After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedI had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
I have been using various versions of Ubuntu for many years. I love it and I want to stay with it. Now I need help more than ever. So basicly I've searched through forums and other sites which seem to have had the same problem I am having.
However, I've tried all the "fixes" and nothing works at all at this point.
Here is what I have tried so far: [url] and every suggestion here: [url]
When I put in "sudo fdisk -l" I get this:
So after trying the suggestions in the above links I would restart and still get: "error: file not found. Grub rescue>"
I am trying to install it from a usb to an external hd. I installed Ubuntu 8.4 on the same hd before and it worked fine however I need one of the newer versions to use the programs I need. I've been at this for hours and maybe I am just missing something simple.
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
I dual booted ubuntu with vista a while back, but I was running out of space on both partitions. So I thought I'd install ubuntu on another slightly smaller HDD from an old laptop. I thought all the ubuntu and grub stuff were on that one partition, so I thought if I just deleted it, all would be good. I isn't. Now when I boot up, I get a message saying 'Error, no such partition exists' and then 'Grub rescue:' and an input. So what I want now, is well, basically to be able to boot windows. I'm guessing I either have to remove grub, or just make it forget I ever had Ubuntu.
View 6 Replies View RelatedI attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
I have had it with the frustration of trying to figure out how to successfully install grub on my own, so I am hitting the forums. What can you tell me about installing grub/grub2 (whichever is best -- I want something that works) to my single hard drive computer. Operating systems: Windows XP, xUbuntu 9.10 Hard drive: Samsung SATA 2, 1 TB Desired result: Menu that loads upon boot so that I can select which OS I would like to load without inserting media device or disk.
I thought this individual had the most straight forward and thorough tutorial (of any I have seen) on the subject but precluded at least one thing for me that I cannot afford to ignore: I don't seem to have a "stage1" that can be loaded by the grub shell. Trying to find it in /boot/grub/stage1 in the grub shell, I get... "Error 15: File not found" What I do have in that directory is 'grubenv'. When I boot up, it loads grub, but it comes up with an error message saying, "File not found". Then, all I get is the 'grub rescue' prompt: "grub rescue>".
Obviously, after spending hours on this thing, this is not the whole story. But there have been so many attempts to try fix it with one thing or another, that I cannot easily relate them all, if I could even remember each one.
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
when it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
I did an upgrade and now getting grub error 15 file not found on boot, memtest runs ok. any help would be appreciated. system information is listed below:
Find /grub/stage1
hd(1,0)
Menu.lst
[code]....
Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :
$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
[code]....
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View RelatedI am reading spc456's thread with the same subject line and trying to work through the thread with suggestions by drs305.
My situation is very similar. It started with a sudden Windows boot problem (still my primary OS):
Quote:
This was only if I selected Windows from the boot menu. I thought I could cure it with the Windows-7 Repair Disk from neosmart.net. This appears to have wiped my Boot partition completely and now I can't boot anything. (I'm using the Ubuntu 10.10 live as I type this.)
I downloaded boot_info_script055.sh and here are the RESULTS but I don't know what needle to look for in that haystack.
Code:
Boot Info Summary:
Well, I see why the Windows boot didn't show up. Looks like 30-OS_prober was failing to find the Windows boot record, which makes sense if the whole blessed (ahem) boot partition has been hosed.
I tried to follow the grub-install instructions:
Code:
But since grub2 is obviously not going to find the Windows boot record, I will continue with drs305's.
Code:
No, I have not mounted /dev. Where would I do that? Against which FS?
In any case, I am now printing the article "How to restore the Ubuntu/XP/Vista/7 bootloader" to see if I can get that going.
To my dismay, I discovered that the disk supplied with my Dell machine is NOT a Windows Installation disk, so no straightforward "fixmbr" command will be possible at this time.
I'll let y'all know how I have fared with this. I am sceptical because it's not merely the master boot record that has gotten corrupted but the whole blessed (have I used that adjective already?) boot partition.
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies View RelatedHave a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
I've had my Ubuntu crash and had to reload it. I;ve reloaded 9.1 and am now getting the error
GRUB loading.
error: file not found
grub rescue>
I have tried a number of solution attempts I've found on the internet with no success.
I have Windows 7 also loaded however I'm not getting a Grub menu only the error above. I seem to have a number of Linux partitions I believe my correct one is on sda7. I had at one stage tried to have a boot partition on sda4.
I have a long running 9.10 installation. All of a sudden, on boot, I get this error: "loading initial ramdisk error: file not found" If I hit 'E' at the menu entry, I can scroll all the way to the end of the boot command, and it appears that the last 'c' on 'generic' is missing from the kernel name. If I add the c and hit ctrl-x it boots fine. The grub.cfg appears to be correct, it has the full generic spelled out.
View 9 Replies View RelatedI just installed Ubuntu 10.4 beta. The installation is fine, but grub2 isn't loading Linux. Instead of booting into the OS, I get the message: No such disk grub rescue >I have two hard drives: /dev/sda and /dev/sdb. Ubuntu is the only OS and is located on /dev/sda1. I ran the "boot info" script and include the results here. One problem I see is that I have grub2 on the MDRs of both /dev/sda and /dev/sdb. BTW: From the Live CD, I can select boot into hard drive and Ubuntu will start up just fine. I can also use "Super Grub" CD and everything loads fine.
View 7 Replies View RelatedI am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
This will make the third time I have tried to load Ubuntu and it has wiped out my Win OS twice and am not sure it hasn't done it again. I installed a 40gb hdd as a slave, have XP on the master. In the process of installing I picked the drive that corresponded to the slave. Didn't understand the the names or titles Ubuntu used but proceeded and the installation went fine although I never saw a place to load Grub on the master drive. After rebooting a couple of times saw the option to click Esc for boot menu but the only choices given were Ubuntu, ubuntu recovery and ubuntu kernel. Can find no mention of my W OS. Have tried to unplug the slave drive but can't boot then as get error message of Grub error.
View 14 Replies View Relatedthen my computer starts black window opens error: no such partition grub rescue>
[Code]....
I just installed Ubuntu on a computer but it can't boot, it ends with a greb-rescue error.
What shall I do? Here's my fstab and my sudo blkid. I did an ubuntu side installation with xp.
Le FSTAB
# /etc/fstab: static file system information.
# Use 'blkid -o value -s UUID' to print the universally unique identifier for a device; this may be used with UUID= as a more robust way to name devices that works even if disks are added and removed. See fstab(5).
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=3a307ad3-99a9-4301-8ad0-f601ef9d157c / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=5b3ff501-f07c-4c2e-ac2d-a238b599cbe2 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
SUDO BLKID:
/dev/sda1: LABEL="System" UUID="26AC3F75AC3F3E9D" TYPE="ntfs"
/dev/sda6: UUID="5b3ff501-f07c-4c2e-ac2d-a238b599cbe2" TYPE="swap"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="3a307ad3-99a9-4301-8ad0-f601ef9d157c" TYPE="ext4"
