Ubuntu Installation :: Lucid (monitor Switches To Standby) - Screen Goes Black With A Flashing Cursor Then Changes Back To Purple
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
ADVERTISEMENT
Jan 21, 2010
I have just wiped my whole hard drive to install a fresh copy of Ubuntu on it, and now as soon as i power it up it passes the POST screen and black screen shows up with a flashing cursor. I bliv it should say no operating system and pick the USB which has Ubuntu installation on it.I have formated the hard drive to NTFS, the system is Samsung NC10.
View 9 Replies
View Related
May 28, 2010
I recently installed Ubuntu 10.04 on my Aspire One netbook, but everytime while booting, I am stuck at a blank screen with a blinking cursor. I've tried reinstalling but to no help. I've also tried installing 9.10, which will boot, then upgrading to 10.04 which then produces the same problem.
View 5 Replies
View Related
Jan 29, 2011
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
View 9 Replies
View Related
Dec 17, 2009
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
View 8 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Apr 23, 2010
As the topic says. I'm having problem after problem, everytime I figure out a way to take a step forward, my PC has pre-emptively taken a step back.
I'm unable to boot to X or (recovery mode).
I did try booting to a LiveUSB in order to run update-grub, but then it occured I have no idea how to do this from a LiveUSB that will affect the internal HDD installation?
So I'm currently trying to reboot from Live USB, but that just seems to have locked up the PC on the white ubuntu logo. I'm afraid to hard reset it (been doing too much of that lately). How long should a Live USB take to shutdown? (been about 10 minutes so far ). It's not a persistent LiveUSB as far as I know, and I basically just booted to the desktop and then start the reboot cycle as soon as I realised I didn't know what I wanted to do .
View 8 Replies
View Related
Aug 23, 2010
I have an intel atom board (D410PT) and I can run livecds, liveusbs and even boot a grub4dos stick without issue, but install any 10.4 ubuntu variant and all I get is a black flashing cursor.It appears as if there is a grub2 incompatibility with this board, which is currently preventing me running a full ubuntu on it.I tried struggling on with a liveusb system with a rw partition but it's just not feasable for a home server as the lack of swap just bogs the machine down all the time.Grub-legacy no longer appears to be in the repos and neither does lilo (yeah, I really am that old-school that I could cope with lilo if necessary).What can be done about a system that doesn't like grub2? (syslinux is fine, but requires fat32, grub4dos works but doesn't like ext3/4, isolinux works but I don't want livecd, I want full install!)
View 3 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Aug 7, 2010
I have a desktop with AMD Sempron 3000+, 1.2GB RAM, VIA S3G Unichrome Pro IGP, VIA SATA RAID controller based disks, PS/2 mouse and keyboard running Windows XP. Wanted to move to years ago favourite (linux based systems), I downloaded Ubuntu 10.04 for i386 and am trying to install both using CD as well as USB. After the Ubuntu start-up menu for installation, I select install Ubuntu option, turn off 'quiet' so that I can see what happens. The screen goes blank dark with a flashing cursor at the top.
In the kernel messages, the see that it has detected the processor, set the clock, assigned the PS/2 keyboard to input3 and then says:
[1.911624] isapnp: no plug and play device found
After this, the system hangs. Keyboard doesn't work.
View 9 Replies
View Related
Apr 3, 2011
when I install them all goes well but when I get into the GUIs I can hardly press anything - major bug with mouse and it is really annoying. Secondly there is a big gap between the GUI and my screen's edge. Hmm, I think - it must be a problem with the GPU driver and that might be the thing also messing with the mouse clicks. I download the drivers provided by the Ubuntu community - all goes well and I restart - stuck at purple screen after the "moving dots" on boot. So I reinstall the whole OS and try with the drivers provided by NVIDIA - same thing. I try the same procedure with Kubuntu and no progress.
