Slackware :: Error - NVRM: Xid (0000:02:00): 8, Channel 00000004
May 6, 2011
When I use mplayer (i.e. play a movie with it) the system will sporadically freeze completely, for around 13 seconds. Everything halts as if the system is having a kernel panic or worse -- even the clock halts. Around 13 seconds pass, everything returns to normal (the clock then jumps 13 seconds ahead, as well), and from the kernel pool log (dmesg) I observe this:
Code: NVRM: Xid (0000:02:00): 8, Channel 00000004 This seems to happen at sporadic time intervals, but can happen as often as every two minutes at "worst", making watching a movie clip the most annoying experience you can imagine.
I have tried to update the graphics drivers to the latest version, to no avail. I also have no idea how this issue started in the first place. I use Slackware 13.1.0 on a fast x86 (4.1 GHz Core i7, 6 GiB RAM, SSD, GTX480, etc.). There are no other known issues with the system. I don't use any sort of package managers or automatic updates. This issue happens regardless of whether the media played is physically local on the computer, or if it is on a network.
View 6 Replies
ADVERTISEMENT
Oct 13, 2009
When I try to install something with KPackage, I get an error like the following:
error: Unable to create channel for file: <filename>
where filename is usually the tgz file I'm installing from. I can't find any references to this anywhere - any have any idea what it's telling me, and how to solve? A specific example is Wine - it gives this error:
error: Unable to create channel for file: /usr/local/src/wine-1.1.24-i486-1kjz.tgz
I'm running this as root in xfce. Running it as a regular user, after giving root password, gives the same result.
View 2 Replies
View Related
Jan 9, 2009
I installed kmod-nvidia-96xx-2.6.27.9-73.fc9.i686-96.43.09-1.fc9.6.i686 yesterday. After rebooting, the X server started correctly, but at the welcome login screen, my screen goes black for a bit whenever anything on the display changes. After logging in, the problem remains, plus my text is somewhat garbled.There are no error messages in /var/log/Xorg.0.log. The only error messages I could find were in /var/log/messages:
kernel: NVRM: Xid (0001:00): 8, Channel 00000000
kernel: NVRM: Xid (0001:00): 13, ...
kernel: NVRM: Xid (0001:00): 3, C ...
[code]....
View 1 Replies
View Related
Aug 23, 2009
I just installed Fedora 11 on an AMD CPU PC. I get the following error during boot up.Aug 22 21:42:07 dragon8 kernel: aic7xxx: probe of 0000:00:0a.0 failed with error -38 Because the aic7xxx has the error, it does not load the st module. I manually loaded the st module, but the /dev/st? devices do not get created, I assume because of the aix7xxx error.I can access the Adaptec AHA-2940W Bios during boot up and see the 2 tape drives that are connected to it.
View 2 Replies
View Related
Mar 2, 2011
OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,
/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed
[code]....
View 2 Replies
View Related
Dec 27, 2010
I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.
This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.
[Code]....
View 2 Replies
View Related
May 4, 2011
Hi, I usually use Debian which doesn't have this bug, so I hope Ubuntu users will not if this could be fixed.
Ubuntu version:
Ubuntu 10.04.1 LTS
kernel version: 2.6.32-24-generic
So problem is no matter what device I connect to USB, after some time in dmesg errors are generated which bring load of one core to 100%. These errors are generated in dmesg:
Code:
[325766.792025] ehci_hcd 0000:01:07.2: port 9 resume error -19
[325766.803033] hub 2-0:1.0: hub_port_status failed (err = -32)
[325766.814086] hub 2-0:1.0: over-current change on port 10
[325766.928027] ehci_hcd 0000:01:07.2: port 10 resume error -19
[code]....
I found solution for Ubuntu which says to get this working I should disable USB 2.0 which is not really acceptable for me.[URL]
View 5 Replies
View Related
May 11, 2010
What can be the cause of this error.
dmesg | grep -i time
ACPI: PM-Timer IO Port: 0x408
Calibrating delay using timer specific routine.. 4658.19 BogoMIPS (lpj=2329098)
Using local APIC timer interrupts.
[code]....
View 7 Replies
View Related
Jul 19, 2010
recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
View 6 Replies
View Related
Jun 1, 2011
i have an error on my ubuntu 10.10 server which kinda annoying, below is the error:
firewall kernel: [ 1814.159992] skge 0000:01:0d.0: PCI error cmd=0x157 status=0xc2b0
it keeps on coming. but ICS is ok without any problem just this error
View 2 Replies
View Related
Jan 5, 2011
I recently installed slackware-current (not the most recent one) and since then I have not been able to get airmon-ng to set the channel of my network card correctly. I don't think it's a driver issue because the kernel from my previous install was the same as the current kernel (2.6.35.7) and it worked fine on my Atheros AR9285 Wireless card. Now every time I try to deauthenticate, it says the card is in channel -1 and won't work. One of the differences now is that I ran netconfig (I never ran this before). Sometimes when I run it, it complains about dhcpcd service.
