I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I just installed Ubuntu on a separate hard drive alongside Vista, and after restarting, my computer booted to a screen that said, "error: no such device: xxxxx-xxxx-xxxxx-xxxx (I don't remember exact number, if I need them I'll go back and write em down) grub rescue>"
After a bit of searching I found this thread: [URL].. I tried the first part twice which didn't change anything, so I tried the last part which was too fix the vista bootloader, which worked perfectly, and now I can get into at least one operating system. Would anyone please help me get a bootloader working so I can choose between Ubuntu and Vista? Also, is it worth mentioning that right before the computer shut down after installation, I had a huge list of I/O errors?
EDIT: After further searching I read that the I/O errors were commonly because of a faulty cd or it was spinning too fast. I think my problem with that was that it was spinning too fast, it was incredible loud and there was a huge amount of wind coming out of my computer XD. iirc I have to go to the BIOS to change disc speed?
EDIT2: I think all my problems stem from a faulty CD. I remember setting the burning speed too the highest setting when I burnt the live CD, I guess I thought faster was better.
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I had Ubuntu installed, i installed Debian and there was no dual boot. So i formated all the hard disk to install only Debian. It installed but at boot i get error: no such device and the grub rescue> prompt. i googled for a solution and nothing worked:
- i tryed reinstalling grub, not worked
- i did the windows cd fixmbr trick, not worked
- reinstalled debian with fixmbr the first step and nothing
- tryed deleting with dd the mbr, not worked
- reinstalled grub from debian rescue, not worked
what should i do? i can't access my computer? please tell me how should i fix it? the google guys will kill me because i put their servers on fire
I already had windows 7 installed on my raid. So I figured that I would install Ubuntu on my 250gb external. I burn it, boot to CD, and tell it to wipe and install the external hdd. After installation it prompts me to take out the CD, then press enter for it to restart. It restarts, gets all the way through and then says:
Error: no such device: f8b79a59-3c13-408a-b332-dd5e9dc37729. Grub rescue>
I am unfamiliar with this issue, and would have looked for a fix on my windows side, but now I am unable to boot into my windows side at all.
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
Have installed ubuntu on a separate partition on single hard disk and system initially worked on a dual boot basis with windows xp. However after installing most recent series of updates computer is failing to boot.
Error message is 'error : no such device : 6937cabe-f115-455b-a248-6f8d46f80682.' prompt showing is 'grub rescue>' am now unable to access either windows or ubuntu.
I was dual-booting Ubuntu 11.04 just fine for about the last week but then ran into some issues and decided to reinstall Ubuntu. Now after the install I get this error: error: nu such device: d38af2a9-740e-4d3c-b267-2a3848e5d319 and it goes into the grub rescue command prompt screen. I have tried to reinstall Ubuntu about 6 times now, complete installs. I have tried changing boot priority multiple times. I installed off a thumb drive and left the thumb drive in after install, took it out after install.
View 9 Replies View RelatedI am reading spc456's thread with the same subject line and trying to work through the thread with suggestions by drs305.
My situation is very similar. It started with a sudden Windows boot problem (still my primary OS):
Quote:
This was only if I selected Windows from the boot menu. I thought I could cure it with the Windows-7 Repair Disk from neosmart.net. This appears to have wiped my Boot partition completely and now I can't boot anything. (I'm using the Ubuntu 10.10 live as I type this.)
I downloaded boot_info_script055.sh and here are the RESULTS but I don't know what needle to look for in that haystack.
Code:
Boot Info Summary:
Well, I see why the Windows boot didn't show up. Looks like 30-OS_prober was failing to find the Windows boot record, which makes sense if the whole blessed (ahem) boot partition has been hosed.
I tried to follow the grub-install instructions:
Code:
But since grub2 is obviously not going to find the Windows boot record, I will continue with drs305's.
Code:
No, I have not mounted /dev. Where would I do that? Against which FS?
In any case, I am now printing the article "How to restore the Ubuntu/XP/Vista/7 bootloader" to see if I can get that going.
To my dismay, I discovered that the disk supplied with my Dell machine is NOT a Windows Installation disk, so no straightforward "fixmbr" command will be possible at this time.
I'll let y'all know how I have fared with this. I am sceptical because it's not merely the master boot record that has gotten corrupted but the whole blessed (have I used that adjective already?) boot partition.
I am new to ubuntu OS, I am having quiet a hard time solving out certain problems. I have Ubuntu 10.10 and Win Xp installed on the same hard drive partition i.e. C drive. Now yesterday accidentally I deleted a folder from C while I was logged in to Windows. Now today when I restarted my pc I got this error message :
error : No partition found
grub rescue>
Then somehow I managed to reinstall the Grub loader. Now whenever I restart my PC I get this error message :
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub>
Here is a brief history of my problem:
-Ran Windows XP Media Center for most of the life of this HP Pavilion notebook with 2 hard drives, C: and D:, no partitions except the default HP recovery partition
-Yesterday, installed Ubuntu 9.10 through Wubi on D: from an ISO (because the CD drive doesn't work). I assigned it 30gb on D:, which I assume created a 30gb FAT32 partition on this secondary drive.
