finally just got ubuntu to install on my emac a1002, I had to use the powerpc version. The install went fine, it restarted and loaded ubuntu, but after it loads goes to a blank black screen. And I imagine it sits there forever, yet I've only left if for about 5mins or so. The emac is from 2003, and has a 1ghz processor (Powerpc) and has 256mb ram.
View 1 Replies
I've just tried installing Ubuntu 10.04 on my powerpc. It installed fine, and booted first time ok, but since restarting it just seems to boot into a black screen. My monitor says 'going to sleep mode'
I don't think it's hanging on anything, as I can hear sounds if I play around with the keyboard. Could this be something to do with the resolution being too high? If so, can anyone tell me how I go about changing this?
imac g3 power pc screen goes blank and the power button goes orange after kubunto loads, but the computer is still running, how do i fix this problem, if you have any information please be very spesific i have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if i hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
When I load Ubuntu, it goes to the desktop screen, shows my desktop picture, loads Pidgin which I have set to start on startup, loads Icons, and then the screen goes black. The mouse cursor shows up, I can move it around, and then it goes black again, and the mouse cursor shows up again. This repeats a few times until the cursor freezes. This started happening after I tried fixing a bug with new drivers for my Intel 845gl video card. The instructions I followed are these:
Code:
To use the available fix, run the following commands:
pt-add-repository ppa:glasen/855gm-fix
apt-add-repository ppa:brian-rogers/graphics-fixes
apt-add-repository ppa:glasen/intel-driver
aptitude update
aptitude install linux 855gm-fix-dkms
aptitude dist-upgrade
,taken from here.
I have tried some of the options in recovery mode from GRUB menu, none really work, except booting with default graphic configuration, or something similar like this.
After entering runlevel 2 and gdm loads, I only get a black screen. I hear a beep that indicates gdm has loaded, but everything stays black. Trying to switch to a console using ctrl-alt-f1 does absolutely nothing.
At one point, I disabled gdm from starting in runlevel 2, and rebooted. I then typed into tty2 "sleep 60 ; reboot" and in tty1 "gdm" and hoped for a reboot if the graphical login didn't appear. No reboot occurred, my black screen remained.
I've issued acpi=off at kernel command line (from grub) and disabled all acpi services. That seemed to work for a few hours but now I get the black screen again every time. There's no option in the BIOS to switch from acpi to apm, so I've done all I can do on the software side of things.
[Code]...
I have a bad problem with debian 5.0 . I have installed it all right with no fail or error and when it boots,i just see a black screen with nothing else. My graphic card : Nvidia 9500M gs. I tried ubuntu,fodero but both of them were same after installing debian (Before i didn't have this problem)
View 3 Replies View Relatedjust installed ubuntu on my win 7 laptop using the wubi.. after the install it said restart,so i restatred and booted up ubuntu which went sound,it then says finishing installation.. ubuntu comes up does the partions then started copying files then once it had done this the screen went black with loads of writing on it..it seems to just stay like this.. i left it 30 mins the restarted laptop again..laptop working sound booted ubuntu again and the same thing happened..
View 1 Replies View RelatedI'm installing OpenSuse 11.4 to a HP DL180 G6 server, with no luck. I go through the installation process when booting up from the DVD, and when it finish and restarts in loads Suse and then goes to a black screen and doesn't respond.
View 9 Replies View Relatedafter spending more than 48 hours watching the install bar creep along, it has finally finished! but when i boot up my ibook it gos to a black screen and nothing happens.
View 1 Replies View RelatedI'm trying to install Ubuntu on an iMac G4, and I had a promising situation the first time through but I botched the install due to my newbishness and haven't been able to boot from the install CD since.
Here's the situation:
Hardware
800 Mhz G4
256 MB RAM
15" LCD display
32 MB GeForce2 MX Video Card
"Standard" Airport Wireless Card
(more details here)
What Happened: After poking around on the forums some and reading through some of the wiki pages, I decided that 8.04 would be a good place to start, so I downloaded and burned an install disc. My first attempt booted almost perfectly, but I confused the "booting from the CD" with "installed Ubuntu" (Iknow, I know...), and promptly rebooted back into OS X.
Since then, I've been unable to successfully boot from the CD. Using the 8.04 disc, I'm prompted for what style of install I'd like, and I feebly type "live," the ramdisk loads, and then the screen goes blank, reads "loading" in the upper left for a second, the optical drive whirs for a bit, and then everything hangs on a black screen with a white cursor in the upper left. I thought I might just be impatient, so I let it sit overnight, but there was no change in the situation.
I know this isn't much information to work with. Is there a way to enable a more robust boot description? Something that will let me know what's going on when the screen goes blank and the optical drive whirs?
I have a 8.2 MBP with a 1680x1050 screen and a 6490M graphics card. I'm trying to boot from a usb stick ubuntu live. I'm able to get to the ubuntu menu, asking to install or start live boot, but when I select live boot I get a black screen( backlight is still on but entire screen is black). I've waited at that screen for quite some time with no luck.
View 2 Replies View RelatedI recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:
Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
[code]...