View 10 Replies
View Related
Feb 16, 2010
I installed an Asus P7P55D PRO motherboard and now I can't mute Master channel with alsamixer, even not using KDE mixer. Probably ALSA doesn't support properly, despite I upgraded alsa libraries (alsa-lib-1.0.21a). The key to increase or decrease the volume through keyboard works fine, but the key for mute is not working. These are the alsamixer values:
Card: HDA Intel
Chip: VIA ID 444
I also used alsaconf command and it detects a snd-hda-intel board. I have a G15 keyboard and I even tried to make a shortcut with KDE mixer, but it doesn't work. Is there any way to solve it or have I to wait for a new version of alsa? I use Slackware64 13.0 with kernel 2.6.32.7.
View 8 Replies
View Related
Jan 29, 2011
I'm trying to authenticate with github, however when I try to:
Code:
I've done all the steps mentioned here: http://www.linuxquestions.org/questi...el-0-a-676673/
ie:
Code:
I also restarted sshd. This gave me the following error:
Code:
I found ponce's post about it so I assume it's not an issue. Sshd is running.
View 1 Replies
View Related
Jun 25, 2011
PC seems to run fine in single channel mode but monitor reports no input in dual channel mode and memtest86+ lists from 1-3 errors per pass in single channel mode. Motherboard (Gigabyte P43T-ES3G) can't be set for the 1.65 volts required by the RAM (2x2 of OCZ3P1333LV4GK PC3 10666). The mobo voltage choices are 1.6 or 1.7 volts. I have tried both and increased the MCH voltage from 1.1 v to 1.2 v, but so far can't get it to run in dual channel mode at all and single channel mode seems to run fine but I still get errors in memtest86+. Also tried optimized Bios settings and loosened memory timings (from 7-7-7-16 to 8-8-8-27 and tRFC 60 to 70) and reset Command Rate from 0 to 2. CPU is Core 2 Quad @ 2.4 Ghz, PSU is rated at 400 watts, Video card is Gigabyte GT220.
View 2 Replies
View Related
Jun 29, 2011
I'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies
View Related
Jul 14, 2011
Thinking about building a new system, with 4GB of DDR3 RAM. I am just wondering, which would you prefer: Dual-channel DDR3 or Quad-channel DDR3? Does one have better speed performance over another? Will one way keep your system cooler?
View 2 Replies
View Related
Nov 7, 2010
I have random X freezes (suddenly keyboard and mouse stop to react). Xorg.O.log is error and warnings free. The only problems I see in syslog/ dmesg are related to ACPI.
I have Asus P5E3 Deluxe motherboard. Slackware 13.1
Linux vareg 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
Code:
Code:
I ahve also today upgraded my BIOS to 1303 version. Still no difference.
View 14 Replies
View Related
Jan 23, 2010
I have a Sweex USB webcam which I am trying to setup with ZoneMinder, however I cannot find the settings for it, and when I run:
Code:
I get:
Code:
Code:
Provide settings, or how to fix ZMU?
View 5 Replies
View Related
Jun 19, 2010
My laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP
last sysfs file:
CPU 0
odules linked in:
Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N
RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
View 3 Replies
View Related
May 18, 2011
Slackware 13.37
Trying to manually set a frequency/channel for my wlan0 device, but it seems not to be working.
"iw wlan0 set channel 1" doesn't take any effect on wlan0 frequency, no matter if it's after a reboot (no frequency defined) or after a successful connection with an AP (with a given frequency already defined)
Code:
root@ECRNT-10:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.437 GHz Tx-Power=15 dBm
[Code]....
View 8 Replies
View Related
Jan 25, 2010
Please see below:
vim ~/.bashrc
umask=0000(bottom line)
source ~/.bashrc
But when I relogin, default umask was still 0022. How could I do ?
View 1 Replies
View Related
Nov 11, 2010
I write the below sample program named "h1.asm"?
Code:
assume cs:code
code segment
mov ax,0B800H
[code]...
1. In Windows platform +MASM 5.0, run "command" and use "debug.exe" to see what would happen. As step by step check, I see B800:000 is not modified as expected.