View 2 Replies
View Related
May 11, 2011
If you had or have a black screen or purple screen problem in Natty, add support by subscribing to this Launch Pad Bug: Xorg's HAL causes Purple Screen or Black Screen on GDM startup. [URL]
Through helping people with these problems in the Ubuntu Support Forum (Installations and Upgrades) and through this sticky: [URL] this bug (above) seems to be where this problem is originating. It affects this problem with all video hardware types. As I said in this bug report: "Normal users should not have to be highly skilled "techies" to manually bypass a broken part of a system to make a released distribution work during an install or distribution upgrade"
View 1 Replies
View Related
Feb 1, 2011
I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.
When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.
With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?
View 9 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
May 1, 2010
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies
View Related
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
Mar 7, 2010
When I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
View 9 Replies
View Related
Dec 15, 2010
I installed Ubuntu 32-bit v. 10.10 on a Dell Optiplex GX270, after installation i had to reboot, but then when rebooting it just goes to a black screen with a flashing
View 1 Replies
View Related
Jun 12, 2010
I have a problem, so I boot in recovery mode. The Recovery Mode menu comes up, but when I press a cursor key, the purple Ubuntu screen comes up. I cannot get to the menu items that I need!
The recovery mode is supposed to provide a failsafe text-only environment.
Does anyone know what app puts up the purple screen?
I would really like to remove it. I tried to install xdm, which I prefer, but keep running into the purple screen. - With XDM installed, the purple screen comes up and blocks you from seeing anything. Fortunately, remote login by RDP still works. - If you switch console (CTRL+ALT+Fn) back and forth a few times, the purple screen appears again. You have to go to a new console (F8 or even F9 instead of F7) and begin a new Gnome session. Eventually you run out of function keys...
Perhaps I'm using the wrong distribution. Ubuntu is friendly, but you pretty much have to use it exactly as it installs. Can someone recommend a distribution that puts more emphasis on stability?
View 1 Replies
View Related
Mar 21, 2010
I can't get Ubuntu 9.10 to install... I downloaded ISO image from official web, Then I burn it on blank CD-R using lowest speed available from Nero 6, After that I go to BIOS and change that CD-ROM will boot first; Done. After that i reboot with CD-R, and it boots! Yea!, I press "Install Ubuntu", it goes to black screen with flashing Ubuntu logo at middle of it, After 1-2 minutes i turns black, ouch!, I press "Enter", and there is a error message, something like this...
[Code]...
View 3 Replies
View Related
May 4, 2011
Despite being warned from a friend of mine who works for Intel that the new version of Ubuntu 11.04 sucked? I upgraded from 10.10 which worked perfectly fine and did everything that I wanted it to except work with my COBY MP3 player which is what I hoped 11.04 would do. It all worked great until I rebooted. I previously had the main screen on the left where all of the menus are and the right screen was the 2nd monitor.
Once it rebooted it let me login and loaded the desktop but the main screen is now on the right with that stupid application bar going up the side, all of my folders, etc. are all there but NOTHING is clickable, even the icons up in the right corner where you logout, etc. will not do anything other than highlight that you have clicked on them, the hard drive light flickers for a few moments then nothing.
Also the left hand screen is completely blank unless I move the mouse cursor through it. If I just leave the computer sitting there eventually the screens go dark and the monitor lights start flashing like it is supposed to but if I wiggle the mouse the screens come back on and the mouse is there but there is no login prompt to let me log back in. Pardon my French but this OS is a piece of <bleep> and sucks just like I was told.
View 4 Replies
View Related
May 12, 2010
i thought i would give ubuntu 10.04 a try. So i downloaded the iso twice from two differant sources and burned to 2 diff dvd with diff burners and get the same problem. When i boot off of the disk i get the menu but whether i choose install are run live cd it just sits there for a sec are 2 then goes to black screen with flashing white bar in upper left hand corner and thats all it does. even tried my 9.10 disc which i know works. but it does the exact same. I have purchased a new video card since i last ran ubuntu and its the nvidia gtx 260 core 216. would that be whats causing my problems?
