General :: Dual-boot Upgraded From Ubuntu 8.04 To 10.04 Now GRUB Can't Find -- XP Good?

Mar 7, 2011

I apologize for this being somewhat vague but it happened several months ago and I don't currently have access to the laptop. But here goes anyway:Perfectly working dual-boot system with XP and Ubuntu 8.04. I also think I had installed a different boot loader (or maybe just a GRUB editor?). This was several years ago. I upgraded Ubuntu to 10.04 and I remember it asking me if I wanted to overwrite probably menu.lst. I said no when I should have said yes and now XP still loads fine but neither version of Ubuntu will load at all. I wish I had access to the machine so I could say what the error message is, but I don't and I forget.So I expect that menu.lst is just pointing to the wrong place but I'm not sure how to fix it. Can I boot from a live CD and edit menu.lst? Just thought about that.No biggie but I cannot screw up the XP aspect since that's major drama.

View 2 Replies


ADVERTISEMENT

Ubuntu Installation :: Upgraded 9.04 To 9.10 Now How To Remove 9.04 And Dual-boot

Jan 16, 2010

I have both 9.04 & 9.10 installed & running with a dual-boot...now I want to remove 9.04 and go to a single-boot of 9.10...how do I do this? I want to reclaim my disk space from the old OS as well...to make matters alittle messier, 9.10 was installed first...then after encountering trouble I installed 9.04 to see if it solved my problem...when I figured out how to solve problem it worked same on both releases...so I now want to remove 9.04 and stay with 9.10...but I don't want the uninstall of 9.04 to impact the 9.10 install...I would also like to adjust the partitions so that I can use all of the disk for 9.10 (including that which was used for 9.04 and it's swap file)..

View 2 Replies View Related

Ubuntu :: Upgraded Dual Boot From 9.10 To 10.04 And No Boot

May 14, 2010

i upgraded ubuntu from 9.10 (pretty sure it was .10...) and now my machine goes through the bios and i get a black screen w/a blinking cursor instead a boot choice to ubuntu or windows 7. system worked fine prior to upgrade... reading lots of things it appears i likely have a problem with grub2 (soemone correct me if i'm off base?) so i've been trying to restore and reinstall grub 2 (using this and silmilar threads: [URL]), got frustrated and reinstalled 10.04 over the upgrade install. same blinking cursor... i did the following from this thread: [URL]

[Code]...

i've gotten that response from trying to reinstall/repair grub 2 also. i'm near wit's end and am near completely wiping hdd and reloadng w7 OS.

View 3 Replies View Related

Ubuntu :: Upgraded - Dual Boot To Vista No Longer Working

Apr 29, 2010

I upgraded today to 10.04, everything went fine and was working fine. I went to boot back into Vista via grub2. I immediatly get the PXE-E61 Media Test Failure, check cable PXE-M0F Exiting PXE ROM

I first checked my boot order, and lan is very last. Also, through Ubuntu I can view everything on the hard drive so it is not that. I think it may have to do with during the update process, it asked about grub2 update preferences and asked about different drives and such (I am not exactly sure what it was called). I didn't select all of the choices, and I believe this may be the cause, as this was the only thing I had control of that I could have screwed up.

View 9 Replies View Related

Ubuntu :: Upgraded Windows Dual Boot/lucid-lost Grub2?

May 8, 2011

i had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).

here's my fdisk:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

[Code]...

View 5 Replies View Related

Ubuntu Installation :: Upgraded Now Can't Boot Windows From Grub?

May 20, 2010

I upgraded to 10.04 but now i can't boot windows 7 from the grub. what can i do?

View 9 Replies View Related

Ubuntu Installation :: Upgraded From Desktop 10.04 To Studio 10.04 And Running A Dual Boot System With Windows?

Nov 3, 2010

I upgraded from Ubuntu Desktop 10.04 to Ubuntu Studio 10.04 and running a dual boot system with Windows. On the grub screen there are four listings now for Ubuntu. Two recover modes and two ubuntu modes. Is this normal? Going to reboot and see if I can get a picture of it.