I turned on my computer and selected Ubuntu with Linux 2.6.38-8-generic and press enter, the screen goes black and my computer starts beeping
View 4 Replies View RelatedI've been installing Linux Mint with OSX on a bunch of iMacs, and its been working perfectly excpet for one of the iMacs. The screen will just go black when I boot from a live CD, but I can hear the login sound play. It's strange because all of the other iMac's run the live CD just fine. What could the problem be? I don't know what I can do to troubleshoot this problem.
View 3 Replies View RelatedJust did a fresh install of Natty B1 (previously had alpha 2).. I noticed this issue w/ A2, as well.. plugging in the exterminal monitor (via mini-displayport-to-vga connector) will do the following:
1) turn the screen on the laptop's display entirely black (but not turn it off).. i can move and see the mouse cursor.. but everything on the window appears to not rending or "painted" black..
2) external monitor never becomes active..
the only way to recover is to kill/restart X or reboot after disconnecting the extmon.. having extmon plugged in from boot produces the same results (and it doesn't seem to ever become active during boot up). sometimes this won't happen right away if i plug in the external monitor.. but opening the Monitors system prefs dialog will definitely cause (or detect displays) ,etc I waited to see if the issue would fix itself w/ the beta update, but it hasn't.. Any other 8,1 owners out there that can verify this issue? My (totally uninformed) guess is that it's due to differences in the display/gfx hardware and thunderbolt integration(?)
(I've seen a verification verifications of working-out-of-the-box.. but they were from 8,2 and 8,3 owners (which have discrete graphics cards))... If anyone's gotten this to work with some config stuff, I'd love to see that as well (since the wiki page for 8,1 says it works ootb). If someone could let me know where I should look to capture error output when the above issue occurs, that would be awesome.
how to get the Eclipse IDE to work on powerpc? I have Ubuntu 10.10 installed on an eMac G4 1.25, and installed eclipse CDT from the repos, which pulled in a ton of stuff with it. Starting eclipse results in nothing but the initial splash screen. A process called Java takes the top spot in the task list and sits there burning up CPU to max it out at 100%. It appears stuck there for good. It is a pretty virgin system except for the automatic updates. It was just installed yesterday.
View 5 Replies View RelatedI'm trying to install Kunbuntu 10.0.4 on a late 2009 27" Core i7 iMac. Unfortunately the screen is always black while the CD/DVD installer seems to work. All firmware updates neede to the machine have been applied and it is non affected by the known problems of the late 2009 27" iMacs.
View 1 Replies View RelatedI have OS9 and a PC with Win7. what is the best tool to burn the CD in Windows or OS9? I used Transmac on the PC but the G4 Cube won't boot from the disk though it reads it in OS9.
View 9 Replies View Relatedmake a lightspark deb for 10.10 Maverick PowerPC can someone lock this ??
View 7 Replies View RelatedI have a first gen mac mini g4 with a non-functioning cdrom drive and no mac os installation in place. I'm attempting to install natty (really any ubuntu OS that will work) through an external usb drive. The only functional machine at my disposal for preparing and partitioning the external usb drive is a seperate intel ubuntu box. I understand that I need to create an Apple_Bootstrap partition with yaboot installed inside so openfirmware can recognize the usb drive as bootable.
how do I create an Apple_Bootstrap partition on my external usb drive through a regular x86 ubuntu box? is "mac-disk" or pdisk commands available for x86 machines if not how or where could I find software to do the job?
I'm getting numerous Gnome errors after logging in... Previously everything was working fine; perhaps a software update messed things up? I have looked around for potential solutions, but none that I have tried have made any difference. The errors I get are: The panel encountered a problem while loading:
[code].....
how I can fix this? This is Ubuntu 9.10 PowrePC installed on a PowerBook G4 -- I'd really love to be able to see the battery level remaining (and seeing the time would be nice, too ).
My notification area seems to be loading some things as black squares, mainly my Wifi indicator. when it loads as a black square I cant click on it or use any of its functions etc, will no longer allow me to access my wifi settings from it.
View 4 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI have 2 computers with kubuntu 8.10 using vinagre for my remote desktop viewer and x11nc for my server and I am trying to connect remotely through the command line from one computer to login to the startup screen in the other computer. Is this possible, since it looks like my server does not start until after I log in to my desktop screen?
View 8 Replies View RelatedWhen I boot my pc it used to take me to a prompt which asked which OS I would like to boot. Today randomly, some grub rescue menu came up. I read online that that meant I had to fix my grub menu, which I did. Now a regular grub menu pops and and I have no idea what to do with it. Whats a grub menu? How can I just get back to my regular boot screen? I run dual boot xp and ubuntu, is grub a program of xp or ubuntu? I have no idea what this grub menu is and whats going on with my pc!
View 2 Replies View RelatedThere seems to be nothing in Preferences or anything, but after the other night, all new windows load in semi-full screen, where the File-Edit-etc menus are there, but the bar at the top isn't, and the taskbar at the bottom is covered by it. Its what happens with certain annoying ads, but now its any window.
View 9 Replies View RelatedI am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