View 1 Replies
View Related
Jul 1, 2010
Im running netbook remix on a eeepc 1005ha. It is my only OS and Im loving it except for one obnoxious quirk. It randomly cuts text and randomly pastes it. If there is something in the clipboard, it will usually paste that, but just as often it will cut random text and paste that. The pastes occur when the cursor focus jumps back to the location of the cursor on the screen. I dont know a better way to phrase that, but thats what it is doing. Say... I put the cursor over the word "pastes" in the paragraph above... even though Im typing in this paragraph, the focus will "jump" to the cursors physical locale (the word "pastes") and then paste whatever is in the clipboard. If the cursor is outside of the textbox, the page will jump to the bottom.
This behavior occurs across programs and in any place text can be entered. I can find no rhyme or reason for it... it just... happens. Sometimes even when Im away from my computer, so its not like Im hitting some key on accident. I have loved everything about this ubuntu distro, but this issue is just toany obnoxious. Writing psych papers on this thing is going to be near impossible if I dont get this fixed before I go back to school.
View 9 Replies
View Related
Feb 26, 2011
I have installed Maverick onto an INTENSO 320GB USB Hard Disk. I can boot from GRUB, but only get a dark grey screen, with no cursor. I have tried editing the boot script, removing "quiet & splash" and putting in "nomodeset". I have also tried "i915.modeset=1" and "i915.modeset=0". Also "xforcevesa" and "nouveau.modeset=0". None have worked. I have not been able to reach a console screen to log in. Here are the specifications of the machine:
[Code]....
Are the number of spaces between "ro" and "quiet and splash" essential? There are three spaces on the boot script and I have left them there. Ubuntu works fine as a live CD, and I experienced no problems with the installation.
View 9 Replies
View Related
Mar 17, 2011
I am trying to do a dual boot of XP and ubuntu. I have 3 hard drives and I plan to put ubuntu on one of them. I have created a DVD from the ISO for 10.10 using programs and methods recommended by ubuntu, and it burned correctly onto the DVD. When I boot with the dvd in the tray the computer says something about linux iso then the screen goes black with a Human=Keyboard symbol at the bottom for a few seconds. Then my screen goes black with a blinking cursor in the top left of the screen. I have let it sit for a while and the PC shows no signs of drives working.Also if I remove it the PC automatically boots to windows.
View 5 Replies
View Related
Mar 21, 2010
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
View 1 Replies
View Related
Feb 7, 2011
Running 10.04 as the only OS on a HP desktop - been running fine for months. Did an update - probably hadn't done one for a couple of months - may be a red herring. The system appeared to crash while inactive. Trying to boot - I get the Ubuntu 10.04 screen for a short while then it goes to blank screen with a flashing cursor at the top - occasionally it will give me an error that /home is not ready - skip or manual fix. I have sda1 = ext4 root
sda2 = swap
sda3 = ext4 home
sdb1 = ntfs
I removed sdb1 from fstab as initially it was complaining about this drive not being ready. The error switched to complaining about /home. I am able to mount both of those filesystems with no problem manually. I ran mke3fs on /home (I forgot the -n parameter! but no problem as I have good backups) - same error - complains about /home not being available at boot even though I can always manually mount it from live cd or manual recovery. I can rebuild this system - and I may as it was upgraded from 9.10 - I may do a fresh 10.04, but I would like to fix the boot problem in case something like this happens again when I actually care about fixing it.I recreated the grub2 configs - I don't have the command to hand, something like: sudo update-grub --root-directory=/mnt/boot/grub /dev/sda
View 5 Replies
View Related
Jul 4, 2010
When I try to start Fedora 12 all I get is a flashing cursor on thep LHS of my screen.This is new. Fedora 12 workd fine up until yesterday.treat me as a novice and if you start using technical terms I will just be lost
View 1 Replies
View Related
Jan 26, 2011
I just got offshore and was trying to extract csv files with new software and the toughbook went crazy. When i try to boot it up it ends up with the black screen and flashing white x in the middle of the screen.Luckily the company have a back up to do the job but would like to try to resolve it on the rig rather than send it back to Germany
View 1 Replies
View Related