View 3 Replies View Related

Ubuntu Installation :: Only Boot To Grub Rescue When Upgraded (wubi Installed) 10.04 To 10.10?

Oct 11, 2010

Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)

View 4 Replies View Related

General :: Use GRUB To Manage My Dual-boot Startup On PC?

May 10, 2011

On my PC, I use GRUB to manage my dual-boot startup on my PC. Every time I update my Linux, It adds another 2 startup options on my HD for every distro I have. (The Normal and Recovery modes for the new version.) I would like to add the VortexBox distro someday.

Is there a way for me to get rid of the older versions of Linux distro's on my GRUB menu so I just see the newest? I have 6 options for Ubuntu 10.10 and 4 options for UGE 2.8..

View 3 Replies View Related

General :: Installing Grub On A Dual-boot RAID Config?

Sep 29, 2010

Ive created two RAID0 partitions on my drives, a 500GB and a 60GB. Im trying to install Ubuntu on the smaller partition (ive already put Win 7 on the larger one) and every time when i get right to the last part of installation it says Grub couldnt be installed. "the grub package failed to install in arget......."

View 1 Replies View Related

General :: Setup Grub For A Dual Boot System Of Xp And Vista?

Apr 10, 2010

I want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...

This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial

grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:

mkdir: cannot create directory '/media/hda3/boot': No such file or directory

View 2 Replies View Related

General :: Emergency GRUB Loader CD For 64bit Dual Boot

Aug 9, 2010

Installing upgrade from Open SuSe 10.3 to 11.3. I did it on a 32-bit laptop, aborted half way through and couldn't get back on because GRUB loader was corrupted. No problem as there are lots of 32-bit GRUB loaders available for download, install was successful 2nd time. I need to do the same for a desktop x64bit dual core Intel. Can't find a x64bit GRUB loader on internet - how do I extract from my current set-up an emergency GRUB-loader CD?

View 5 Replies View Related

General :: LILO/GRUB - Dual Boot Half Broken

Jun 26, 2010

I've run Debian on my laptop for quite some time now with no problems. I installed Slack to a new partition created in the free space of my hard drive, and I thik this was my mistake: I let Slack automatically configure the MBR with lilo (can't remember - I should stop operating on the MBR at 4 AM.) Now Slack runs just fine, but upon bootup I would like to be able to boot either Debian or Slack, but instead I just have a Slack splash and the only option is to press enter to boot Slack.

Code:

I believe sda1 is the root directory of my Debian install.

Code:

In the above table, sda10 is the swap I created for Slack and sda3 is the root directory for Slack. All other partitions were there before (my initial Debian install).

Thus my partitions are apparently intact and visible by the MBR (is it correct that the MBR holds the list of partitions on a disk?) but for some reason I don't have the option to boot Debian at all - just Slack.

I have a feeling this is a LILO/GRUB issue, but I don't know where to start.

EDIT: more poking around seems to reveal that it is the configuration of LILO that is the problem. Observe the following output:

Code:

View 4 Replies View Related

General :: Newbie Dual Boot Grub Menu Failure?

May 24, 2010

I'm running a dual-boot with linux mint and Windows. I have an E-machines desktop with : 760 GB Hard Drive 6GB RAM NVidia GeForce Graphics card 6150se Integrated AMD Athalon II X2 235e dual-core processor My problem is getting my grub to boot into Linux Mint, and the problem may lie with my graphics card. Whenever I install the linux mint for the first time, I am prompted to activate my proprietary NVidia graphics driver, which I do. Then I am asked to reboot.

Upon reboot, the system gets to the grub menu, accepts my selection to boot linux mint, then the "progress dots" appear on the screen. After about 8 seconds, the screen switches into command prompt mode. I never get to the graphical sign-on screen. All I get is the console sign-on prompts. From there my only option seems to be to reboot. (sudu reboot). After which, of course, I am forced to go into Windows vs. Linux to avoid the problem. Once Windows has loaded up, I do a restart and go back into Linux Mint . Finally, I get to the Linux sign-on graphical screen.

