Ubuntu Installation :: GRUB Error 15 ?
Jul 30, 2010
I was trying to remove a Kubuntu usplash image from my dads laptop with "StartUp manager" when I accidently clicked "Restore to default settings". Now I get a "Error 15 blabla" after selecting what to boot from GRUB.
/boot is on a separated partition. "find /grub/stage1" return hd(0,4) so i ran "root (hd0,4)" and "setup (hd0)". The thing is that GRUB is set up fine and it works as it should (the list of OS'es shows up etc..), but when i choose something to boot it gives me the error 15.
View 4 Replies
ADVERTISEMENT
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Dec 22, 2009
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
View 2 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
May 19, 2010
I just (for the first time ever) installed a version of Ubuntu. It is 10.04. I installed off of the Live Disk. I was having a great time until the first time I went to boot into it and I got the message
"Error: No such device: "long number" Grub Rescue> "
[Code]...
View 3 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
[Code]...
View 9 Replies
View Related
Nov 2, 2010
I tried installing 9.04 on an older computer and was getting the Error 18 from Grub 2.5, likely because BIOS couldn't access the kernel. So I decided to remove Ubuntu and Grub completely and I'm now back at square one. However, I still very much want to dual-boot with Ubuntu. I was thinking I'd try again with 10.10 because it uses Grub 2 which I hear would probably take care of the problem. is this correct? Am I likely to have better results with Grub 2, or will I probably run into the same problem?
View 3 Replies
View Related
May 24, 2011
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
View 1 Replies
View Related
Mar 30, 2010
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies
View Related
Feb 13, 2010
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
View 4 Replies
View Related
Jan 10, 2010
So after having performance issues with Karmic in ext4 I decided to install Hardy with ext3. Was blazing fast, epic, I loved it. But I wanted firefox 3.5 & all the other cool stuff Karmic has.. so I decide to install Karmic, but this time with ext3 instead of 4.
First installation: After the installation went fine, no errors while installing or anything. I remove the CD and reboot. "GRUB Loading, please wait.. Error 15" I did my googling, with the live CD to try and figure out a way of fixing this error. No luck. I did find out that the error is caused by the GRUB trying to load form the wrong drive. So I try to boot directly from the Karmic drive, Error 15. Try to boot directly from the Windows drive, Error 17.
This is the first time this has ever happened to me. First time installing Hardy, everything went great. Installing Jaunty, everything went great. Installing Karmic (for the first time) everything went great. Uninstalled Karmic and installed Hardy, everything went great. Uninstalled Hardy to install Karmic = FAIL!. I did a clean install every single time. The OS is being installed (clean) in the same drive.
A 40GB drive for Windows. A 200GB drive for Ubuntu +/home +swap, and a 120GB(FAT32) for storage.
I installed Karmic 3 times, yes.. 3 times. The last time I installed I removed both the 40GB & the 120GB drives. Leaving only the one I was going to use for Ubuntu, the 200GB drive. After the installation I rebooted and Karmic loaded without problems. I'm in Karmic right now and it isn't all sluggish like it was with ext4, guess my old drives aren't good with ext4 *sight*.
But I can't use my Windows drive. When trying to boot directly from it, it gives me "GRUB Error 17" - I have to disconnect the Ubuntu drive to boot into Windows. Quick question: What the **** is going on?
Someone help, please.. I'm tired of this ****.. and if I have to install Karmic one more time, I won't. I'll just give up and disconnect my Ubuntu drive, put it away and let it accumulate dust somewhere, seriously.. Someone help me correct this without having to install the OS again.
The GRUB error is while the GRUB is loading. It doesn't give me the option to select a OS.
View 9 Replies
View Related
Jan 24, 2010
When he rebooted his Grub gave the error: Grub error 22. He doesn't have internet right now. Know of any fixes? He's booted into a live cd.
View 9 Replies
View Related
Jan 29, 2010
I'm using Kubuntu 9.10 with Ubuntu-desktop installed.I've been using kubuntu for sometime now but i dont know much technical things about it. I have two hard discs (160GB SATA and 80GB PATA).I have just installed Windows XP Professional and then reinstalled grub2 from a live CD. Both OS are on 80GB PATA drive.The Grub menu at boot time has "Windows XP Professional" entry in it. The problem is thatwhen i select that entry, i get an error saying:Quote:Grub:Error:No such device - "a string of letters and numbers"Press any key to continue...When i press any key, it goes back to the grub menu. Kubuntu and Ubuntu work fine.When i go to bios and change my hard disc boot order, grub is bypassed and Windows boots and works good. I dont know much technical things but i think maybe its the problem with Windows entry in grub. (something to do with lines map(hd0,hd1) and map(hd1,hd0) (But i'm nt sure. I just said wat i thought it might be)
View 9 Replies
View Related
May 11, 2010
Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.
View 3 Replies
View Related
Jun 11, 2010
I just reinstalled kubuntu and after restarting( following the install) I was confronted with error 15 when grub starts.
View 3 Replies
View Related
Jun 17, 2010
I'm trying to fix the partitions on my laptop. how it was setup before I made the change:
[code]...
I shrunk the windows partition to about 150 gigs, and used the unallocated 25 or gigs and formatted it as ext4 and copied dev/sda1 to it. Now I have all the same as above now with
[code]...
I had two installations of ubuntu and deleted the sda1 partition. Now I get a GRUB Error 17 when I boot. I'm in a live CD and I have access to a console, how can I reconfigure GRUB?
