SUSE :: ADSL Router (Ping - Kinternet) - Error: Cannot Read Real Interface For Eth-bus-pci-0000:04:00.0

Jul 19, 2010

recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that

status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0

I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.

View 6 Replies


ADVERTISEMENT

Ubuntu Networking :: D Link ADSL Router - Ping: Sendmsg: Operation Not Permitted

Jan 13, 2010

I use a wired Dlink Adsl Router GLB502T with its inbuilt dialer configured. Problem is it will not connect while computer is running.When I try to ping the local ip of the modem this is what I get "ping: sendmsg: Operation not permitted" and "/etc/init.d/networking restart" has no effect either.I need to restart my computer every time i want to connect to the Internet.I switch on the modem when the grub bootloader appears and the modem connects without any problem.This problem appeared when i installed Ubuntu 9.04.There was no problem with Ubuntu 8.04.

OS:Ubuntu 9.04
Motherboard: Asus M2N68-AM
NVIDIA Geforce 7025/nForce 630a
RTL8211CL Phy Gigabit LAN

[code]....

View 4 Replies View Related

Ubuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?

Apr 13, 2010

Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.

View 9 Replies View Related

Networking :: Set Up A Laptop As A Router To Connect Wirelessly To ADSL Router?

Nov 6, 2009

I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).

I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.

I have added this to /etc/sysctl.conf on the laptop:

net.ipv4.ip_forward=1

Then I tried this on the laptop:

sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT

This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.

But this doesn't work. The connection doesn't even establish between the laptop and the desktop.

View 12 Replies View Related

Server :: User Interface Error 3082462856:error:0906906F:PEM Routines:PEM_ASN1_write_bio:read Keyem_lib.c:382?

Oct 14, 2010

OpenSUSE 11.3, openssl was just updated with YAST (to see if there is any fix available but not)

# openssl version
OpenSSL 1.0.0 29 Mar 2010
# openssl -genrsa -des3 -out ca.key 4096

[code]....

View 2 Replies View Related

Networking :: Ping Connection To Router OK But No Ping Between Boxes In LAN

May 26, 2010

I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.

Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.

View 2 Replies View Related

Networking :: SSH Through ADSL Router?

Nov 1, 2010

1) I have an ADSL router for internet and RHL box sitting on the southside of the southside of the router with local IP configured.

I have to access the Linux box through the internet.

I have tried to port forward the SSH port on the ADSL router, that is not working.

View 6 Replies View Related

Ubuntu :: Failed Connect To ADSL Router

Mar 30, 2011

After reinstall Ubuntu 10.04 LTS didn't recognize my ADSL router Billion 400 G.The Ethernet 1 led is off after booting.Search on web for help on this but no good results.You good people now are my last resort.I tried boot in live CD and result is the some.Check with sudo lshw.

View 9 Replies View Related

General :: Router - Setting Up Bandwidth Throttling For ADSL?

Jul 4, 2010

I'm going to set up a new linux router for a company, and have to set up bandwidth throttling. They have an unlimited ADSL internet connection which will be shared between 2 businesses, one being them. I will need to set it up so their connection will never be slowed down by the other business. They will both be connected to the same NIC, but will be on different subnets. How would I go about doing this?

View 2 Replies View Related

Ubuntu Networking :: Connect To Internet Using ADSL Router?

May 23, 2010

I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.

My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.

View 1 Replies View Related

Debian Configuration :: ADSL - Router Should Handle Everything Automatically And Transparently

Feb 3, 2010

The router should handle everything automatically and transparently. All you need to do is make sure that the wireless Ethernet adapters in the laptops can "talk" to the wireless router.

View 4 Replies View Related

Ubuntu Networking :: Difference Between An Adsl Router And An Ethernet Modem?

Dec 20, 2010

not *buntu related but what is the difference between an adsl router and an ethernet modem?

View 5 Replies View Related

Networking :: Debian Router, 2 NIC, Traverse Viking ADSL+ Card?

Jan 6, 2010

Since this is my first post, before i describe my problem, i'd like to say regrats to all of you for maintaining here such a good support community.

So, here we go: I have a headless Debian box and i want to set it up as a small office router/gateway. On the box i installed a regular NIC and a Viking Traverse ADSL+ Card which gets recognised by the OS as an 8139 ethernet card and has an embedded ADSL+ modem. The modem is accesible through the PHY interface once it gets assigned an IP. Having said that here is the actual setup:

eth0 : Viking Card
eth1 : NIC (this NIC is connected to a switch)
eth0 : 192.168.1.2 (internal modem is on 192.168.1.1)
eth1 : 192.168.1.3
/etc/network/interfaces

[Code]...

View 1 Replies View Related

General :: Connect To The Internet With A Smartax Mt880 Adsl Router?

Feb 28, 2010

i need to connect to the internet with my huawei smartax mt880 adsl router from a linux redhat 9 box ,

- I can get into the router as user admin / admin at address 192.168.1.1

- I get missed in between pppd setup & my kernel modules insertion . . .

- can I find a clear step by step guide to get me connected to the internet ?

View 2 Replies View Related

Ubuntu Networking :: Belkin F5Z0142uk Enhanced Wireless ADSL Router Kit

May 13, 2010

Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]

View 2 Replies View Related

Networking :: Which Current Model ADSL Modem Router For DD-WRT - OpenWRT Or Tomato?

Mar 25, 2010

What are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?

View 4 Replies View Related

Networking :: Print AND Real-time Output Of PING Command ?

May 3, 2011

Let's say I am pinging a host, and want to output to a file each reply and its timestamp of when this started.

