Ubuntu :: 11.04 Boots To Black Screen
Jun 27, 2011
I just set up a ubuntu 11.04 Desktop 32-bit installation on an older pc that I found in the basement. It was running xp before and had 2 hard drives so I left the xp install alone and installed ubuntu on the second hard drive. It all booted up and worked fine until I rebooted it for the 2nd or 3rd time, now after I select ubuntu from grub it just loads to a black screen. Even in recovery mode if flashes the text across the screen and then also goes to a black screen. Now what seemed really wierd is that the same thing occurs if I try to boot from the usb drive i used to install it the first time, but win xp boots fine.
View 2 Replies
ADVERTISEMENT
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jun 20, 2010
So I've been using Ubuntu for about a month now. Everything is great and all but today when I booted into Ubuntu everything was going well--the splash screen appeared and the dots were doing their thing and all--but then there was just a blank screen. Some people have had this problem after a fresh install of Lucid, but its been working for a while so I don't get why it isn't working... I didn't do anything to the system except run some updates before I turned off the computer.
View 9 Replies
View Related
Jul 17, 2010
after spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies
View Related
Jan 5, 2011
It's my first time trying to install Ubuntu. My problem is that booting from USB stick or trying to run "install to drive" both result in a black screen. Here are my specs:
HP EliteBook 8440p Intel Core i5 M520 @ 2.40 GHz NVIDIA NVS 3100M
Ubuntu 10.10 64-bit deployed to USB stick using Universal USB Installer 1.8.2.2.Searching around seems the problem is the way Nvidia graphics card is handled. I found a recommendation to set 'nosetmode' option, but found no easy way to do this on the current USB boot menu.Currently tried pressing TAB on the boot menu option and adding '--nosetmode' to command line, but result is the same.Does anyone have any suggestion about what I should try next?
View 3 Replies
View Related
May 11, 2010
I downloaded and burned Ubuntu from ubuntu.com (64bit version) while in windows 7 64 i popped the install disc in, and it went into a setup in which it installed it asked to reboot, and I allowed. upon reboot boot I could choose either Windows or Ubuntu, so I picked ubuntu and off it went. It started to boot into the (Ubuntu) OS, it shows the little ubuntu thing, then the display goes black, like there is no signal to the monitor. The PC still runs, and reconizes when I plug in an iPhone or something, there is just a black screen though. I would like to know how to go about fixing this?
View 3 Replies
View Related
Apr 29, 2011
I upgraded from 10.10 to 11.04 and after the upgrade
- the system boots,
- the grub menu appears,
- the splash screen comes up and then
- I have a black screen and that's it!
I saw, at the end of the installation process, that the driver for the nVidia video card was removed.
View 9 Replies
View Related
Jun 10, 2011
I was following a lesson with my UNIX Academy training and by mistake made a change to inittab. now it boots into black screen. How can I get into shell to fix inittab
View 2 Replies
View Related
Oct 2, 2010
Well, it's a long story, but to make it short I foolishly upgraded my wife's netbook many months ago to 10.04, not knowing that the new xserver version will cause me lots of grief with the gma500 driver. Back then, I ran an update that completely borked my system, and my only fix was to do another clean install. Since the, I just did not do any more upgrades.
So, months have gone by, and the netbook has not had any upgrades. I've read some instructions in the gma500 megathread on how to safely upgrade the system. To start, I had to purge the psb-kernel-source, do upgrades, and reinstall the psb-kernel-source and the other poulsbo drivers. I did all that, and now it boots to a black screen. I can't ctrl-alt-f1 to a terminal session either.
I really don't want to do another clean install. With the crappy broadcom driver as well, it's a real chore. And because of the crappy broadcom driver, I can't figure any way to get a wifi connection from the command line either.
View 9 Replies
View Related
Jun 18, 2011
I am booting XP and Opensuse 11.4 all was ok until I changed my old monitor for a widescreen monitor, Xp works ok but when I select Opensuse from the menu it just boots to a black screen.
View 3 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
Oct 7, 2010
I am been trying to install Ubuntu 10.04.1 x86 for 4 days now.I have installed and reinstalled over two dozen times.I have tried 3 different live cds. I have tried usb install with both the x86 and with the x86 alternate cd.
I can boot the live cd just fine. However when I try to install, it goes though the entire process and seems to have worked. It then boots to a black screen.I have searched and searched without avail for a solution to this problem.I forget everything I have tried or I would list it all here.I should mention that I am a linux noob.
