boot into the login screen, I get a bunch of blank boxes. If I move the mouse around, I can see various areas highlighted, but I can't actually see the menu options. I can type in my username and password to log in (not being able to see what I'm typing), but then the desktop panels are empty boxes - once again I can mouse over them to get empty drop down menus, but I can't see anything else.
I've had enough experience with Ubuntu in the past to do some troubleshooting myself. Usually I would just boot into a terminal, switch Xorg to use the vesa driver and go from there. However, a number of decisions in Lucid Lynx have made troubleshooting practically impossible.1 - No grub menu. No way for me to pick a safe boot option.2 - Install CD doesn't come with any rescue boot options.3 - Ctrl-Alt-Backspace to kill the X server and Ctrl-Alt-F1 to boot into a shell don't work.4 - the default filesystem is ext4, which means my old rescue CDs aren't likely to be of much help.Sigh. I understand that Ubuntu is trying to make things look pretty and all, but these user-friendly changes are making it near impossible to fix a problem like the one I have. I just downloaded a System Rescue Linux CD but it's kind of late to be trying it out now.
View 3 Replies
View Related
Jan 20, 2011
Put an remote desktop launcher on the lucid login screen.
I'm running a ubuntu lab, and adding an rdesktop launcer to the login screen would really make login much easier for the users, so they don't have to login twice. First into lucid and then into windows with rdesktop.
I'v already made the rdesktop launcher on the lucid desktop, but where (if possible) do I put it so it will also be avalible in the lucid login screen ?
View 3 Replies
View Related
May 1, 2010
1st install no good, but did second to fix some possible mistakes.Booted to login prompt and then, after login, nothing until entered telinit 4, then scrambled screen, then changed to probably the normal screen background of grey/white with numerous white globes, but nothing else and cursor moved, but wouldn't function on occasions also got box with login name, password locations.Got message of "Display not set" and that the problem was so complex it couldn't be explained with these minimal resources.Did third full install and changed screen option from my known resolution with framebuffer, to safe standard, but no improvement.Lilo was installed to MBR, and had 2 partitions flagged as bootable (/ and /boot).Found nothing on forums or FAQ, but suppose could give change of kernel a shot, but as used what cd started with, that seems unlikely.
View 6 Replies
View Related
Nov 15, 2010
Hello guys, I've just ran 'apt-get dselect-upgrade' to upgrade some packages, there're few packages I want to keep.
However it changed a lot my customized environment like the login screen and the wallpapers.
I really like the previous login screen but how can I change it back?
The option 'Application > Administration > Login screen' is not enabled.
View 1 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
May 12, 2010
I would like to disable the start up sound when Lucid boots up and enters X. I have already unticked:
System, Administration, Login Screen: [ ] Play Login Sound
Yet I still get the login sound.
View 8 Replies
View Related
Aug 12, 2010
Occasionally Lucid boots to what I can only describe as a command line desktop-ie the whole screen is like a terminal, theres no GUI, have to restart by hitting the power button. Is there anyway I can stop it, or start the GUI from there?
View 4 Replies
View Related
May 11, 2010
I just upgraded from Karmic to Lucid and my system will no longer boot. The upgrade completed without any error messages, but upon reboot, it hangs at the loading screen. I cannot start the system in recovery mode either. Same issue happens. To get to the command line, I've appended:
init=/bin/bash
to the kernel line in grub. I then remount so I have r/w access.
It appears to be an issue with udev. While the loading screen is "loading," udevd_work scrolls a bunch of stuff that's too fast for me to read (nor can I copy and paste it).
/var/log/udev isn't showing any recent errors, only messages from before the upgrade.
View 3 Replies
View Related
Aug 7, 2011
I installed lucid lynx over a year ago on a IBM A20m laptop. I've been happily using ubuntu up to now until yesterday when I installed Tor and Torbutton. When I rebooted, I got a blank screen after the IBM startup routine. Thinking that somehow the system got corrupted by my Tor installation, I decided to reinstall lucid lynx from the CD. Surprise! The install CD also gives a blank screen!
I hit a key to get the menu and and the three first three choices all result in the same blank screen:
* Try Ubuntu without installing
* Install Ubuntu
* Check disk for defects
To help debug this, I tried setting the F6 option nomodeset and I removed "quiet splash" from the boot options.
View 1 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
May 24, 2010
I installed 64 bit Lucid Lynx last week. There were some issues with the grub boot manager and my windows boot manager. However, about half the time i would boot to reach only a login prompt. If i used CTRL ALT DEL i would then reboot usually into the GUI.So now i only reach a login prompt all the time. How do i get the the GUI to run automatically?
View 4 Replies
View Related
Jun 18, 2011
I recently learned that you can upgrade your version without downloading and burning a cd. So I upgraded from 10.04 to 11.04 and now can not use my computer. It will boot up display the log in screen and I can log in. But when it loads up as soon as I try and do anything the computer will completely freeze. I am not really sure what is going on. I do have a somewhat older machine but I have above the minimum requirements to run 11.04 so I was wondering if anyone else has had this problem. Also I can easily boot into the 10.04 cd so I would like to know the path to back up all my documents and photos just in case I need to reinstall the older os.
View 2 Replies
View Related
Feb 21, 2011
I decided to dual boot install Ubuntu with my Windows 7. After a lot of hair pulling, i finally managed to boot the live cd environment with "nomodeset". From there i installed ubuntu. When it finished installing, i booted to the new ubuntu install only to be presented with a command line login. If i change the boot line from "quiet splash" to "nomodeset", i can coax ubuntu to boot in low graphics mode. However this is not a permanent fix, and doing so causes a 2 inch offest of the screen on the right hand side. Only the have the missing 2 inches appear on the left side. If from the "Ubuntu is running in low graphics mode" message, i select "console login", and type "startx" i just comes out with "X Server Fatal error- No Screens found". I also tried:
Code:
But it still didn't help. I'm running out if ideas here, can anyone point me in the right direction?
This is a cd that i got free from Canonical themselves. It's Ubuntu 10.04 LTS, and I have Intel Integrated Graphics.
View 1 Replies
View Related
Apr 10, 2011
After updating my system to kernel 2.6.35-28 via the update manager my system now boots to a sever tty terminal and asks to log in. Once I log in and type start x at the prompt the system will load the sign in screen and all is well. I downloaded a boot info script from here
Code:
http://bootinfoscript.sourceforge.net/
This produces a results text on the desktop
[code]....
View 6 Replies
View Related
Mar 6, 2010
Ubuntu has stopped booting correctly. Now it shows the Ubuntu logo and then, instead of GDM, it shows a console login prompt. How do I go about troubleshooting this?'m in Windows XP (which I like a lot better than Ubuntu, because it actually works) but all my files and work are on my Linux partition.
View 9 Replies
View Related
Feb 25, 2011
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies
View Related
