I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
I just installed Ubuntu on a separate hard drive alongside Vista, and after restarting, my computer booted to a screen that said, "error: no such device: xxxxx-xxxx-xxxxx-xxxx (I don't remember exact number, if I need them I'll go back and write em down) grub rescue>"
After a bit of searching I found this thread: [URL].. I tried the first part twice which didn't change anything, so I tried the last part which was too fix the vista bootloader, which worked perfectly, and now I can get into at least one operating system. Would anyone please help me get a bootloader working so I can choose between Ubuntu and Vista? Also, is it worth mentioning that right before the computer shut down after installation, I had a huge list of I/O errors?
EDIT: After further searching I read that the I/O errors were commonly because of a faulty cd or it was spinning too fast. I think my problem with that was that it was spinning too fast, it was incredible loud and there was a huge amount of wind coming out of my computer XD. iirc I have to go to the BIOS to change disc speed?
EDIT2: I think all my problems stem from a faulty CD. I remember setting the burning speed too the highest setting when I burnt the live CD, I guess I thought faster was better.
I'm experimenting a bit with my fedora, so I need to enter rescue mode very often. Every time I want to enter rescue mode, I need to insert fedora DVD Is there a way to install rescue mode on my hard drive so I could boot into rescue mode from GRUB?
View 4 Replies View RelatedI'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:
GRUB loading.
Welcome to GRUB!
error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
I already had windows 7 installed on my raid. So I figured that I would install Ubuntu on my 250gb external. I burn it, boot to CD, and tell it to wipe and install the external hdd. After installation it prompts me to take out the CD, then press enter for it to restart. It restarts, gets all the way through and then says:
Error: no such device: f8b79a59-3c13-408a-b332-dd5e9dc37729. Grub rescue>
I am unfamiliar with this issue, and would have looked for a fix on my windows side, but now I am unable to boot into my windows side at all.
I installed Xubuntu 10.04, and it was working somewhat smoothly(little drivers, but I could see and hear). Ran the update(as of 3 hours ago), and started up the machine. Here is what greeted me. Insyde ACPI BIOS Version 1.50.00 Date: 11/01/02 Copyright (c) 2002 Insyde Software, Inc. All Rights Reserved Attempting to boot a Hard Drive... error: no such device: 6a7820b6-708d-4c44-a057-a2aff1467203 grub rescue> I am not too sure how this happened, or what to do. The machine is a Kohjinsha SA1F00B AMD Geode LX 512mb and 80gb Hitachi HD.
View 1 Replies View RelatedI have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
I have recently decided to try out Ubuntu(Lucid Lynx) using wubi. Everything was absolutely superb and realizing that I have a lot to learn and looking forward to it. Everything was fine until I updated and ticked 2 boxes for updating grub and restarted and couldn't boot into anything. I have xp on 80gb 2.6 celeron, and Ubuntu loaded through wubi on 320 gb external hard drive.
error: no such device??????????????????
grub rescue>
It may seem a little slow for me to put to the test your responses, because I will have to disconnect the PC that I am using and use those connections on the 2.6. This one I am using at the moment is 400hz p3.
Have installed ubuntu on a separate partition on single hard disk and system initially worked on a dual boot basis with windows xp. However after installing most recent series of updates computer is failing to boot.
Error message is 'error : no such device : 6937cabe-f115-455b-a248-6f8d46f80682.' prompt showing is 'grub rescue>' am now unable to access either windows or ubuntu.
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
I downloaded wubi to install it on my old desktop which runs windows xp pro. The installation went through and it asked for some updates. After the updates, it rebooted but got stuck to the msg in the topic sentence. I don't have no live cd's for ubuntu and tried to read some earlier threads but they don't make any sense to me as I have no previous knowledge of linux. how to deal with this in a simpler language?
View 2 Replies View RelatedI was dual-booting Ubuntu 11.04 just fine for about the last week but then ran into some issues and decided to reinstall Ubuntu. Now after the install I get this error: error: nu such device: d38af2a9-740e-4d3c-b267-2a3848e5d319 and it goes into the grub rescue command prompt screen. I have tried to reinstall Ubuntu about 6 times now, complete installs. I have tried changing boot priority multiple times. I installed off a thumb drive and left the thumb drive in after install, took it out after install.
View 9 Replies View RelatedI installed Fedora on my pc over Ubuntu and now Grub wont go any further than rescue mode. (Apparently grubs boot folder was on the Ubuntu partition. Now I see why a dedicated boot partition is handy.) I used VMware to install Fedora as im currently out of CDs. VMware is setup to use the Physical HDD for the primary HDD in the VM. (I made sure VMware disabled access to the windows partitions so the guest couldn't access them.)
I am in Windows 7 at the moment and am avoiding rebooting as that will basically lock me out of the only computer I have access to. I tried running the Ubuntu LiveCD to restore grub but dont know how to mount Fedoras LVM partitions. What can I do to repair grub or at least install an MBR that is capable of booting windows? I can boot floppies and cds using VMware but am not sure what to use to fix this.
