I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 RepliesThis problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
[Code]....
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View RelatedI have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies View RelatedMy last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies View RelatedI've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies View RelatedI have a few machines set up and running Red Hat 4.1.2-42 in a computer lab. I also have a single test machine running the same version. The machines in the lab work flawlessly.However, when machines are on the login screen, they don't go into power saving mode. That is, after a certain amount of inactivity, the idle login screen should be replaced by a black power saving screen. But this does not happen. The monitor should go into standby (the little green light becomes orange, and the whole screen shuts down until you move your mouse again...you know the drill).I know this is supposed to be the case because this works on the test machine. It just doesn't work in the lab. I think it has something to do with gdm, but I can't for the life of me figure it out.
View 1 Replies View RelatedI installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP.During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost.I removed all "zend-server" like stuff from "Add Remove Software" screen.
Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php)via terminal. Apache installed correctly and started workeing again ok on localhost.n again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".I shut down my pc thinking everything is ok now.
Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me baloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore.I remember one thing thating reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?
So, I just installed Fedora yesterday. I have been trying out different Linux distros and Fedora was next after Ubuntu and SuSE failed severely. So, I installed F14 yesterday and everything has been great... until I tried to set my JAVA_HOME variable. I followed the instructions here.
After editing $ vi ~/.bash_profile as the site instructs, I proceeded to log-out and log back in...except I can't log back in. I have repeatedly gotten the login screen, selected my account, and entered my password. When I enter my password incorrectly, it says 'Validation Error' and that is not what is occurring. The display goes black for a couple of seconds and I am redirected back to the log in screen.
I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.
View 7 Replies View RelatedI had a fully working Nvidia driver setup in FC 12 with no problems using an old LG monitor (LCD panel) on a VGA connection. I have just replaced the monitor with a newer Dell model that has a DVI connection. I plugged it in and got nice Post Screen, FC 12 boot progress display but when it got to displaying the login screen it went black.
Ctrl +Alt+F2 took me to a command prompt where I can type commands no problem. If I change the driver to the Nouveau (and Chattr +a the xorg.conf file) I get a lovely gui. So far nothing I have tried has let me use the Nvidia driver. I have searched around Google and tried nvidia-xconfig, system-config-display, livna-config-display xrandr (which fails to work at all) but so far I have got no where.
I have been trying to fix this for some time, on and off, and have been unable to, I have also ben unable to find a solution in the forums.I have installed openSUSE11.2 GNOME on a laptop, the install went fine, and it runs great, except for two problems:When I start up the splash screen doesn't show (this isn't really important, and I am happy to watch as everything is loaded)When I shutdown/reboot the computer freezes and I have to use the power button to switch off.This doesn't happen every time I shutdown, but most of the time.The freeze happens at different points of shutdown, so I don't know where to find what is causing the problem.As I mentioned point 1 is not really important, although I would like to know why this is happening, but problem 2 is very important.
View 9 Replies View RelatedI have an 80GB HDD where I installed Windows XP first and then Ubuntu. The thing is that whenever I shut down my computer and then turn it back on (wether it's right away or a few hours later, or the next day), I get the GRUB screen where you have to choose Ubuntu, but after that just a completely black screen. I then have to force a shutdown, then turn it back on, and it works. Whenever I restart it works too, this seems to happen only after a shutdown.
Specs:
Dell Dimension 4600
P4 2.8 GHz procesor
2GB RAM
ATI Radeon x1650 video card
80GB HDD
I'm use ubuntu 8.10 ( on a msi 645 notebook ) and i'm trying to shutdown from grub. I have add these entries to menu.lst after the ### END AUTOMAGIC KERNEL LIST
title Halt
halt
I only get a black screen but the pc is still running someone said it only put grub to sleep or something. I also tried this commands sudo shutdown -h now or init 0, poweroff... but there all "unrecognized commands" in grub... Is there a possibilty to shutdown from grub.
When i use the shutdown-command in the terminal as root, it nearly works. It starts to shut down, and it looks like all programs and the kernels shuts down. I end up with a black screen, sometimes with the ubuntu-logo on, but it never powers off. I have to force it off by holding the power button. When i use the graphical interface to shut it down, it works perfectly. The poweroff-command works without problem too.
Here is the command i use:
Code:
So my problem is I recently upgraded my Graphics driver and shut down to log in to windows (yes i dual boot) About 10-15 min later i went to log ubuntu the splash/loading screen what ever you call it worked normally but on reaching the point where one would login I was presented with a Blank screen. Ctrl-alt-f1 also presents me with a blank screen.
