Ubuntu / Apple :: Blank Screen After Kubuntu Loads?
Jan 17, 2010
imac g3 power pc screen goes blank and the power button goes orange after kubunto loads, but the computer is still running, how do i fix this problem, if you have any information please be very spesific i have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if i hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
View 3 Replies
ADVERTISEMENT
Jan 18, 2010
my imac g3 power pc screen goes blank and the power button goes orange after Xubunto loads, but the computer is still running, how do I fix this problem, if you have any information please be very spesific I have no idea what im doing so include all steps, thanks to anyone who posts (if this helps the computer makes the drum roll noise if I hit enter but the screen still stays blank)
(xbuntu version -xubuntu-8.10-alternate-powerpc)
(system informaiton...
(powerPc G3 266MHz/512k catche/32mb/6gb HD/24x CD-ROM/rage Pro/6MB SGRAM)
View 9 Replies
View Related
Feb 3, 2010
I am trying to install kubuntu on my macbook. I am able to boot from the CD and install fine, but when I try to boot from the linux partition the cursor blinks for a while, then the screen goes blank.I have used the rEFIt partition utility, but when I try to reinstall the grub bootloader as described here: it says "sudo: grub: command not found"When it try "grub", it says:"The program 'grub' is not currently installed. You can install it by typing:sudo apt-get install grub"
View 4 Replies
View Related
Aug 31, 2010
finally just got ubuntu to install on my emac a1002, I had to use the powerpc version. The install went fine, it restarted and loaded ubuntu, but after it loads goes to a blank black screen. And I imagine it sits there forever, yet I've only left if for about 5mins or so. The emac is from 2003, and has a 1ghz processor (Powerpc) and has 256mb ram.
View 1 Replies
View Related
Mar 10, 2010
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
View 5 Replies
View Related
May 16, 2010
I have an imac 27'' i7 and cannot get to install ubuntu.
I always get a blank black screen when during installation even when I select the "safe graphic mode". During installation, the i get some multi-colored straits at some point and then nothing, it returns to the black screen.
I even tried to partition my hard drive with Gparted and got the same blank black screen even with the "safe graphic mode" option.
View 9 Replies
View Related
Feb 25, 2010
I am running karmic on a MBP 5,2. When I close the lid, nothing happens. The screen does not blank, machine does not sleep... nothing. I thought I performed all the steps in the sticky, and I didn't see anything special regarding power management. The power management tool does not list any settings for lid closed.
View 2 Replies
View Related
Mar 23, 2010
im running karmic on a macbook pro 5.4. everything worked fine for a couple of months until i upgraded yesterday. (apt-get upgrade) now i'm getting a blank (black) screen when booting right after the splash screen appears tough the system comes up propperly since i can connet using ssh. the xserver is up and running regarding to the logs. i can't even switch to a console (alt-crtl-f1) nor booting in single user mode. the screen gets black after the kernel boot and init starts.
View 5 Replies
View Related
May 17, 2011
I installed Ubuntu 10.10 alternate PPC on my iBook G4. I have to used this command upon installation or else it went to white screen which doesn't go away:
install video=ofonly
Installation went smooth till the end.
After reboot, it did prompt me to pick l or c, then yaboot screen appear. However, after I entered 'Linux' and hit Enter, nothing happened - blank screen.
View 9 Replies
View Related
Nov 25, 2010
I just purchased a new Mac Mini 2010 to replace my older Mac Mini 2006 Intel. The problem I am having is that when I boot Ubuntu from the MM 2010 CD-ROM the initial menu that allows you to select a language is displayed, but after that the screen goes blank and stays blank. I am using the HDMI port to DVI output and I am wonder if that could be a cause of the blank screen. Is there a boot command that I can use to allow Ubuntu to display with the HDMI port or other item I need to fix to get Ubuntu CD installer video display to work with my MM 2010?
View 1 Replies
View Related
Apr 26, 2011
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Feb 14, 2009
After the Suhosin-Patch, I can no longer load mythweb pages from my mythtv server. Checking the apache2 error.log yields the following.
PHP Code...
I noticed that this appears to be an old bug come back to life again, but the fix to it was never revealed.
View 3 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
Jul 28, 2011
I currently have kubuntu 11.04 on my laptop harddrive that is in an external enclosure. it is on the outside of the machine and connect to the computer via USB.It works fine on my windows machine and I love the fact I could also plug it into my kubuntu machine at home and use it as a regular harddrive too. Although my new job basically wants me to use a mac. Apparently you need something called an efi support on my grub so here are the questions:
Does kubuntu 11.04 have efi support on its grub i.e. can I plug my hard drive with my kubuntu on via USB to a mac and boot from there? If not how could I get one? Also does getting efi support make any difference when I plug it into my kubuntu machine at home? So can I back up my data as I used to?(by simply plugging it in)Could I still plug it into my windows machine as before and work if I get efi support?
p.s. If you have trouble with heavy laptops give external harddrives a go its like carrying an ultra light linux machine (with all your data in it)!
View 2 Replies
View Related
Jun 23, 2010
Having successfully installed kubuntu 10.04 on my Powermac G5 I was wondering if I can install os x and dual boot, there are plenty of tutorials around but all of them involve installing kubuntu on a system with os x already installed. If there is any danger of damaging Kubuntu then I will leave it as I really don't want to go through the hell of getting it working properly again! Also I have plenty of hard drives kicking about - would it be safer/easier to install os x on it's own hard drive? And if so how would things work with yaboot?
View 2 Replies
View Related
Feb 26, 2011
I have an Apple iBook (ancient I know) and whenever I boot from the Live CD (Kubuntu 10.10) it boots up in 800x600 (as far as I can tell that's what it is). This would be a problem however it simplely leaves a huge black column on the right side and has a partially duplicated desktop below it.
