Ubuntu Installation :: GRUB Error After Upgraded To 10.10?

Oct 10, 2010

I used wubi to install the dual booting, after I have upgrade from 10.04 to 10.10 when I launch linux it goes direct to grup.

View 4 Replies


ADVERTISEMENT

Ubuntu Installation :: Upgraded 10.04 To 10.10 - Killed Grub?

May 7, 2011

Machine specifics: Win Vista with Ubuntu 10.04 installed via Wubi. Upgraded from 10.04 to 10.10 - killed Grub. Following other posts, I booted off a 10.04 Live CD and ran boot_info_script. The results are below. It's telling me core.img cannot be found - can someone please tell me what to do next (before I blunder on and make things worse!)

[Code]...

View 4 Replies View Related

Ubuntu Installation :: Upgraded Now Can't Boot Windows From Grub?

May 20, 2010

I upgraded to 10.04 but now i can't boot windows 7 from the grub. what can i do?

View 9 Replies View Related

Ubuntu Installation :: Upgraded-Missing Grub-not Booting

Jun 8, 2010

Had v9.x installed alongside Windows XP SP3 install. Have not used it that much since install.
Got the bug to upgrade to v10.

Went through the upgrade process, everything seemed fine.

At the end of the install process asked which dev to install GRUB onto - I selected only one drive, the wrong one of course, and the reboot failed.

Boots up with:

Have LiveCD running now to post. Ran Info_boot Script.sh - results below.

Will reinstalling v10 from Live CD fix this? Will this use Wubi or just go through normal install process? Or is there an easier fix to install GRUB on the correct drive to get the dual boot choice of Windows XP and Ubuntu back.

Naturally I need to get back to Windows ASAP - it's the net gateway and print server for my home/office setup.

Boot Info Summary:

View 9 Replies View Related

Ubuntu Installation :: Upgraded From 10.04 To 10.10 - Stuck At Grub Prompt

Jan 10, 2011

I upgraded my dell inspiron 6000 from ubuntu 10.04 to 10.10 then rebooted and now I am stuck at the grub prompt. I am able to boot from a flash drive and have run the boot script. This laptop did not have a dual boot system on it but it did have windows on it at one time, converted to ubuntu.

View 9 Replies View Related

Ubuntu Installation :: 10.04 LTS Upgraded - Grub Windows XP Starting

May 11, 2011

The Grub Windows XP selection only gets "Starting ..." and then, nothing. Ran boot info (ref. below)

Updated Grub:
$ sudo update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.32-31-generic
Found kernel: /boot/vmlinuz-2.6.32-30-generic
Found kernel: /boot/vmlinuz-2.6.31-23-generic
Found kernel: /boot/vmlinuz-2.6.28-11-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done .....

View 1 Replies View Related

Ubuntu Installation :: Natty Upgraded Now Grub Boots To Memtest?

Apr 29, 2011

The upgrade finished, did a y to reboot and it boots to memtest, no sign of the grub screen at all.

View 2 Replies View Related

Ubuntu Installation :: Only Boot To Grub Rescue When Upgraded (wubi Installed) 10.04 To 10.10?

Oct 11, 2010

Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)

View 4 Replies View Related

Ubuntu Installation :: Grub Error: Unknown Filesystem And Grub Error: No Such Disc

Nov 23, 2010

I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.

Code:

[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.

[code].....

View 5 Replies View Related

Ubuntu Installation :: "Upgraded" To Windows 7 And Now Can't See GRUB And Lucid / Fix It?

May 16, 2010

I'm at my wit's end with Windows this morning. I upgraded to Lucid a few days ago. Everything went very smoothly. Then I spent the greater part of Friday and Saturday "upgrading" to Windows 7 from Vista. I chose the "update" option which was only supposed to update to 7 rather than overwrite the entire HD. Now, GRUB doesn't load and I don't see my Linux partition. HOWEVER, it appears as though the partitions are still there! When I look in Winbloze at the HDs, it shows the Windoze HD as the partition size I made it when installing Ubuntu.

Any ideas on how to recover the awesomeness that is Ubuntu from this situation? Or do I need to install it fresh?

View 2 Replies View Related

Ubuntu Installation :: Grub Rescue Mode - Error: Cannot Find A Device For /boot/grub (is /dev Mounted?)

Dec 16, 2010

I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:

[Code]....