View 2 Replies View RelatedI've been using Ubuntu 10.10 for a while it is so great But for the first time, I've booted my laptop on battery power instead of AC power. I have a black screen on the gnome login and i can hear the ubuntu sound. If i press CTRL+ALT+F2 the screen switch from black to the login (terminal version). The problem only appear when i boot from battery power...if i boot from AC power everything is fine !!! I can see the gnome login page. in fact i've reinstalled ubuntu same problem. I think it's a bug with the release. My laptop is a HP TX2000.
View 9 Replies View RelatedI downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View RelatedI just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedUbuntu 9.10, x64. Around 30-40%of the time, after i login, I just get a totally black screen. If i leave it for a few minutes, nothing seems to happen. Whether or not i get login seems fairly random, and I don't notice if there is any common factor- This is always from a clean boot, and i could be on power, or not on power.This is on a HP 6730b, so the video should be a Intel GMA 4500.
View 1 Replies View RelatedI tried to install Ubuntu 9.10 on one of them by default installation. For the moment there is only one user declared. The installation seems OK, except that Ubuntu didn't find my PPPoE connexion. When I logged in, I got a blank screen with the mouse cursor (it moved, but when I left or right-clicked nothing happened) and on the left something looking like two 1-pixel wide menus, as if the system had understood there were a dual screen. These menus could roll and unroll, and I think I even once managed to shutdown by going to the last invisible item thanks to the keyboard arrows (I'm not sure, because I had also clicked on ctrl+alt+suppr, so it could be a delayed effect of that).
I restarted the computer several times, to get no more than that. When I'm in Gnome safe, everything is OK but I don't have any root privilege there (I guess it's normal): for instance, I can't set up the internet connexion. My 20" 4/3 Philips screen is recognized. Then I changed the screen frequency: it's still OK for Gnome safe session, but now, in the Gnome normal session, instead of a black screen with 1-pixel wide menu, I get a black background picture with white light coming from above and reflecting to an otherwise invisible floor. The mouse cursor is moving, but this is the only thing which works.
I just Installed Ubuntu on my PC (win XP-pro) using wubi, by downloading the .iso from webpage and burned it to cd. The installation went fine, but when I login the screen goes black. I can still see my mouse pointer and one vertical pixel line of the desktop. Could it be the graphics drivers, if so how can I update/change them, via rebooting in safe mode and using command line?
View 2 Replies View RelatedI get a black screen (with tiny bits of white on opposite corners of the screen) every time after logging into Kubuntu Lucid AMD64. The only thing I can do is move my mouse pointer over that black screen which doesn't go away. I booted into recovery mode and with command prompt typed "startx" to start graphical mode. That resulted in the same black screen. Then I decided to reboot and install Fluxbox via the command prompt under recovery mode. Now, I'm able to view graphically under Fluxbox after selecting it over the default KDE and logging in. But how do I get regular KDE/Kubuntu to work again? I don't know what happened to make it stop working!
View 1 Replies View RelatedI just used a LiveCD to install Ubuntu 11.04 x64 on my HP desktop. I'm not sure what you need to troubleshoot. It has the following specs:
HP Pavilion Media Center m8539f PC
AMD Phenom X4 9550 QC Processor
5gb ram, 750 gb hdd
Came with vista home prem, nothing left of that except the old restore partition, which I have left intact. It had Windows XP installed recently, but that's completely erased. GeForce 9300GE Video Card
Anyway, I want the x64 so that I can have access to my RAM, among other things.
After installation with the LiveCD, it will come on, present me with generic/safe/etc boot options, and then when either safe or generic is chosen, it goes to an (active?) cursor for a few seconds before revving the HD, screen going black, and then... nothing. No indication it is even still powered at all except the light on front.
How to avoid/resolve this problem. after i input user/password the VNC screen will just have a cursor
View 1 Replies View RelatedGot my Slack running on vostro 1310 for a while now. But just Today... first for what ever reason my wifi stopped to work (at boot time) even though interface was up as usual, driver was loaded, supplicant has not been touched etc. So I wired up a LAN cable and the at boot time I saw an information from eth0 that packet length is 0 and cannot be parsed (great no network at all). Tried to investigate the problem on a different machine, and one of the suggestions I've found was to set router to no security and see if wireless will connect. I thought that it would be a good idea to reboot the machine to attach to the rooter at boot time and no eth0,wlan1 tries to connect to the network and then I get a black screen instead of login window
View 4 Replies View Related