Ubuntu / Apple :: Blank Screen After Xubuntu Loads
Jan 18, 2010
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
imac g3 power pc screen goes blank and the power button goes orange after kubunto loads, but the computer is still running, how do i fix this problem, if you have any information please be very spesific i have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if i hit enter but the screen still stays blank)
finally just got ubuntu to install on my emac a1002, I had to use the powerpc version. The install went fine, it restarted and loaded ubuntu, but after it loads goes to a blank black screen. And I imagine it sits there forever, yet I've only left if for about 5mins or so. The emac is from 2003, and has a 1ghz processor (Powerpc) and has 256mb ram.
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
This is my first thread so bear with me. I have an Apple ibook 3G with a 500mhz ppc processor and 384MB of Ram that used to run OSX 2.8 but I am trying to install linux on it. I want to install Ubuntu or Xubuntu on it because I have been a Ubuntu user for a couple of years and I love it. But when I tried to install them my screen does funky things. The screen only fills up part of the screen and then there is like a partial mirror image of the screen on bottom of that screen and i think its something to do with the graphics config because I installed Yellow Dog Linux on it and it worked for a while and then does the same thing so I know its not the screen its self. I hope to get a few pics of it soon. But I was wondering if anyone has had the same problem or knew how to fix it.
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
I have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
I am running karmic on a MBP 5,2. When I close the lid, nothing happens. The screen does not blank, machine does not sleep... nothing. I thought I performed all the steps in the sticky, and I didn't see anything special regarding power management. The power management tool does not list any settings for lid closed.
im running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
I installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
I just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
Whenever I power on my Xubuntu machine, GRUB does not load until I reboot. Once the system is running, I can reboot back into Xubuntu but if I power down GRUB does not seem to load. I've got the system to power on at 8am every morning but the fact that I have to reboot it is really annoying me.
Update: Reinstalled GRUB to the master boot record of my first hard disk and it solved everything. I had to follow the second part of this guide to get it to work: http://ubuntuforums.org/showthread.php?t=224351
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
I just installed Xubuntu on my old iMac G3 and I booted it and when I try to log in it says "Authentication Failure" I'm 99.9% positive I'm using the right username/psswrd, does anybody know how to change it or over ride the login part all together?
I have an early 17" imac G5 PPC, only 512mb RAM. Been looking at the PPC linux distros available, and xubuntu 10.04 looks good, does anybody run here on an old Imac? Will just be a backup pc.
I have eight iMac G3's that work. I've never had a mac before, and I'm not interested in anything the mac OS has to offer. I want to totally delete it, and put JUST xubuntu on these computers. I know nothing about Mac, except I got these, and they have pretty colored housings. I've tried using the 'c' and 'apple+c' commands to get this to boot from the xubuntu cd, but it doesn't have any effect. The thing just continues to load OS9.
I'm seeing from all these threads that everyone is pretty much dual booting, or multi-partitioning the hdd. I do NOT want to do this. Is it possible to format the drive completely, so that it is utterly blank, and then install xubuntu? Am I going to have to get new hdd's for them? They all work just fine, no problems except the software is so old that you can't do anything with it but use post it notes.
I just installed Xubuntu 9.10 on my iMac and it works perfectly...except for one thing. It is stuck in 8 or 16 bit color and I can't find a way to make it millions of colors. I've tried using the xorg.config...
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
When I load Ubuntu, it goes to the desktop screen, shows my desktop picture, loads Pidgin which I have set to start on startup, loads Icons, and then the screen goes black. The mouse cursor shows up, I can move it around, and then it goes black again, and the mouse cursor shows up again. This repeats a few times until the cursor freezes. This started happening after I tried fixing a bug with new drivers for my Intel 845gl video card. The instructions I followed are these:
Code: To use the available fix, run the following commands: pt-add-repository ppa:glasen/855gm-fix apt-add-repository ppa:brian-rogers/graphics-fixes apt-add-repository ppa:glasen/intel-driver aptitude update aptitude install linux 855gm-fix-dkms aptitude dist-upgrade ,taken from here.
I have tried some of the options in recovery mode from GRUB menu, none really work, except booting with default graphic configuration, or something similar like this.
I recently installed Ubuntu on my Powerbook G4 1.6ghz 13". The install went fine along with the first boot off the harddrive. The problem came when I started the computer for the second time. X starts but the display comes up blank. To be sure I didn't mess up the install I reinstalled Ubuntu and installed all the updates and proprietary drivers as well as setup remote desktop options. I can now start the computer and get a remote desktop but nothing on the computer's display. I've tried to edit the xorg.conf but X has not created one. I'm at a loss of what to try next.
I have 2 computers with kubuntu 8.10 using vinagre for my remote desktop viewer and x11nc for my server and I am trying to connect remotely through the command line from one computer to login to the startup screen in the other computer. Is this possible, since it looks like my server does not start until after I log in to my desktop screen?
When I boot my pc it used to take me to a prompt which asked which OS I would like to boot. Today randomly, some grub rescue menu came up. I read online that that meant I had to fix my grub menu, which I did. Now a regular grub menu pops and and I have no idea what to do with it. Whats a grub menu? How can I just get back to my regular boot screen? I run dual boot xp and ubuntu, is grub a program of xp or ubuntu? I have no idea what this grub menu is and whats going on with my pc!
just installed ubuntu on my win 7 laptop using the wubi.. after the install it said restart,so i restatred and booted up ubuntu which went sound,it then says finishing installation.. ubuntu comes up does the partions then started copying files then once it had done this the screen went black with loads of writing on it..it seems to just stay like this.. i left it 30 mins the restarted laptop again..laptop working sound booted ubuntu again and the same thing happened..
After entering runlevel 2 and gdm loads, I only get a black screen. I hear a beep that indicates gdm has loaded, but everything stays black. Trying to switch to a console using ctrl-alt-f1 does absolutely nothing.
At one point, I disabled gdm from starting in runlevel 2, and rebooted. I then typed into tty2 "sleep 60 ; reboot" and in tty1 "gdm" and hoped for a reboot if the graphical login didn't appear. No reboot occurred, my black screen remained.
I've issued acpi=off at kernel command line (from grub) and disabled all acpi services. That seemed to work for a few hours but now I get the black screen again every time. There's no option in the BIOS to switch from acpi to apm, so I've done all I can do on the software side of things.
I have a bad problem with debian 5.0 . I have installed it all right with no fail or error and when it boots,i just see a black screen with nothing else. My graphic card : Nvidia 9500M gs. I tried ubuntu,fodero but both of them were same after installing debian (Before i didn't have this problem)
There seems to be nothing in Preferences or anything, but after the other night, all new windows load in semi-full screen, where the File-Edit-etc menus are there, but the bar at the top isn't, and the taskbar at the bottom is covered by it. Its what happens with certain annoying ads, but now its any window.