2. In Ubuntu 10.04 + dosemu 1.4.0.1, run the program in two ways:
a. If exec dosemu in command line as "$dosemu -dumb", yes, it's in shell mode. and then use debug to check, "B800:0000" can be modified as expected.
Code:
"Welcome to dosemu 1.4.0.1!"
D:masm>debug h1.exe
-r
AX=0000 BX=0000 CX=000F DX=0000 SP=0000 BP=0000 SI=0000 DI=0000
[code]....
b. If exec dosemu in command line as "$dosemu", and run the program again, the symptom is as same as 1.(pls see attachment picture).
3. In Windows, I replace "mov ax,0B800H" to "mov ax,2000H" and try again, it would be edited well. So I wonder if it is coursed by "B800" segment address.
View 5 Replies
View Related
Jan 19, 2011
after install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
View 6 Replies
View Related
May 7, 2010
What's up with this log message?
shpchp 0000:00:01.0: Cannot reserve MMIO region
After grub loads I get a flashing cursor then I get this message on the screen.
This is what I found in dmesg:
shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
shpchp 0000:00:01.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
I'm running an AMD laptop With Lucid x86_64, a custom install I did off the alternate iso with onlyLXDE installed.
All my hardware works fine and this just seems like some sort of bug.
Is there anyway I can silence all kernel messages at bootup?
This is what I have in /etc/default/grub and it's not working to silence it.
GRUB_CMDLINE_LINUX_DEFAULT="loglevel=0 splash"
View 9 Replies
View Related
Feb 25, 2010
Lots of these in my dmesg, dont like that. Don't think it should be there. Don't know how to get rid of it. What i do know is:
It's intel graphic card related on Ubuntu 9.10 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 i686 GNU/Linux On a EEEPC 1000H
View 5 Replies
View Related
Jun 2, 2010
I've just recently installed the latest version of fedora on my machine. I already had win7 64-bit so I did a dual boot with the Fedora live CD using the "use largest amount of free space option"(I had intentionally left 30GB of unallocated space). The problem though is that fedora just keeps_crashing, at any point and very randomly. I didn't have this problem with ubuntu. Fedora can crash right after I initiate the boot sequence, or it can wait until the booting process starts, or the login screens shows up, sometimes it even lets my use the OS but invariably crashes. I've done numerous hard reboots which only seemed to worsen the matter, now I can barely get past login screen. This issue also happened on the live CD, but with perseverance I got fedora running on my computer.
There's an error message that shows up for a second or two right before the boot sequence is initiated, luckily(!) the system crashed at the moment it was showing and I was able to write it down :
pci 0000:01:00.0 : no compatible bridge window for [mem 0xfffe0000-0xffffffff pre f]
Here are my specs:
Intel p965 chipset (i heard this one didn't work well in previous fedora releases, maybe this is the problem?)
4GB DDR2 Ram
nVidia 8600 GTS graphic card
HDA Intel Integrated Soundcard
Intel core 2 duo E6400 processor.
View 14 Replies
View Related
Nov 23, 2010
i just upgraded to 10.10 thru update manager, had problems upgrading, had to disable Nvidia - nouveau to upgrade and everything went well for 5 days but then i disabled backports in software sources then i changed visual affect from normal to extra and turned computer off. NOW i cant use ubuntu it just freezes on the purple ubuntu screen prior to login.have tried using safe mode and repair broken packages, which did a 21mb update but still nothing but freeze. i get this message in safe mode
23.4618531 [drm] nouveau 0000:01:00:0: couldn't find matching script table
24.514673 " "
24.514696 " "
24.752897" "
i can follow terminal commands BUT thats all i dunno how to use terminal by myself
View 1 Replies
View Related
Sep 28, 2010
I get this access violation message when I try to run The Godfather in Wine.The Godfather is an audio file tagging and organization program. he message reads:
Exception EAccessViolation in module TheGodFather.exe at 00000000.
Access violation at address 00000000. Read of address 00000000.
The header says "Application Error" and my only option is an OK button which terminates the program. This is the output I get in the command line:
Code:
wine TheGodFather.exe
err:ole:CoGetClassObject class {00000514-0000-0010-8000-00aa006d2ea4} not registered
err:ole:create_server class {00000514-0000-0010-8000-00aa006d2ea4} not registered
err:ole:CoGetClassObject no class object {00000514-0000-0010-8000-00aa006d2ea4} could be created for context 0x5
[code].....
View 2 Replies
View Related
Jan 14, 2011
pls delete this post if I should not do this as it is included in [URL]..How do I recover from the 99 error when I start my system? I can only get to my Slackware by booting into it from the Slackware DVD.I have re-run lilo but I keep getting the 99 error on start up.
View 10 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related