I upgraded my dell inspiron 6000 from ubuntu 10.04 to 10.10 then rebooted and now I am stuck at the grub prompt. I am able to boot from a flash drive and have run the boot script. This laptop did not have a dual boot system on it but it did have windows on it at one time, converted to ubuntu.
View 9 Replies
I have tried to follow the different possibilites discussed here [URL]
But I am not getting anywhere.
Btw, this is not my screenshot. Mine shows GNU GRUB version 1.98-1ubuntu5.
I was deleting some space off my C Drive and I believe I may of accidentally deleted Fedora, or some of it! I have a dual boot with Fedora and Windows XP so when I started my desktop up it would load into fedora by default or I could press a key to load XP! (It rhymes!) Now, however, it instantly loads up into "Grub"
And that's it! Run, Or Exit, or anything really, doesn't work! Except Reboot! So I'm a little stuck. It's an old PC and the Windows XP disc is long gone, if I ever had one! I had this thought that perhaps if I reinstall Fedora from a CD it many bring back the old command prompt and let me get back into XP again? Or, is that crazy talk??
I used wubi to install the dual booting, after I have upgrade from 10.04 to 10.10 when I launch linux it goes direct to grup.
View 4 Replies View RelatedMachine specifics: Win Vista with Ubuntu 10.04 installed via Wubi. Upgraded from 10.04 to 10.10 - killed Grub. Following other posts, I booted off a 10.04 Live CD and ran boot_info_script. The results are below. It's telling me core.img cannot be found - can someone please tell me what to do next (before I blunder on and make things worse!)
[Code]...
I upgraded to 10.04 but now i can't boot windows 7 from the grub. what can i do?
View 9 Replies View RelatedHad v9.x installed alongside Windows XP SP3 install. Have not used it that much since install.
Got the bug to upgrade to v10.
Went through the upgrade process, everything seemed fine.
At the end of the install process asked which dev to install GRUB onto - I selected only one drive, the wrong one of course, and the reboot failed.
Boots up with:
Have LiveCD running now to post. Ran Info_boot Script.sh - results below.
Will reinstalling v10 from Live CD fix this? Will this use Wubi or just go through normal install process? Or is there an easier fix to install GRUB on the correct drive to get the dual boot choice of Windows XP and Ubuntu back.
Naturally I need to get back to Windows ASAP - it's the net gateway and print server for my home/office setup.
Boot Info Summary:
The Grub Windows XP selection only gets "Starting ..." and then, nothing. Ran boot info (ref. below)
Updated Grub:
$ sudo update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-2.6.32-31-generic
Found kernel: /boot/vmlinuz-2.6.32-30-generic
Found kernel: /boot/vmlinuz-2.6.31-23-generic
Found kernel: /boot/vmlinuz-2.6.28-11-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done .....
The upgrade finished, did a y to reboot and it boots to memtest, no sign of the grub screen at all.
View 2 Replies View RelatedI have been trying ubantu 9.10 via dual boot (with windows XP) for a while now. Today I decided to wipe out windows and install ubantu only. After I completed the install I get GRUB prompt and I cannot type anything. So I booted from CD again and opened ubantu from disk. ran the boot_info_script as mentioned on other posts here and here is the results
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 2928391 of
[code]....
Installed Ubuntu 10.04 a week ago or so (using wubi.)Tried to upgrade to 10.10 from within Ubuntu using the update manager.Now the PC will only boot to grub rescue.When booting, this is what i get:error: no such device: cd200414-0606-4d7d-8c08-004e9b5dc92d.grub rescue>Three commands work: ls, set and insmod.The ls command only yields: (hd0)(no partitions like (hd0,1), (hd0,5), etc.)
View 4 Replies View Relatedi have dual boot computer win7 and 10.04 ubuntu. i installed the ubuntu inside the win7
now i have problem that GRUB prompt out every reboot. i could get into system by type this(but GRUB come back after reboot)
Code:
set root=(hd0,1)
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /initrd.img
[Code].....
I installed 10.04 clean on the PC.Not other operating system.It booted to Ubuntu fine after the install and all appeared to be working fine.Used the upgrade manager to install the upgrades to the basic system.I had not yet loaded in any non-ubuntu or medibuntu repositories so this was the first, basic upgrade.After the upgrade,I can no longer boot to Ubuntu but boot to a grub prompt instead.I presume this is a recover prompt. How do I "recover" and continue booting to Ubuntu?