When I go to display settings it won't let me change to a higher resolution (1024x768 is what the iBook natively runs at).
This is an iBook G3.
View 9 Replies
View Related
Aug 29, 2010
When I load Ubuntu, it goes to the desktop screen, shows my desktop picture, loads Pidgin which I have set to start on startup, loads Icons, and then the screen goes black. The mouse cursor shows up, I can move it around, and then it goes black again, and the mouse cursor shows up again. This repeats a few times until the cursor freezes. This started happening after I tried fixing a bug with new drivers for my Intel 845gl video card. The instructions I followed are these:
Code:
To use the available fix, run the following commands:
pt-add-repository ppa:glasen/855gm-fix
apt-add-repository ppa:brian-rogers/graphics-fixes
apt-add-repository ppa:glasen/intel-driver
aptitude update
aptitude install linux 855gm-fix-dkms
aptitude dist-upgrade
,taken from here.
I have tried some of the options in recovery mode from GRUB menu, none really work, except booting with default graphic configuration, or something similar like this.
View 5 Replies
View Related
Jan 13, 2011
So I've got this old Apple with an nVidia chipset. Don't know much about Apples, but from random searches on google I think it's an imac g5.
Anyway when I install Kubuntu 10.04 it works until I update it, then the video dies. It looks as though the nouveau driver is being killed and nv put back in it's place, anyone have any remedies I might try?
View 2 Replies
View Related
May 9, 2010
I recently installed Ubuntu on my Powerbook G4 1.6ghz 13". The install went fine along with the first boot off the harddrive. The problem came when I started the computer for the second time. X starts but the display comes up blank. To be sure I didn't mess up the install I reinstalled Ubuntu and installed all the updates and proprietary drivers as well as setup remote desktop options. I can now start the computer and get a remote desktop but nothing on the computer's display. I've tried to edit the xorg.conf but X has not created one. I'm at a loss of what to try next.
View 9 Replies
View Related
Feb 17, 2010
I have 2 computers with kubuntu 8.10 using vinagre for my remote desktop viewer and x11nc for my server and I am trying to connect remotely through the command line from one computer to login to the startup screen in the other computer. Is this possible, since it looks like my server does not start until after I log in to my desktop screen?
View 8 Replies
View Related
Jan 23, 2011
When I boot my pc it used to take me to a prompt which asked which OS I would like to boot. Today randomly, some grub rescue menu came up. I read online that that meant I had to fix my grub menu, which I did. Now a regular grub menu pops and and I have no idea what to do with it. Whats a grub menu? How can I just get back to my regular boot screen? I run dual boot xp and ubuntu, is grub a program of xp or ubuntu? I have no idea what this grub menu is and whats going on with my pc!
View 2 Replies
View Related
Jul 15, 2011
just installed ubuntu on my win 7 laptop using the wubi.. after the install it said restart,so i restatred and booted up ubuntu which went sound,it then says finishing installation.. ubuntu comes up does the partions then started copying files then once it had done this the screen went black with loads of writing on it..it seems to just stay like this.. i left it 30 mins the restarted laptop again..laptop working sound booted ubuntu again and the same thing happened..
View 1 Replies
View Related
Dec 15, 2010
After entering runlevel 2 and gdm loads, I only get a black screen. I hear a beep that indicates gdm has loaded, but everything stays black. Trying to switch to a console using ctrl-alt-f1 does absolutely nothing.
At one point, I disabled gdm from starting in runlevel 2, and rebooted. I then typed into tty2 "sleep 60 ; reboot" and in tty1 "gdm" and hoped for a reboot if the graphical login didn't appear. No reboot occurred, my black screen remained.
I've issued acpi=off at kernel command line (from grub) and disabled all acpi services. That seemed to work for a few hours but now I get the black screen again every time. There's no option in the BIOS to switch from acpi to apm, so I've done all I can do on the software side of things.
[Code]...
View 3 Replies
View Related
Mar 29, 2010
I have a bad problem with debian 5.0 . I have installed it all right with no fail or error and when it boots,i just see a black screen with nothing else. My graphic card : Nvidia 9500M gs. I tried ubuntu,fodero but both of them were same after installing debian (Before i didn't have this problem)
View 3 Replies
View Related
Mar 5, 2009
There seems to be nothing in Preferences or anything, but after the other night, all new windows load in semi-full screen, where the File-Edit-etc menus are there, but the bar at the top isn't, and the taskbar at the bottom is covered by it. Its what happens with certain annoying ads, but now its any window.
View 9 Replies
View Related
Jan 2, 2011
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
Message:GNU GRUB version 1.98-1ubuntu5
View 4 Replies
View Related
Mar 20, 2011
I'm installing OpenSuse 11.4 to a HP DL180 G6 server, with no luck. I go through the installation process when booting up from the DVD, and when it finish and restarts in loads Suse and then goes to a black screen and doesn't respond.
View 9 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Jul 7, 2011
I have recently downloaded and installed Ubuntu 11.04 inside my copy of Windows. When I boot my laptop, I have the option to either boot in Windows or Ubuntu. When I boot in Ubuntu, I get the login screen all OK. But when the screen loads up, it is missing the top and left hand side navigation bars. It then appears to be trying to refresh itself (unsuccessfully) as after about 30 seconds the screen goes black and then the wallpaper image will come back, still without the navigation bars. This keeps on happening until I reboot the machine. The only way I can get the screen to reboot OK is to run the repair option on boot up.
I have notices that after the above has taken place and I have finally got the system to boot all OK by running the repair option, the system will not connect to my mobile broadband via the USB dongle. Not sure if they are related, but at this point they seem to be.
View 2 Replies
View Related