View 9 Replies View Related

Fedora Installation :: Upgraded To FC10 - Video - Fatal Server Error: No Screens Found Gotta Go, X Session Getting Corrupt

Jun 13, 2009

I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:

First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.

Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,

View 7 Replies View Related

Ubuntu :: Upgraded To 10.04 And Lost Vista In Grub?

Jul 3, 2010

I am a linux noob and have been searching for a couple months to a fix for my problem but now I just need I have two hard drives. One with vista and the other with ubuntu, storage space, and some other partition. I was dual booting windows and ubuntu jaunty jackalope then one day I decided it would be fun to upgrade to 10.04 so I did. When I tried loading windows from grub it just showed a blinking cursor forever. And while attempting to fix the problem by adding windows to the grub menu.lst file it dissapeared from the grub options.

[Code]...

View 9 Replies View Related

Ubuntu :: Upgraded To 10.04.1 And Get Black Screen After Grub?

Oct 6, 2010

Just upgraded to 10.04.1 today and after I turn on the computer it goes to a screen asking for my username and password. Have tried to input my details but with no success.

I also tried pressing 'ALT-F7', but still no look, just takes me to a black screen with nothing.

View 3 Replies View Related

General :: Dual-boot Upgraded From Ubuntu 8.04 To 10.04 Now GRUB Can't Find -- XP Good?

Mar 7, 2011

I apologize for this being somewhat vague but it happened several months ago and I don't currently have access to the laptop. But here goes anyway:Perfectly working dual-boot system with XP and Ubuntu 8.04. I also think I had installed a different boot loader (or maybe just a GRUB editor?). This was several years ago. I upgraded Ubuntu to 10.04 and I remember it asking me if I wanted to overwrite probably menu.lst. I said no when I should have said yes and now XP still loads fine but neither version of Ubuntu will load at all. I wish I had access to the machine so I could say what the error message is, but I don't and I forget.So I expect that menu.lst is just pointing to the wrong place but I'm not sure how to fix it. Can I boot from a live CD and edit menu.lst? Just thought about that.No biggie but I cannot screw up the XP aspect since that's major drama.

View 2 Replies View Related

Fedora Installation :: GRUB Error - Error - No Such Disk

Dec 22, 2009

I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:

Code:

This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.

I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.

View 2 Replies View Related

General :: Unable To Boot Windows / Grub Error Saying GRub Loading Stage2 Read Error

Jul 8, 2011

I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.

Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.

Today I got an error saying GRub Loading Stage2 read error.

View 9 Replies View Related

Ubuntu :: 10.04 LTS Upgraded But Showing Error

Nov 7, 2010

i recently upgraded to LTS 10.04 of ubuntu....but after 1 day, itz not opening....some errors are shown....i tried to rectify bt failed....can any1 help me to recover a file.....i just need dat file because it is my project.

View 7 Replies View Related

Ubuntu Installation :: Device Not Found, Grub Rescue, Post-Installation Error

May 19, 2010

I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "

[Code]...

View 3 Replies View Related

Ubuntu Installation :: Lucid: Restoring Grub2 (dual Boot) - Error "error File Not Found Grub Rescue"

Apr 30, 2010

After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.

[Code]...

View 9 Replies View Related

Ubuntu Installation :: GRUB Error 15 ?

Jul 30, 2010

I was trying to remove a Kubuntu usplash image from my dads laptop with "StartUp manager" when I accidently clicked "Restore to default settings". Now I get a "Error 15 blabla" after selecting what to boot from GRUB.

/boot is on a separated partition. "find /grub/stage1" return hd(0,4) so i ran "root (hd0,4)" and "setup (hd0)". The thing is that GRUB is set up fine and it works as it should (the list of OS'es shows up etc..), but when i choose something to boot it gives me the error 15.

View 4 Replies View Related

Ubuntu Installation :: Grub 2.5 Error 18 On 9.04

Nov 2, 2010

I tried installing 9.04 on an older computer and was getting the Error 18 from Grub 2.5, likely because BIOS couldn't access the kernel. So I decided to remove Ubuntu and Grub completely and I'm now back at square one. However, I still very much want to dual-boot with Ubuntu. I was thinking I'd try again with 10.10 because it uses Grub 2 which I hear would probably take care of the problem. is this correct? Am I likely to have better results with Grub 2, or will I probably run into the same problem?

View 3 Replies View Related

Fedora Installation :: 15 Installation Fails With Grub Error - File Not Found

May 24, 2011

Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...