Fedora LiveCD wont mount any of the partitions to install Grub
Ubuntu LiveCD may work if I can mount the LVM partitions.
when it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
I just upgraded from ubuntu 10.04 to 10.10 on a system dual booted with windows 7. Upon restarting, I get
error: no such device: 95ab97c1-d136-471a-b097-320a545e9bae.
And I'm left at the grub rescue> prompt. I don't have any rescue discs to save me - the only bootable cd I have is windows reinstallation.
Here is a brief history of my problem:
-Ran Windows XP Media Center for most of the life of this HP Pavilion notebook with 2 hard drives, C: and D:, no partitions except the default HP recovery partition
-Yesterday, installed Ubuntu 9.10 through Wubi on D: from an ISO (because the CD drive doesn't work). I assigned it 30gb on D:, which I assume created a 30gb FAT32 partition on this secondary drive.
-Dual booted successfully from Grub between XP and Ubuntu, so I thought, "Mission accomplished" and started making friends with GNOME. Got a pretty good score in Tetris.
-Was asked if I would like to update to the latest Ubuntu (10.04 I think?) which struck me as a good idea. Everything went smoothly until it asked me to reboot.
-Reboot brought me to a command-line that says "grub rescue>" and above it says "error: no such device: e76e00f3-........" (there's more, I can write it out if that helps)
-Rebooted several more times (cause that usually fixes things) but just got back to "error: no such device: ..." and "grub rescue>"
And that's where I am now. I have almost no experience with how Linux (UNIX?) works differently than Windows or how to use the command line. I know that the hard drives are (hd0), (hd1) instead of C: and D: and that everything important seems to start with "sudo" and that's about it. I was going to ease myself into the whole thing gradually, picking up little bits as I go along. But now I'm just stuck in command line limbo and none of my usual troubleshooting strategies apply here, not even yelling rude things about the computer's manufacturer.
Today it happened again: After an apparently trivial update Grub (Grub2) enters rescue mode the next time booting, not displaying any useful help whatsoever at that point. (Remember that at boot time no manual or help pages are available.) I don't know what went wrong, but ... The harddisk or partition in question is now no longer a bootable partition.
I don't want to use much time trying to sort out things, so unless someone may direct me to at better procedure, I am going to save whatever can be saved from the hd and then reinstall debian (in this case: Sqeeze) from scratch. Nothing else has in my experience ever worked before.
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
then my computer starts black window opens error: no such partition grub rescue>
[Code]....
I just installed Ubuntu on a computer but it can't boot, it ends with a greb-rescue error.
What shall I do? Here's my fstab and my sudo blkid. I did an ubuntu side installation with xp.
Le FSTAB
# /etc/fstab: static file system information.
# Use 'blkid -o value -s UUID' to print the universally unique identifier for a device; this may be used with UUID= as a more robust way to name devices that works even if disks are added and removed. See fstab(5).
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=3a307ad3-99a9-4301-8ad0-f601ef9d157c / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=5b3ff501-f07c-4c2e-ac2d-a238b599cbe2 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
SUDO BLKID:
/dev/sda1: LABEL="System" UUID="26AC3F75AC3F3E9D" TYPE="ntfs"
/dev/sda6: UUID="5b3ff501-f07c-4c2e-ac2d-a238b599cbe2" TYPE="swap"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="3a307ad3-99a9-4301-8ad0-f601ef9d157c" TYPE="ext4"
Ubuntu 10.04 was in small slave-disk, and I put other bigger disk same type IDE/ATA.In first start I get message: "no such device....., grub rescue."Anyway, I make installation in this disk and and now after start message is: "error: out of disk, grub rescue.So now I can not use master/XP and no slave/Ubuntu.
View 3 Replies View Relatedjust installed ubuntu 10.10 on my external usb hdd from my 8gb flash drive doing this on a laptop, my primary hdd (internal) is running windows (230gb of 250gb used) so i got an external hdd (2tb) and I decided to install ubuntu on it
[Code]....
I have a netbook that dual-boots Win XP and Ubuntu 10.04 and accidentally hit the Win recovery mode in GRUB today, but quickly restarted without formatting or proceeding with any recovery. But upon reboot I just see: error: no such partition. grub rescue>
What I have tried so far: Boot to USB Live Disk... It won't, just goes straight to grub rescue.I do ls and it gives me (hd0) (hd0,4) (hd0,3) (hd0,2) (hd0,1) (fd0) error: fd0 cannot get C/H/S values.
set gives me
prefix=(hd0,5)/boot/grub
root=hd0,5
but if I try to boot it says unknown command so I figured I needed to find the right partition to boot from but I went through all of them with ls (hd0,4)/boot, ls (hd0,3)/boot etc. and every partition comes back "unknown filesystem".
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedUbuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.