-Dual booted successfully from Grub between XP and Ubuntu, so I thought, "Mission accomplished" and started making friends with GNOME. Got a pretty good score in Tetris.
-Was asked if I would like to update to the latest Ubuntu (10.04 I think?) which struck me as a good idea. Everything went smoothly until it asked me to reboot.
-Reboot brought me to a command-line that says "grub rescue>" and above it says "error: no such device: e76e00f3-........" (there's more, I can write it out if that helps)
-Rebooted several more times (cause that usually fixes things) but just got back to "error: no such device: ..." and "grub rescue>"
And that's where I am now. I have almost no experience with how Linux (UNIX?) works differently than Windows or how to use the command line. I know that the hard drives are (hd0), (hd1) instead of C: and D: and that everything important seems to start with "sudo" and that's about it. I was going to ease myself into the whole thing gradually, picking up little bits as I go along. But now I'm just stuck in command line limbo and none of my usual troubleshooting strategies apply here, not even yelling rude things about the computer's manufacturer.
I'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:
GRUB loading.
Welcome to GRUB!
error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>
I have recently decided to try out Ubuntu(Lucid Lynx) using wubi. Everything was absolutely superb and realizing that I have a lot to learn and looking forward to it. Everything was fine until I updated and ticked 2 boxes for updating grub and restarted and couldn't boot into anything. I have xp on 80gb 2.6 celeron, and Ubuntu loaded through wubi on 320 gb external hard drive.
error: no such device??????????????????
grub rescue>
It may seem a little slow for me to put to the test your responses, because I will have to disconnect the PC that I am using and use those connections on the 2.6. This one I am using at the moment is 400hz p3.
I have been using various versions of Ubuntu for many years. I love it and I want to stay with it. Now I need help more than ever. So basicly I've searched through forums and other sites which seem to have had the same problem I am having.
However, I've tried all the "fixes" and nothing works at all at this point.
Here is what I have tried so far: [url] and every suggestion here: [url]
When I put in "sudo fdisk -l" I get this:
So after trying the suggestions in the above links I would restart and still get: "error: file not found. Grub rescue>"
I am trying to install it from a usb to an external hd. I installed Ubuntu 8.4 on the same hd before and it worked fine however I need one of the newer versions to use the programs I need. I've been at this for hours and maybe I am just missing something simple.
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedI downloaded wubi to install it on my old desktop which runs windows xp pro. The installation went through and it asked for some updates. After the updates, it rebooted but got stuck to the msg in the topic sentence. I don't have no live cd's for ubuntu and tried to read some earlier threads but they don't make any sense to me as I have no previous knowledge of linux. how to deal with this in a simpler language?
View 2 Replies View Relatedi get this error when i try to boot from harddrive:
grub loading error: no such disk grub rescue>_
I have tried to upgrade to 10.4 LTS it crashed I use dual booting whenever I try to start the computer it goes in to grub rescue > I have used wubi to install the dul booting, now I can not get into my window nor ubuntu. what can I do ?
View 2 Replies View RelatedTrying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code:
error: out of disk.
grub rescue>
I tried using following some instructions i found after googling for the problem:
Code:
ls (displays the partitions and devices Grub can see)
set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
i just installed ubuntu 10.10 x64 on my computer and removed the windows 7 partition and installed it on that one it installed as usual now as i booted it give me the following error
Code:
error:no such partition grub rescue> i tried one or too methods given to restore grub but it isnt working wht can be done ?
I installed ubuntu 11.04 on a usb hard drive which I created a 100 gig partition however when i try to boot from the usb drive I get the message error:no such partition grub rescue> when I boot from live dvd I can see the partition I created with all the files on it.
View 1 Replies View Relatedwhen it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
After lots of searching last night I noticed that over the last couple of days there have been quite a few posts of people receiving the error: no such device lots of numbers grub rescue>. I have a dual boot vista/ubuntu setup with ubuntu on my d: drive and windows on my c: drive and it happened to me last night. So after my freaking out when I received the grub rescue> error after updating somethings in my ubuntu install and restarting. Once the computer rebooted bam! error. after much freaking it only fixed itself by reinstalling the windows bootloader via the vista rescue disk I was wondering if there was a way to prevent this from happening again? will ubuntu attempt to "update" itself again?
View 5 Replies View RelatedI'm using the Live CD and have followed steps to recover grub2 after XP install. (damn Windows)!
Upon rebooting I get the grub> prompt with no where to go. Upon installing grub via the Live CD I get this:
Quote:
Update:
When I do this link, upon doing the
Quote:
I get this:
Quote:
I attempted to upgrade from 10.04 to 10.10. Upon restarting, I was presented this message:
Code:
error: the symbol 'grub_xputs' not found.
grub rescue>
I poked around the forums and found several posts that would probably be helpful but... I am unable to boot from a USB nor can I burn a Live CD as my other computer is a netbook. I made USB first boot in BIOS, but no luck.
I was messing around with the partitions and accidentally y deleted the ubuntu partition! I have Windows 7 as a dual boot but I can't access to that OS anymore. The message that I get is: error: no such partition. grub rescue>
View 5 Replies View Related