View 8 Replies View RelatedI installed 9.10 with wubi and lately I had a boot problem with the result is that it boots to a grub prompt. I tried several commands, but no success. I thought I hosed the system. [URL]. Once I copied the new wublidr file over, that did it! Give it a shot, as it works.
View 1 Replies View RelatedI just installed Ubuntu 9.10 on hd1 - /dev/sdb1 at the end of the installation I chose to install grub at hd0 - /dev/sda1. The file system I chose was ext4 for ubuntu "/" - 50 GB,
ext3 for "/home" - 5 GB, and 1.5 more for swap. When the installation was complete I got the following prompt:
GRUB loading
error: no such disk
grub rescue>
>
There was nothing I could do, pressing TAB did not show me all the commands like grub is expected to. Typing 'help' did not show any commands as well, instead it showed me - "NO SUCH COMMAND" or something like that (I did not took note of what the output was). I believe the problem is in the grub loader - which was not really installed properly in hd0 - /dev/sda1 (which is FAT32 - windows)
Two days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
upgrading my Karmic 9.10 to Lucid 10.4 I can't boot anymore to Linux only to Windows.My installation is a WUBI installation and I installed it on the only harddisk I have in the folder c:ubuntuNow when I boot I get a grub prompt and when I do LS I see hd0,msdos01 as partition.Now's I've tried to manual boot it by using the following commands from the ubuntu manual
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro
after this command I get an error
[code]....
i have a dual booting the first one being ubuntu 10.04 within which i have installed windows7.Unfortunately,i've formatted that part of my hard disk in which i've had ubuntu. Now my problem is i cant load into any of the two os and i dont want to loose my vital data in the system.I've tried booting using the live CD but in vain.i desperately need my info in my laptop.
View 3 Replies View RelatedI'm running Ubuntu within VMWare on a Macbook. I followed these steps [URL]... Recommended) to upgrade form 10.04 to 11.04, which actually upgraded to 10.10 first, and then a graphical upgrade brought me to the 11.04 upgrade, but then i ran into the problem where a grub> prompt appears when i start up the machine... nothing else happens. I found this thread [URL] which seemed similar to my problem, but the suggestions didn't work.
Code:
grub> ls
(hd0) (hd0,5) (hd0,1) (fd0)
grub> boot
error: no loaded kernel.
grub> linux
error: no kernel specified.
that's what I see. any way to resolve this without having to download the CD and start from scratch? It's grub 1.98, if that's important to know.
I have installed BackTrack 5 and I have set GRUB up:
Code:
root (hd1,4)
setup (hd1)
However, the GRUB prompt appears at boot instead of the GRUB menu. However, when I boot from the Live USB, the GRUB menu works fine. Here are the contents of the grub.cfg:
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
# .....
The reason I want the GRUB menu to show up of because I would like to dual-boot BackTrack 5 with Windows 7.
I decided to upgrade my FC installation to the latest version - FC itself offered the upgrade when I turned the machine on, so it appeared that it was nicely packaged to make the upgrade easy.After a long download of packages, the machine rebooted and then started taking me through configuration options (timezone, disks to use for the installation etc) but then it crashed trying to write to disk and now leaves me at a grub prompt whenever I boot.Is there any way to "get at" the installation files and get back into trying to install or do I now need to download an ISO and burn a DVD and start all over again?
View 1 Replies View RelatedRecently I messed up GRUB boot loader in my laptop installed with Ubuntu which resulted in grub rescue prompt. So I had to boot Ubuntu Live CD to get it fixed. Thought of blogging it, may be useful for some one.
This fix involves two steps. First one is to chroot into Ubuntu installation partition. Second one is to install the grub MBR (Master Boot Record). I am using Ubuntu Lucid 10.04 and Live CD also of same.