I know that it can be done with a loop and a shell script. Something like this

DO

echo "$(date)" >> results.txt ###includes the time and outputs results to txt###
ping -c 4 HOST >> results.txt ###a total of 4 pings at a rate of 1 per second###

REPEAT UNTIL USER PRESSES CTRL-C

Now, my first issue is that I need to be able to see results real-time as well.

Is there a way one can print to BOTH a screen and output? If one uses the ">>" command, it is essentially sending everything to the file. Running another ping command in parallel is not an option.

View 3 Replies View Related

OpenSUSE Hardware :: Connected To A Fast Ethernet Switch Or Directly Into The ADSL Router?

Jan 5, 2010

Using SuSE 11.2 can anybody suggest a decent compatible Ethernet / Network Colour Printer. Just a printer not a multifunction device. The printer will be connected to a Fast Ethernet Switch or directly into the ADSL Router.

View 4 Replies View Related

OpenSUSE Network :: Router/adsl Modem Is Not Connected To A Power Supply - How To Connect It

Feb 5, 2011

My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?

View 5 Replies View Related

Ubuntu Networking :: Connect Only One PC At A Time To Adsl Router/modem For Internet Access?

Apr 1, 2011

I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.

Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).

View 5 Replies View Related

Software :: Code Real Time Graphs On A Web Interface?

Jun 24, 2010

how graphs can be plotted on a web interface on real time ? I have a web interface coded in PHP mostly and for graphs I have jpgraphs. But the job needs the graphs to be real time not static. As of now there's a server side program that writes onto a csv file. I read data from the file and plot it using jpgraph when the page loads. Is there anyway I can code real-time dynamic graphs on a web interface ?

View 2 Replies View Related

OpenSUSE Network :: Adsl Modem Acting As A Bridge To My Router Setup - Connection - Internet Went Slow ?

Jun 19, 2011

I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !

View 2 Replies View Related

General :: Turn A Computer Into A Real Safe Router?

Aug 16, 2011

I have an old hp that i installed ubuntu on and I was wondering how I can turn it into a real router. By real router I don't just mean broadcast the internet but use security software, configurations, and all the stuff normally found on a real router. What are the steps i need to take? I dont have 2 NIC's in it just one but I do have a wireless usb that I can just stick into it.

View 1 Replies View Related

Fedora :: Aic7xxx: Probe Of 0000:00:0a.0 Failed With Error -38

Aug 23, 2009

I just installed Fedora 11 on an AMD CPU PC. I get the following error during boot up.Aug 22 21:42:07 dragon8 kernel: aic7xxx: probe of 0000:00:0a.0 failed with error -38 Because the aic7xxx has the error, it does not load the st module. I manually loaded the st module, but the /dev/st? devices do not get created, I assume because of the aix7xxx error.I can access the Adaptec AHA-2940W Bios during boot up and see the 2 tape drives that are connected to it.

View 2 Replies View Related

Slackware :: Error - NVRM: Xid (0000:02:00): 8, Channel 00000004

May 6, 2011

When I use mplayer (i.e. play a movie with it) the system will sporadically freeze completely, for around 13 seconds. Everything halts as if the system is having a kernel panic or worse -- even the clock halts. Around 13 seconds pass, everything returns to normal (the clock then jumps 13 seconds ahead, as well), and from the kernel pool log (dmesg) I observe this:


Code: NVRM: Xid (0000:02:00): 8, Channel 00000004 This seems to happen at sporadic time intervals, but can happen as often as every two minutes at "worst", making watching a movie clip the most annoying experience you can imagine.

I have tried to update the graphics drivers to the latest version, to no avail. I also have no idea how this issue started in the first place. I use Slackware 13.1.0 on a fast x86 (4.1 GHz Core i7, 6 GiB RAM, SSD, GTX480, etc.). There are no other known issues with the system. I don't use any sort of package managers or automatic updates. This issue happens regardless of whether the media played is physically local on the computer, or if it is on a network.

View 6 Replies View Related

Networking :: Cannot Ping Wireless Router Or Access Router Settings - Wireless ?

Jun 9, 2010

I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.

I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.

So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?

Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.

We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.

View 1 Replies View Related

Debian Configuration :: Amd64_edac: Probe Of 0000:00:18.2 Failed With Error -22

Mar 2, 2011

OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,

/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed

[code]....

View 2 Replies View Related

General :: How To Read File In Real Time

Jan 3, 2011

I have a log file that I would like to examine during some changes under process that writes to this log.
Is there some way to open this file and read in real time changes written to it ?

View 5 Replies View Related

Fedora Hardware :: ERROR : Radeon 0000:01:05.0: DVI-D-1: EDID Block 0 Invalid

Dec 27, 2010

I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.

This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.

[Code]....

View 2 Replies View Related

Ubuntu :: [325766.792025] Ehci_hcd 0000:01:07.2: Port 9 Resume Error -19

May 4, 2011

Hi, I usually use Debian which doesn't have this bug, so I hope Ubuntu users will not if this could be fixed.

Ubuntu version:
Ubuntu 10.04.1 LTS
kernel version: 2.6.32-24-generic

So problem is no matter what device I connect to USB, after some time in dmesg errors are generated which bring load of one core to 100%. These errors are generated in dmesg:

Code:

[325766.792025] ehci_hcd 0000:01:07.2: port 9 resume error -19
[325766.803033] hub 2-0:1.0: hub_port_status failed (err = -32)
[325766.814086] hub 2-0:1.0: over-current change on port 10
[325766.928027] ehci_hcd 0000:01:07.2: port 10 resume error -19

[code]....

I found solution for Ubuntu which says to get this working I should disable USB 2.0 which is not really acceptable for me.[URL]

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved