i recently upgraded to LTS 10.04 of ubuntu....but after 1 day, itz not opening....some errors are shown....i tried to rectify bt failed....can any1 help me to recover a file.....i just need dat file because it is my project.
I was using Ubuntu 10.04 and ran the upgrade. System > About now says I am now using 11.04. However, System > Administration > Update Manager says New Ubuntu release '11.04' available > Upgrade. Should I run the upgrade again, or is there a quicker way to fix this?
I would like to know when usb inserted, its showing cant mount when i clicked details its showing bad blocks in beginning , and smething in /dev/sd6. Can i knw why usb drive cant be mounted automatically , even if its set to do so, and to cope the error mentioned above
I have been getting video error's in gnome-panel since I upgraded to Natty. It seems to become transparent on part of it, and my background covers it. I have tried deleting my gnome-panel preference's, to no aval. Does anybody know how to fix this?
In normal desktop GUI is working fine. But when in install VNCserver and tried to connect form my window machine through Ultra vnc it is not working properly. The issue I am facing is: when I am opening a terminal and enter later "m" from keyboard its work as a short for mail, and in case of later "s" the shortcut is "shutdown tab" those are present in panel. Then I remove those from panel and now I can enter the word m and s in terminal. The behavior is seems like a bug.
i hav recently upgraded to 10.10 and followed by wine. I tried to upgrade from wine 1.2 to 1.3 but i could not. Later i encountered a problem. This is it:An unresolvable problem occurred while initializing the package information."E : ntu-wine/ppa/ubuntu is not known on line 2 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list'"
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
I am having big problems with my laptop. I use a wubi install of Ubuntu 11.04 atm. This happens like 2/3 times a day, basically I will just be doing something normal on the laptop, then suddenly the screen goes black with white writting - none of which makes sense to me
This is one of the screens that appears:
It stays like that for ages, then I have to restart.
Earlier i was using red hat on my laptop..then i installed windows 7...so grub is replaced bt windows boot loader....nw it is showing grub error...how to remove this grub error....so that both can work fine?
I had just configure RAID 1 on my IBM X3400 Server ..Partition information is md0 boot , md1 swap and md2 is root ....but after resyn when i run cat /proc/mdstat I realize that md0 and md1 is ok and present with [UU] status. BUT the md2 is showing on one [U_].. that means my root partition is not properly in RAID 1..
Please suggest how can i make it active in both drive. Or i need to reinstall complete system again. Screen shot attached
#!/usr/bin/python import smtplib sender = 'from@fromdomain.com' receivers = ['to@todomain.com'] NameError: name 'SMTPException' is not defined apparently there is something wrong with /usr/lib/python2.6/smtplib.py but i cant make it out
I selected the zc0301 driver as module when i compile the kernel...and i copied the "zc0301.ko" file from default kernel...but when insert using "insmod" its not working..showing the error..
insmod: error inserting 'zc0301.ko': -1 Invalid module format
2 packages excluded due to repository protections Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package iptstate.i586 0:2.2.1-5.fc11 set to be updated --> Processing Dependency: libnetfilter_conntrack.so.1 for package: iptstate-2.2.1-5.fc11.i586 --> Finished Dependency Resolution iptstate-2.2.1-5.fc11.i586 from fedora has depsolving problems --> Missing Dependency: libnetfilter_conntrack.so.1 is needed by package iptstate-2.2.1-5.fc11.i586 (fedora) Packages skipped because of dependency problems: iptstate-2.2.1-5.fc11.i586 from fedora
My httpd error_log says the following error while running the htpasswd.pl [Thu Jun 24 08:25:54 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Thu Jun 24 08:25:54 2010] [notice] Digest: generating secret for digest authentication ... [Thu Jun 24 08:25:54 2010] [notice] Digest: done [Thu Jun 24 08:25:54 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations [Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] (2)No such file or directory: exec of '/var/www/cgi-bin/htpasswd.pl' failed [Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] Premature end of script headers: htpasswd.pl
Also the apache shows this error in the webpage. Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.3 (CentOS) Server at 59.93.43.183 Port 8284
I am using the htpasswd.pl script dwoloaded from net. I can run the perl file using the command line and gets the sytax OK message. The contents of te htpasswd file is as follows: #! /usr/local/bin/perl -T # htpasswd.cgi by David Efflandt (efflandt@xnet.com) 8/97 # Last update 10/4/99 # Update password file from the web for use with user authentication. # Stores each line in the format: username:crypted_password .....
Upgraded to 'current' and now have a series of problems. First, when trying to 'startx' to fire up KDE I get the following error message, "Could not start d-bus. Can you call qdbus?" If I try Xfce it gives this similar message, "Failed to execute dbus-launch to autolaunch d-bus sessions. When logging in, but before entering the password this error message pops up:
While loading a rpm package its showing error of failed dependencies so wat to do for dat pls guide me n in another case its showing cant create transaction lock on /var/lib/rpm/_db.000
I have created a shell script to customise mv command, now i have achieved to accomplish all the functionality of mv by using alias. But i found difficulty in accomplish the funcionality with options [Like mv -i or mv -f etc.]. I thought about logic which check the first argument whether its starting with a minus [-] or not. if its starting with argument it will set a flag and execute accordingly. But whenever this condition is checked it shell script will throw error of destination operand missing. But the same will work with out option.
Note: I have used an minus[-] expression for decreasing a counter on the script above. The below mentioned is the portion of script. Sry for troubling Im not gud @scripting.
for i in $* do { argument=`expr $argument - 1` if [ $argument = 0 ]; then exit [Code]....
Repository rhce1 is listed more than once in the configuration Setting up Install Process Setting up repositories http://192.168.142.135/yum/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error: Cannot open/read repomd.xml file for repository: rhce1
i just updated from karmic 9.10 to lucid 10.04 using the online upgrade option. so far everything is working great. the only issues i am having seem to involve firefox. when i visit videos i get the message "your browser is no longer supported. please upgrade to a modern browser." i am running 3.6 "canonical" so it is "modern". i am able to watch videos after i close the message. it's just an annoyance to get this message every time i view a video.
next, is on some websites (like this one) it will not supply my login info. but on a few sites (like ebay) it does supply my login info. not sure why some sites work while others don't. the info is there when i look under my saved passwords....
Having one issue with evolution not showing html websites showing up in email like verizon sending a promo. I have gone to edit, preferences, mail preferences, html messages and have always load images from the internet chosen. I have also added sender to contacts. Even if I right click message and tell it to dload images it doesn't.
When I try to connect a projector to my laptop (already running) and hit the fn+f7 (the designated button for switching screen), nothing happens. I see "no source found" on projector screen and my laptop screen works perfectly. Now if I restart the laptop with the projector connected, I see all the intial booting messages on the projector screen (not on my laptop), then the gnome login screen appears on both the projector screen and laptop (when the login screen appears on laptop it looks like it has lower resolution than my usual laptop resolution). But immediately after I log in, my laptop screen goes blank, and projector screen becomes the only active screen.
If I restart without the projector, again all normal operation on laptop screen is restored.
I feel like I am missing some very silly options. Any help is appreciated.
Here is the output of xrandr when the laptop is connected:
Have installed ubuntu on a separate partition on single hard disk and system initially worked on a dual boot basis with windows xp. However after installing most recent series of updates computer is failing to boot.
Error message is 'error : no such device : 6937cabe-f115-455b-a248-6f8d46f80682.' prompt showing is 'grub rescue>' am now unable to access either windows or ubuntu.