View 1 Replies
View Related
Jun 20, 2010
I'm running Ubuntu 9.10 and did an upgrade yesterday via the Update Manager. Just installed all proposed upgrades. After rebooting, my newest kernel throws an error 16: inconsistent filesystem structure. When I select my previous kernel from the GRUB, no problems. How do I debug this error? Or better yet, how do I fix it?
View 3 Replies
View Related
Oct 10, 2010
I used wubi to install the dual booting, after I have upgrade from 10.04 to 10.10 when I launch linux it goes direct to grup.
View 4 Replies
View Related
Jan 3, 2011
I decided to bite the bullet and upgrade to the 10.4 LTS from 8.10. Did a complete fresh install and chose to automatically clean off the drive and install the new system from scratch.I have three hard drives with the system on the smaller 40GB and the other two drives are 500GB and 2TB.
From what I can tell my problem probably stems from having the older Grub 0.97 on the system on another drive, but I can't seem to figure out how to purge it. When I mount the partitions, there is no /boot folder... The following is the output from the Boot Info Script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
[code]....
View 8 Replies
View Related
Feb 14, 2011
I have just bought a new HDD and installed it in my Ubuntu server. The problem is that when I try to boot, I only receive the message "Grub error 17" and at that point the computer freezes.
In my troubleshooting I found that without the new drive, the computer starts and the hard drives are listed in BIOS as follows:
1. DVD-rom (ide) - Master
2. 80gb disk (with OS installed) (ide) - Master
3. 1tb disk (sata) - Master
In the new setup the disks are listed like this:
1. DVD-rom (ide) - Master
2. 80gb disk (with OS installed) (ide) - Slave
3. 1tb disk (sata) - Master
4. 2tb disk (sata) - Master
May this different listing in BIOS lead to the Grub error?
View 5 Replies
View Related
Jan 8, 2010
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies
View Related
Jan 25, 2010
The follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies
View Related
Mar 6, 2010
I think the pc updated, or at least that is the only thing I can figure. Anyhow, pc froze so I reboot system. I have dual setup, after choosing Ubuntu, I receive GNU GRUB version 1.97~Beta 4 error. I am also told to press TAB for further commands, but none of the commands seem to do anything.
View 5 Replies
View Related
Mar 9, 2010
i get this error when i try to boot from harddrive:
grub loading error: no such disk grub rescue>_
View 9 Replies
View Related
Mar 21, 2010
I have tried to upgrade to 10.4 LTS it crashed I use dual booting whenever I try to start the computer it goes in to grub rescue > I have used wubi to install the dul booting, now I can not get into my window nor ubuntu. what can I do ?
View 2 Replies
View Related
May 21, 2010
My problem now is: After booting my laptop, Ubuntu doesn't load and i'm stuck in a GRUB command prompt and not sure what to do. If i type "boot" I get "error: no loaded kernel"Here is how I got there:1. I ran 9.1 healthily until I was prompted to do an upgrade. I ran the upgrade but some packages weren't authenticated so I ran a partial upgrade. 2. I reboot but I'm faced with "Error 15: File not found". After some research and going through the forums, I thought I found the solution by following these instructions to copy the GRUB files from the Live CD (https://help.ubuntu.com/community/Gr...0from%20LiveCD)3. Once I completed this, I'm now stuck at a grub> prompt when rebooting (the error 15 has disappeared). (the screen header informs me i'm dealing with "GNU GRUB version 1.98-1ubuntu5"Any thoughts on what I might have done wrong? From my reading today, I might have installed GRUB2 (even though Grub legacy would have been appropriate?). What is the best way out?
View 9 Replies
View Related
Jul 30, 2010
I have an IBM T60 which already had Windows 7 and Ubuntu 10.04 running fine in dual boot. For work reasons, I also needed Windows XP, so I started to install it last night. The install didn't work because of lacking SATA drivers, but when I tried to reboot my computer, GRUB was giving an error. [grub rescue>] Rebooted with the live CD and attempted to reinstall GRUB, but I still get the same error when I restart. I reinstalled GRUB with the directions from here: [URL]...
View 1 Replies
View Related
Nov 2, 2010
Have a Dell Inspiron 4100 laptop. 1GB RAM and 1 Ghz processor. Has a working install of Oracle Enterprise Linux 5.4 OEL uses Grub version 0.97 My OEL install works well and I do not want to make any changes to it such as upogarding GRUB to a later version etc.
I have installed Xubuntu mini and this completed without a problem.
I have a single hard drive.
I went into OEL and mounted the Xubuntu root drive so I could see the /boot/grub/menu.lst file.
I copied the entries for the main xbuntu kernel etc and pasted them into my OEL grub.conf.
title Ubuntu 10.10, kernel 2.6.35-22-generic
uuid d6ed555c-54a3-4639-af25-3582c60624ad
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=d6ed555c-54a3-4639-af25-3582c60624ad ro quiet splash
[Code]....
I am doing this so someone else can borrow this laptop for internet use for a few weeks and OEL is not very user friendly and also want to protect my install.
View 9 Replies
View Related
Nov 17, 2010
yesterday i upgraded Ubuntu 10.04 to 10.10. During installation i also upgraded grub to version 2. It said that there were two options that i could choose to boot and i choose both. Installation finished with out a hitch. When i attempted restart my laptop i got this message:
error: no such device: 12631218-8ac6-4505-b4cb-a66a1de1814f
grub rescue>
I tried the command help and received a message saying that the help command was not recognized. So i then gave Google a bit of a work out and have tried reinstalling grub and manually coping the grub files all to no avail. The problem i believe stems from how i have Ubuntu installed. I have Ubuntu installed like an application on windows 7 on a separate partition on my hard drive. Looking back on it i'm not to sure why i choose that route, but that is how it is installed.
View 3 Replies
View Related