I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)

Installed obviously in part7

After rebooting (successful copied live image on hdd)

Code:

After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue

Typing 'ls' in the rescue grub prompt returns

Code:

Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.

Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)

View 1 Replies View Related

Ubuntu :: Getting Video Error's In Gnome-panel Since Upgraded To Natty / Fix It?

Jul 17, 2011

I have been getting video error's in gnome-panel since I upgraded to Natty. It seems to become transparent on part of it, and my background covers it. I have tried deleting my gnome-panel preference's, to no aval. Does anybody know how to fix this?

View 9 Replies View Related

Installation :: Get The Error Message From The Thread Title:"render Error Detected" After The Grub-menu?

Mar 30, 2010

i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.

View 8 Replies View Related

Software :: GRUB When Cloning Machine - Error: "An Error Occurred During Boot Loader Installation"

Feb 13, 2010

I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.

When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.

View 4 Replies View Related

Ubuntu Installation :: GRUB Won't Load - Error 15 & 17

Jan 10, 2010

So after having performance issues with Karmic in ext4 I decided to install Hardy with ext3. Was blazing fast, epic, I loved it. But I wanted firefox 3.5 & all the other cool stuff Karmic has.. so I decide to install Karmic, but this time with ext3 instead of 4.

First installation: After the installation went fine, no errors while installing or anything. I remove the CD and reboot. "GRUB Loading, please wait.. Error 15" I did my googling, with the live CD to try and figure out a way of fixing this error. No luck. I did find out that the error is caused by the GRUB trying to load form the wrong drive. So I try to boot directly from the Karmic drive, Error 15. Try to boot directly from the Windows drive, Error 17.

This is the first time this has ever happened to me. First time installing Hardy, everything went great. Installing Jaunty, everything went great. Installing Karmic (for the first time) everything went great. Uninstalled Karmic and installed Hardy, everything went great. Uninstalled Hardy to install Karmic = FAIL!. I did a clean install every single time. The OS is being installed (clean) in the same drive.

A 40GB drive for Windows. A 200GB drive for Ubuntu +/home +swap, and a 120GB(FAT32) for storage.

I installed Karmic 3 times, yes.. 3 times. The last time I installed I removed both the 40GB & the 120GB drives. Leaving only the one I was going to use for Ubuntu, the 200GB drive. After the installation I rebooted and Karmic loaded without problems. I'm in Karmic right now and it isn't all sluggish like it was with ext4, guess my old drives aren't good with ext4 *sight*.

But I can't use my Windows drive. When trying to boot directly from it, it gives me "GRUB Error 17" - I have to disconnect the Ubuntu drive to boot into Windows. Quick question: What the **** is going on?

Someone help, please.. I'm tired of this ****.. and if I have to install Karmic one more time, I won't. I'll just give up and disconnect my Ubuntu drive, put it away and let it accumulate dust somewhere, seriously.. Someone help me correct this without having to install the OS again.

The GRUB error is while the GRUB is loading. It doesn't give me the option to select a OS.

View 9 Replies View Related

Ubuntu Installation :: Grub Error 22 On Rebooting

Jan 24, 2010

When he rebooted his Grub gave the error: Grub error 22. He doesn't have internet right now. Know of any fixes? He's booted into a live cd.

View 9 Replies View Related

Ubuntu Installation :: Grub:Error:No Such Device?

Jan 29, 2010

I'm using Kubuntu 9.10 with Ubuntu-desktop installed.I've been using kubuntu for sometime now but i dont know much technical things about it. I have two hard discs (160GB SATA and 80GB PATA).I have just installed Windows XP Professional and then reinstalled grub2 from a live CD. Both OS are on 80GB PATA drive.The Grub menu at boot time has "Windows XP Professional" entry in it. The problem is thatwhen i select that entry, i get an error saying:Quote:Grub:Error:No such device - "a string of letters and numbers"Press any key to continue...When i press any key, it goes back to the grub menu. Kubuntu and Ubuntu work fine.When i go to bios and change my hard disc boot order, grub is bypassed and Windows boots and works good. I dont know much technical things but i think maybe its the problem with Windows entry in grub. (something to do with lines map(hd0,hd1) and map(hd1,hd0) (But i'm nt sure. I just said wat i thought it might be)

View 9 Replies View Related

Ubuntu Installation :: Grub Error: No Such Disk?

May 11, 2010

Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved