Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
Trying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code: error: out of disk. grub rescue> I tried using following some instructions i found after googling for the problem: Code: ls (displays the partitions and devices Grub can see) set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code: Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub. => Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst. => Windows is installed in the MBR of /dev/sdc
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
My system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
I am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
My desktop has 2 drives: a master (XP) and a slave (which i dlded linux on). the thing is that i dont get to chooose if i want to open up xp or ubuntu when i turn my desktop on. it says grub error: no such disk. Im like screwed if i cant fix this, but i still have my live cd with me.
If I use the super grub disk I can get to my ubuntu partition otherwise my windows partition boots automatically. I spent over an hour in the community documentation using the live cd to reinstall grub and nothing has fixed it. I think that grub is installed and the windows bootloader is just taking precedence.
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got "Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
I just replaced the HD in my computer with a larger one (1tb) and installed Ubuntu Lucid 64bit onto two partitions (100gb for / and the rest for /home). I rebooted and it loaded up fine. Did some stuff, had to restart (NVidia drivers) and it stopped at a GRUB rescue prompt, reporting the error "Error : Out of Disk". So I rebooted again and it worked no problem. But since then, every second bootup or so delivers this error, while other times it loads Ubuntu fine. I've tried running update-grub a few times and this always seems to work. But ultimately, the problem never goes away. I also had a look at this [URL] But it seems the advice given to change the 10_linux file must be only for an earlier version of GRUB2 as the file on my machine is very different.
EDIT: I've attached the output of a Boot Info Script that I got here: [URL]
Edit: This is somewhat inaccurate, please see post #16 on page 2 for my actual situation
I'm more than a little confused by this. A little while back I had to reinstall my machine because I had a hard disk failure and I replaced my primary drive.Everything went perfectly smoothly, but then a couple of weeks after that when I rebooted, it dumped my into the grub rescue console
Code:
error: out of disk. grub rescue>
So, I found a solution to the problem on these forums, rebooted perfectly fine, and thought everything was fine. Until the next time I rebooted, when it happened again. And now, every single time I reboot, I get the same issue.I have to do the following, each and every time I want to reboot - and i'm at a loss to explain why grub is borking itself every time.Boot off a live cd.Open a konsole window
Code:
sudo su - mount /dev/sda6 /mnt mount /dev/sda1 /mnt/boot mount --bind /dev /mnt/dev
what I think will be a long post, but I want to include as much information as possible to get some help. I post my question here because it is mostly a boot issue and not strictly a server issue, although that is what I am trying to install. I bought a used server, motherboard has all IDE connectors for HD and cd/dvd. The board is am Asus cuv4x-d. It is a rather old board, introduced to market around Sept. 2000. The two IDE hard drives that came with the mobo have presented the problem as what I will describe for the SATA problem. I wanted to use my SATA-Hard Drive as my storage. I bought an SATA-to-IDE adapter. I installed the hardware and booted from the Ubuntu Server cd. Everything went fine and the installation smooth. When the initial reboot started, this is where the error comes. I get an error that says, Error: out of disk. The next line shows a grub rescue prompt. It appears that Grub can't be found. The motherboard has a Primary and Secondary IDE connection. I have tried connecting the adapter to both.
So my hard drive crashed. (i was running Linux 10.4)so i put in another hard drive, installed Ubuntu 10.4, and on boot up i get that error. I've tried reinstalling it with the server edition. different hard drives. all I get is that message.
I installed Debian squeeze amd64 (using LVM with ext4 for /, /home, and ext2 for /boot). This is on a whole hdd on its own. Before I installed it, I have win7 on it. There is also another hdd with winxp. The dual boot loader is in the hdd. After I installed Debian, grub 1.98 was installed. After reboot, grub says "welcome", and after 10 seconds, it says "error: no such disk". It went on to display the menu with a choice of my debian and MS windows.
There does not seem to be any effect of this "error:no such disk". However, after I chose Debian to boot, gnome comes on, and I typed in the username and password. The screen goes blank for about 30 seconds before my desk top comes on.
I have 2 questions:
1. How do I fix my grub "error:no such disk" message? 2. Is there something wrong with a 30 seconds delay for the desktop to show after typing username and password, and if so, what can be done?
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
how to login through cmdline in grub.I tried some of codes but failed.codes were-grub>set root=(hd0, grub> linux /vmlinuz root=/dev/(sda, ro error;no such disk
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
Every time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
I have a system running om vmware esxi with suse 9.3 i did an inplace upgrade to 10.2. i got the follwoing error during upgrade error occurred while installing grub (version 0.97) error 21 disk cannot be found. I ignore this error and the upgrade went fine. after a reboot the server works pretty fine. Except one thing GRUB.. i cannot install it on this system. i want to install grub on this system.
I have RAID1.. throgh SATA cable..One of my HDD got failed to detect...hen i chkd other hdd is detecting in BIOS but i couldn't boot.. It says GRUB Hard Disk Error.
I've a dual installation, ubuntu and XP and I've suddenly got a problem when I boot it gives the error "GRUB: Hard Disk Error", Tried to boot from Ubuntu live CD but I don't know how to correct grub from there. How can I correct the problem, maybe which live disk is better to correct such errors?
Consulted similar threads but couldn't find a solution for my problem as I'm booting from livecd and others were giving solution as if one can directly access the installation on hard disk, but whenever I try with ubuntu livecd it access live installation.
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