View 9 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Nov 24, 2010
I've got a desktop 10.04 LTS installation working nicely, and leave it logged in processing things for me. I log in remotely and don't always leave the screen plugged into the computer. Trouble is when I reboot it without the screen plugged in it will sometimes boot to a command prompt.If I turn it off, plug in the screen and turn it on again I get into the GUI as normal. I can't see any settings to change this behavior - what am I missing?
View 1 Replies
View Related
Mar 1, 2011
Something plagues my Ubuntu box since I upgraded to Ubuntu 10.10 - I end up with a blank screen while booting. I use an Asus F81SE Notebook, and Dual Boot with Windows XP. Everything worked fine with Ubuntu 10.04.
When I start my notebook after the upgrade to Ubuntu 10.10, I come to Grub, and when I select the latest kernel available, the hard disk LED blinks for a second, turns off ... and nothing happens any more. There is just a blinking text cursor.
As I upgraded from the previous Ubuntu version, there was an older kernel left (2.6.32-26-generic), which boots up fine.
I run 64 Bit on an Intel T4200 CPU. Booting the Live CD brings me to the purple screen with the open source logo at the bottom. I tried 32 Bit and 64 Bit versions of Ubuntu 10.10.
I don't seem to find similar problems on this forum. But does anyone know how to find the mistake?
View 9 Replies
View Related
Apr 10, 2011
I installed Lucid Lynx to a Gateway Solo Pro 9300(600 Mhz/224 M) and everything looked normal on the display with cursor,icons and abatross background. I rebooted and I have a blank screen with only a cursor showing. I don't think it is a video card problem because I had a normal display upon installation. Is there a way, on boot, to get into a diagnostic mode? what should I look for in the diagnostic mode?
View 4 Replies
View Related
Feb 9, 2010
php pavilion ze4900 was workign perfectly then i installed some navidia driver thing ( wich wasnt for my cp) and then when i restarted it went blank.
View 7 Replies
View Related
Mar 16, 2010
Don't know if this is a coincidence, but the other day we had a power cut and my laptop went off. When I tried to reboot it got to the ubuntu start up screen, but when it tries to get to the "desk top" screen it all goes blue and black flashes. I have XP and Vista on the same machine and these both start up ok
View 2 Replies
View Related
Apr 25, 2010
About 1/2 - 3/4 of the times I boot my PC to 10.04 RC, It quickly goes into a white screen at the beginning and then just hangs there. I updated from 9.1 and it did this, then I fresh installed and had same issue, including when I tried to boot of the 10.04RC boot CD (before 10.04 was even installed). There is nothing listed under sys/admin/hardware. In all cases, I have to hold power button, and keep rebooting...eventually, it will boot normally. I had no problems in 9.04 (nor on XP which I had on the system originally). I do not have a dual boot system, only ubuntu. I have ATI x1900 video AMD 64 X2 dual core 4200 Asus MSI motherboard 2gig ram 250 gig WD HD
View 8 Replies
View Related
Mar 19, 2011
I have a Ubuntu 10.10 system that I haven't been using in a while. Upon turning it on, it boots to a stripped down login screen (not the usual nice one) with a warning about power configuration. When I try to login it flashes a terminal and then reverts back to the login screen. I recorded a quick video if it helps: [URL].
View 2 Replies
View Related
May 2, 2010
I upgraded from 9.10 yesterday, overall, I do like this; but, it has issues:Sometimes, it boots to a login screen, no graphics. I must reboot; then,I do get the graphical login screen.My graphics is an integrated nVidia GeForce 6100. nForce 405.When I look to download more drivers, I see Hardware Drivers jockey-gtk,
and nVidia Binary X.Org driver 185 are installed. I suspect the graphics drivers to be the issue.I see the option to install X.Org driver 173, and 96 for older cards. Is my card that old?My desktop: x64 with 1 gig of RAM.Lucid also boots slower than Karmic, could this be the nVidia driver as well?
View 3 Replies
View Related
Oct 1, 2010
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies
View Related
Jun 25, 2011
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Nov 30, 2010
I have Ubuntu 10.04 running kernel .26 installed on my Dell Dimension 2350 with 512mb of memory. The problem I have been having is, When I am using the computer mostly Internet stuff for no reason the monitor will go black then on the screen it will be at a terminal screen, kind of like when you start up the computer, I don't remember what is all on it but the last thing in the list was: checking battery state: OK after that the screen will flash in multiple colors and then it goes into a loop of just black screen than a colorful flash and back over to a black screen. the only way I can fix that is by holding down the power button. this will happen mostly on face-book on the games and just on the profile page, but it does happen just checking my gmail or play solitaire it does this around 4-8 times a day.
View 3 Replies
View Related
May 16, 2011
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies
View Related