Continue reading here: http://karuppuswamy.com/wordpress/20...rescue-prompt/
Installed 10.04 on my daughters laptop from within windows Vista. All went OK but I had two boot loaders, i.e. turn on laptop and I would get the Windows loader asking if I want to boot in to windows or Ubuntu. Upon selecting ubuntu I would get the standard grub loader that I have on my PC. Did an update a few mins ago and it asked me to update grub which I did and as there was only one disk showing clicked forward. Now on reboot I have grub rescue prompt, no such device. Hard drive is a single 80 gig drive with windows on one partition and ubuntu in another. Have the live cd so can boot from that I guess. What do I do next?
View 9 Replies View RelatedI have the following problem. I tried to make a persistent USB Backtrack 4 r2. I followed the steps according to the instructions and did not noticed any errors.
fdisk /dev/sdb
Command (m for help): d
Partition number (1-4): 1
Command (m for help): n
Command action
[Code]...
I can boot from USB because when i use Unetbootin everything works fine. Although it'snot persistent in that situation. I seachered the web but i can't find the solution. I have run a script which i ran into on Sourceforge.net. The results are in the attachement. But unfortunately i am real Newbie on linux so..
When I try to boot I only get to the grub rescue prompt doesn't matter if I try booting from ubuntu 11.04 cd windows 7 disc or the hard drive. At the moment ubuntu 11.04 should be installed although it gave me a ton of errors as I installed it and as soon as i restarted the computer i got this prompt.
View 2 Replies View RelatedI was dual-booting XP and Ubuntu 10.10 for a while, but as I never used Ubuntu it was just taking up space, so I figured I'd get rid of it. I used a partitioning tool from inside XP to remove the Ubuntu partition, forgetting that I used GRUB2 every time I booted to select which OS to load. Now when I start my computer I get stuck at the "grub rescue>" screen.After searching for solutions to this problem all of them said to either use the Windows XP CD to fix the Master Boot Record or reinstall Ubuntu, but I dont have my XP CD and there isnt enough room on my hard drive anymore for a Ubuntu install. Is there anything else I can do to fix this?
View 5 Replies View Related I recently attempted to install Debian 8 on my iMac (late 2011). I partitioned my drive using disk utility to create FAT partitions (100GB for Debian and 2GB for SWAP) and installed rEFInd to boot into Debian.During the installation process I selected the drives I partitioned and set the mount points for each as / and swap.
Everything was fine and installation was successful and was prompted to restart to set up Debian. However when I did Grub did not recognise the Bluetooth keyboard. Unable to do anything it started the "Debian GNU/LINUX option" and loaded into what seems to be the grub prompt/terminal with the following displayed in bold:
[ 3.538535] i8042: No controller found
Loading, please wait...
Fsck from util-linux 2.25.2
/dev/sda5: clean, 112838/6119424 files, 1276387/24455424 blocks
[ 9.123670] [drm:radeon_pci_probe] *ERROR* Radeon kernel modsetting for R600 or later requires firmware-Linux-nonfree.
[ 10.715321] systemd-fsck[363] : fsck.fat 3.0.27 (2014-11-12)
[ 10.715690]systemd-fsck[363] : /dev/sda1: 248 files, 35995/403218 clusters
Debian GNU/Linux 8 iMac tty1/I was able to get my hands on a USB keyboard which works. Obviously I can't boot into Mac now because grub has taken over.
I had 250gb hard disk with dual boot, xp and ubuntu 10.10.Yesterday, i tried to upgarde my ubuntu 10 to 11 from a live cd....b4 doing so, i used a win software EasyBCD to fix the mbr but it didn't work properly..and i ignored it(my biggest mistake)and deleted the ubuntu partion from the windows device manager. It just displays "Booting from Live CD" for few minutes and again displyas the same above error.What should i do now?Its ok if i m not able to recover my data back...i hv sycnd my docs on the internet.
View 9 Replies View RelatedFirst, I know there are numerous threads on grub errors but I have tried all possible solutions and that's why I'm here. My issue is that I'm not able to boot from the grub prompt as described for installing grub from a LiveCD https://help.ubuntu.com/community/Gr...0from%20LiveCD. I can see grub is installed but is missing the kernal and other files. code...
I ran the boot_info script and the output is attached. From what I can tell it cannot even detect an OS being installed, but I've kept everything up to date and never had any issues. Everything was fine yesterday and now this. Also, I tried the Boot Repair CD and that did not work.