To summarize, i cannot restart linux mint without getting stuck staring at a console screen. I can get back into linux mint if i use the command 'sudo reboot', and, from the grub menu, choosing to go into Windows. From Windows, I then do a restart and end up back at the grub screen again, but this time when I select linux mint, things work and I am given the sign-on gui.

If I choose to not install the graphics driver (and put up with the annoying reminder to activate one), the system dual boots without a problem.

View 5 Replies View Related

General :: Upsize Partitions On New HDD - Dual Boot (11.04 On Win7 With Grub)

Aug 12, 2011

I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).

I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.

Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.

Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....

View 6 Replies View Related

Ubuntu Installation :: Win 7 Dual Boot - Revert Grub 2 To Grub 1?

Mar 26, 2010

So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?

View 7 Replies View Related

General :: Boot - Error - Couldnt Find Grub ?

Oct 12, 2010

I recently installed ubuntu on an external hdd. i tried turning on my laptop w/o the hdd connected and when it went to boot it gave me an error saying that it couldnt find grub. all i wanted to do was boot into windows 7. is there anyway to set it up so i can just boot off my main hdd for windows and use the bios and choose to boot off my external to boot grub and choose what i want to boot like say linux?

View 3 Replies View Related

General :: Editing Grub.conf To Make Windows Default In Dual Boot?

Mar 31, 2010

I installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):

#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz

[code]....

View 4 Replies View Related

General :: Grub Boot Loader Installation In Dual Boot Machine After Windows 7 Installation?

Mar 23, 2010

I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.

View 4 Replies View Related

Ubuntu :: Grub - Lost My Windows Partition - Can't Find Menu.lst In /boot/grub

Nov 1, 2010

I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.

After "fdisk -l",

I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?

View 24 Replies View Related

Ubuntu Installation :: Grub Rescue Mode - Error: Cannot Find A Device For /boot/grub (is /dev Mounted?)

Dec 16, 2010

I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:

[Code]....

View 9 Replies View Related

Software :: Grub Drops To Grub Prompt On Boot / But Can Use Commands To Find Menu

Jun 5, 2009

I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.

I can run:configfile /grub/menu.lst

and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.

View 7 Replies View Related

Ubuntu Installation :: Dual Boot Using Windows Boot Loader, Not GRUB?

Nov 8, 2010

I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.

I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.

I feel like I'm halfway there, I just need to get Grub to load correctly or something.

View 8 Replies View Related

Ubuntu :: GRUB Boot Menu At The Start Like Any Other Dual-boot System?

Jan 28, 2011

I've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:

- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.

- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.

- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).

This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.

I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.

View 5 Replies View Related

Ubuntu :: Missing Grub And Dual Boot Menu - Windows Won't Boot

Jul 3, 2011

i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:

[URL]

Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.

View 8 Replies View Related

Ubuntu :: Dual Boot XP - 10.10 - Boot Screen Shows Up But Then Computer Restarts And Returns To The GRUB Menu

Dec 16, 2010

I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.

I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst

In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l

And got this:

Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.

I tried to format the table as it appeared, but the forum corrected the extra spaces.

View 7 Replies View Related

Ubuntu :: Grub - Unable To Boot Into Windows 7 On Dual Boot

Mar 23, 2011

I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub

Code:

Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.35-22-generic
Found initrd image: /boot/initrd.img-2.6.35-22-generic

[code]....

View 8 Replies View Related

Ubuntu Installation :: Grub Dual Boot - Cannot Boot Win 7

May 3, 2010

I updated from Ubuntu 9.10 to 10.04 via Ubuntu updater. Worked nicely. Until I had to use Win 7 for a moment, so I went to the Grub boot menu and picked Win 7. Nothing is happening. Just a black screen with blinking underscore to the top left corner. I never had this problem with 9.10, so I am confused. I tried looking around and nothing helped. Be noted that I am an amateur with Ubuntu coding and installing. I did hear that this is already a common issue now.

View 6 Replies View Related

OpenSUSE Hardware :: GRUB To Dual Boot 11.2 And Windows XP But Hangs On Boot

Apr 20, 2010

HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.

But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.

View 9 Replies View Related

Debian :: Grub Boot Loader On A Dual Boot System?

Dec 16, 2010

This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved