Fedora :: Aic7xxx: Probe Of 0000:00:0a.0 Failed With Error -38
Aug 23, 2009
I just installed Fedora 11 on an AMD CPU PC. I get the following error during boot up.Aug 22 21:42:07 dragon8 kernel: aic7xxx: probe of 0000:00:0a.0 failed with error -38 Because the aic7xxx has the error, it does not load the st module. I manually loaded the st module, but the /dev/st? devices do not get created, I assume because of the aix7xxx error.I can access the Adaptec AHA-2940W Bios during boot up and see the 2 tape drives that are connected to it.
I am trying to use a rig with Gigabyte GA-880GA-UD3H mother board and Intel 82574L based NIC (EXPI9301CTBLK) under CentOS 5.5. Unfortunately I have issue with the NIC - during boot it fails to initialize:
[Code]....
I receive the same result with the original e1000e driver from the distribution, the latest elrepo driver and the latest driver from Intel site (as seen in the example). I have tried also 2.6.37 kernel version - with the same result. The adapter however works fine under Windows (MiniXP from Hiren's BootCD) and with Ubuntu 10.10 LiveCD.
I have a clean install of mythbuntu 10.10 and I am trying to get a DVB-T USB stick working for the last 2 weeks. Its a MobiDTV and it seems to have the same chipset/USB ID as EzCap_DVB_T_Stick. I followed the instructions on the [URL] and eventually got the driver compiled (I had to amend some code, change "Bool" pointers to "bool" and add a FIRMWARE MAX_NAME 30 constant). I also copied the af9035 FW file to the firmware directory.
lsusb: Bus 002 Device 004: ID 15a4:1001 Afatech Technologies, Inc. AF9015/AF9035 DVB-T stick but it is not working; probe is failing: dmesg: [ 105.104195] DRIVER_RELEASE_VERSION : v2.0-1 [ 105.104203] FW_RELEASE_VERSION : v8_8_52_0 [ 105.104209] API_RELEASE_VERSION : 200.20081203.0 [ 105.110713] [Device_init] Error 1 [ 105.110733] dvb_usb_af903x: probe of 2-5:1.1 failed with error 9
I bought the hardware with Windows 7 MCE in mind. I have no Windows 7 disk so I installed Mythbuntu on it to see if build was solid and now I don't want Windows any more.
from where I infer that the module is correctly loaded though. Do you guys know what is the -1 error code? is there any way I could check if the coprocessor is currently working?
I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.
This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.
I am having trouble upgrading from old grub to grub-pc. I have a clean install of 9.10 on a system with a new ASUS motherboard with Nvidia RAID configured as RAID 0.Although I read the page on SATA pseudo-RAID, this doesn't seem to apply, as both 9.10 and Windows XP installed cleanly without any additional drivers required.I did notice that contrary to the documentation, 9.10 installed with grub v0.97, not the new one as claimed. It is working fine, but just to be ornery, I'm trying to upgrade to the new one, and this is where I ran into trouble.Whenever I try to run grub-upgrade, I get an error from grub-probe that 'no mapping exists for' my raid partition. Apparently grub-probe can deal with the device, but not with the fs_uuid, as follows:
twescott@latitude:~$ sudo grub-probe -t device /boot/grub /dev/mapper/nvidia_fcacbeib5 twescott@latitude:~$ sudo grub-probe -t fs_uuid /boot/grub grub-probe: error: no mapping exists for `nvidia_fcacbeib5'
The system seems to be recognizing the RAID with no problems, as in:
When I use mplayer (i.e. play a movie with it) the system will sporadically freeze completely, for around 13 seconds. Everything halts as if the system is having a kernel panic or worse -- even the clock halts. Around 13 seconds pass, everything returns to normal (the clock then jumps 13 seconds ahead, as well), and from the kernel pool log (dmesg) I observe this:
Code: NVRM: Xid (0000:02:00): 8, Channel 00000004 This seems to happen at sporadic time intervals, but can happen as often as every two minutes at "worst", making watching a movie clip the most annoying experience you can imagine.
I have tried to update the graphics drivers to the latest version, to no avail. I also have no idea how this issue started in the first place. I use Slackware 13.1.0 on a fast x86 (4.1 GHz Core i7, 6 GiB RAM, SSD, GTX480, etc.). There are no other known issues with the system. I don't use any sort of package managers or automatic updates. This issue happens regardless of whether the media played is physically local on the computer, or if it is on a network.
So problem is no matter what device I connect to USB, after some time in dmesg errors are generated which bring load of one core to 100%. These errors are generated in dmesg:
Code:
[325766.792025] ehci_hcd 0000:01:07.2: port 9 resume error -19 [325766.803033] hub 2-0:1.0: hub_port_status failed (err = -32) [325766.814086] hub 2-0:1.0: over-current change on port 10 [325766.928027] ehci_hcd 0000:01:07.2: port 10 resume error -19
[code]....
I found solution for Ubuntu which says to get this working I should disable USB 2.0 which is not really acceptable for me.[URL]
dmesg | grep -i time ACPI: PM-Timer IO Port: 0x408 Calibrating delay using timer specific routine.. 4658.19 BogoMIPS (lpj=2329098) Using local APIC timer interrupts.
recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
I have kuduz installed but am wondering if there is a way to probe hardware with Fedora without having to reboot? Ioscan command is not found in my terminal and I can't find it in my Package Manager or a RPM search. A GUI version would also be of interest but not mandatory.I'm a Mandriva defector that is wheening off of Drake Tools.
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
I've just recently installed the latest version of fedora on my machine. I already had win7 64-bit so I did a dual boot with the Fedora live CD using the "use largest amount of free space option"(I had intentionally left 30GB of unallocated space). The problem though is that fedora just keeps_crashing, at any point and very randomly. I didn't have this problem with ubuntu. Fedora can crash right after I initiate the boot sequence, or it can wait until the booting process starts, or the login screens shows up, sometimes it even lets my use the OS but invariably crashes. I've done numerous hard reboots which only seemed to worsen the matter, now I can barely get past login screen. This issue also happened on the live CD, but with perseverance I got fedora running on my computer.
There's an error message that shows up for a second or two right before the boot sequence is initiated, luckily(!) the system crashed at the moment it was showing and I was able to write it down :
pci 0000:01:00.0 : no compatible bridge window for [mem 0xfffe0000-0xffffffff pre f]
Here are my specs:
Intel p965 chipset (i heard this one didn't work well in previous fedora releases, maybe this is the problem?)
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
I have wordpress server running on my machine and I have SELinux enabled for enforcing/targeted. I am unable to insert images, music, etc from the add new post field on the wordpress dashboard. I receive the following error:
image.jpg has failed to upload due to an error The uploaded file could not be moved to /var/www/html/wordpress/wp-content/uploads/2010/10. When I disable SELinux completely, it works fine. Does anyone know what Boolean I need to check to resolve this issue?
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
My laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP last sysfs file: CPU 0 odules linked in: Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.
I do have a little problem with abcde under fedora 14 when trying to tag m4a files. When I'm ripping a cd and telling abcde to (also) encode and tag m4a (aac) files I always get the following error just when the tagging starts: nice: /home/ThomasM/Musik/abcde.910a8d0c/track12.m4a: Keine Berechtigung [ERROR] abcde: The following commands failed to run: tagtrack-m4a-01: returned code 126: nice -n 10 /home/ThomasM/Musik/abcde.910a8d0c/track01.m4a --artist Jeff Rayo --album Vamos Reggaeton --title Matame --tracknum 01 --year 2005 --genre Latin --compilation true --comment --utput /home/ThomasM/Musik/abcde.910a8d0c/track01.m4a-atomic
the trackxx.m4a files are all available and I of course have authority to access them, playing them for example does not fail and I also can delete them. searching the internet i found in another internet forum that there might be missing atomicparsley which shall be used by abcde for tagging m4a files. Unfortunately I can't find it in the repositories.
My fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
I'm running Fedora 11: kernel Linux 2.6.30.9-96.fc11.i586 Gnome: 2.26.3
Trying to install orkaudio using the instructions here: [URL] When I get to rpm -i ACE-5.4.8-1.i386.rpm I get: error: Failed dependencies: libcrypto.so.4 is needed by ACE-5.4.8-1.i386 libssl.so.4 is needed by ACE-5.4.8-1.i386
I've also tried system/administration/add/remove software but no joy. if I do # yum install openssl I get: Loaded plugins: refresh-packagekit Setting up Install Process Package openssl-0.9.8k-5.fc11.i686 already installed and latest version Nothing to do
I am pretty new to linux, I was trying to install vnc enterprise edition (x64) but was getting the following error message:
"error: Failed dependencies: libX11.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libXext.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libXtst.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libc.so.6(GLIBC_2.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libcrypt.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libdl.so.2()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libdl.so.2(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1(GCC_3.0)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libgcc_s.so.1(GCC_3.3)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libm.so.6()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libm.so.6(GLIBC_2.2.5)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5()(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(CXXABI_1.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(GLIBCPP_3.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64 libstdc++.so.5(GLIBCPP_3.2.2)(64bit) is needed by vnc-E-4.5.21561-1.x86_64"
I'm new to Linux and am trying to install libcurl to use in my c++ code on my fedora 14 system. I went to the libcurl site and downloaded the binary package for Redhat Linux 7.2 on i386. There was no download for Fedora.It was an .rpm package and so I used rpm -i libcurl4-7.21.7-1.i386.rpm to install it.
I received the following errors: error: Failed dependencies: libcom_err.so.3 is needed by libcurl4-7.21.7-1.i386 libcrypto.so.2 is needed by libcurl4-7.21.7-1.i386 libgdbm.so.2 is needed by libcurl4-7.21.7-1.i386 liblber.so.2 is needed by libcurl4-7.21.7-1.i386 libldap.so.2 is needed by libcurl4-7.21.7-1.i386 libsasl.so.7 is needed by libcurl4-7.21.7-1.i386 libssl.so.2 is needed by libcurl4-7.21.7-1.i38
Do I need to simply download these files? Or is it a problem of downloading the wrong binary package? If I do need to download them then from where?
---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------
Never mind, I just did a yum install libcurl and it worked out...... yum is pretty amazing.
