OpenSUSE 11.3, openssl was just updated with YAST (to see if there is any fix available but not)
# openssl version
OpenSSL 1.0.0 29 Mar 2010
# openssl -genrsa -des3 -out ca.key 4096
[code]....
I have a problem with Postfix, or rather with TLS
After this command :
My server responding :
I read about this, that this is a opennssl bug -
recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
I used the Center for Internet Security Benchmark for Apache Web Server v2.1 (January 2008) manual.
This is the guidelines I have to follow when installing and configuring Apache...So the problem arises when we get to page:28
Just after running this command: openssl x509 -in url | more
We get this error:unable to load certificate 31352:error:0906D06C:PEM routines:PEM_read_bio:no start lineem_lib.c:650:Expecting: TRUSTED CERTIFICATE
I am configuring my Apache Server to enable checking CA Revocation List, and my Configuration lists as following :
Code:
SSLCARevocationFile /etc/httpd/confi.d/ssl.crt/CRL1.crl
But the server can not start, and the log says:
Code:
Unable to configure X.509 Storage for certificate
If I try this command to view content of my CRL file :
Code:
openssl crl -text -in CRL1.crl -noout
the console shows :
Code:
error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib:647:Expecting: X509 CRL
I think there is something wrong with my CRL file, such as the file format.Is there any requirement to the CRL file? What can I do to enable this CRL file checking?
I am running a NFS share on a Debian Lenny server with to network interface.
Sometimes when booting the server the following messages i shown in syslog:
Code:
If the system is rebooted then NFS is functional again. I would like to know way this happens somtimes so i can repair it, anyone with an idea? Another thing is that i would like to bind the NFS service to a specific interface e.g eth1 is this possible?
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
Apache is run as www as is all the files/folders. People are uploading via FTP, scp, so the problem is if I chmod so everyone can read, then rsync as a user it works until new files are added which then my ; if rsync fails with a permission denied. Now I can add a chmod in the script so everyone can read, but since www can already read, I figured I would just change my script to use www. I added the ssh key to his authorized_keys file, but when I try to just ssh in I see this in the secure file;
server sshd[29539]: User www not allowed because account is locked
sshd[29539]: Failed none for invalid user www from ip port 54983 ssh2
Now I read a few places already saying I need to add a password to the account, etc. but before I jump and try all I read, 1st major one, will this now break apache? Will this affect any startup things, etc. and .... will that unlock that user for ssh in or is there another preferred method?
I don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
I changed my motherboard battery last night, and now get "Read Error" on booting to Ubuntu, on dual boot system. This is the most frustrating thing in an otherwise great operating system. It is the second time I have encountered this issue (last time was a change of power supply). I fixed it last time after three days of re-loading Grub2 and playing around Grub 2 updates, etc. Fixed it eventually, but as usual, no idea of what eventuality fixed it. I think I found a web page buried deep in the 'net, which talked about device.map. Do you think I can find it again - not yet - day 2 searching for the answer... This is what the grub script tells us:
[Code]....
I have just installed Ubuntu 10.04LTS however when I attempt to boot the HDD I get the following error message
Read Error
Thats it nothing else, I am able to boot a USB installed version of Ubuntu 10.04LTS no proble. I can boot a Live CD of the same version no problem but when I installed it to the hard drive it just seems to fall over. I've tried adjusting the boot order, putting the HDD first and removing everything else but no joy. Im a linux n00b so no idea what to do next apart from go back to windows.
I installed debian 5.0.4 server on a PC that has both IDE and SATA controllers. I used an IDE HD to install the OS. The input device was a USB DVD unit. The IDE drive showed as /dev/hda and the 4 SATA HDs showed as /dev/sda1, /dev/sda2, /dev/sda3 and /dev/sda4. After the OS was installed the reboot started which brought up an error: GRUB GRUB Read Error
I then disconnected the SATA HDs and rebooted successfully. So no PROBLEMS with just the IDE drive connected, grub works fine. If I reconnect the SATA HDs though grub fails with:
GRUB GRUB Read Error
The problem originated when the installation got to the GRUB implementation. Here the installer engine asked me If I wanted GRUB to be installed on the MBR, to which I said YES. The installer had listed the IDE drive (/dev/hda) before the SATA drives (/dev/sda, /dev/sdb, /dev/sdc, /dev/sdd). After the installation finished and the machine was restarted, BIOS looked at the SATA drives first could not find the grub stages and it displayed an "Read Error".
After realising what was happening I looked at the BIOS settings to see if the HD booting sequence could be altered. The BIOS did indeed list the 4 SATA drives first and the IDE HD last. BUT it would not let me alter the booting sequence. So I was stuck with what the BIOS doing. So I decided I take the IDE drive out and create a 20G partition on the first SATA to accommodate the OS. So now everything works OK.
I'm running RHEL 5. When using the GUI System>Administration>Users and Groups, I get the error: The user database cannot be read. This problem is most likely caused by a mismatch between /etc/passwd and /etc/shadow or /etc/group and /etc/gshadow. The program will exit now.
Some research showed that I need to use vipw and vigr respectively to find an inconsistency between these two sets, which I did - to make it easy I copied each from [vipw | vigr] to an excel file and did =exact(%1, %2). There are no inconsistencies.
[Code]...
I am a system administrator and i have configured squid server at the server side.Now i am facing a problem that these two websites are not accessible through squid transparent proxy server while they are accessible when changing the gateway.The websites are following:-
[URL]
This type of error message comes ERROR The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: * Read Error The system returned: (104) Connection reset by peer
I am trying to create my own yum repository in RHEL5 machine. for this i installed http server.
#createrepo /var/www/yum/
my /etc/yum.conf file configuration is:
[rhce1]
name=rhce1
baseurl=url
enable=1
gpgcheck=1
#yum -y install vsftpd
Repository rhce1 is listed more than once in the configuration
Setting up Install Process
Setting up repositories
http://192.168.142.135/yum/repodata/repomd.xml: [Errno 14] HTTP Error 404: Not Found
Trying other mirror.
Error: Cannot open/read repomd.xml file for repository: rhce1
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
I installed webmin on Debian apt-get install webmin. After installation following message came.
Code:
Setting up webmin (1.510-2) ...
Webmin install complete. You can now login to https://IP:10000/
as root with your root password, or as any user who can use sudo to run commands as root. So I infer that the installation was successful.
But when I do
Code:
http://IP:10000
I get following error
Code:
Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error.
I have installed webmin. I am configuring ldap server using webmin gui. when i try to add user by ldap user and group I get following error. Failed to save user; Failed to add user to ldap database; modification required authentication. I am new in ldap configuration and hope for best reply.
View 1 Replies View Relatedi am trying to setup a very basic samba share on RHEL.after editing smb.conf ,testparm output is ok,(though it shows STANDALONE SERVER.)the directive i have used are
workgroup=MYGROUP
hosts allow=192.168.0. //my network
[storage]
path=/var/ftp
[Code]...
why no matter what email I send to a user I get this error relay1 postfix/local[4023]: 75941291D4: to=<username@domainname.com>, relay=local, delay=0.14, delays=0.07/0.02/0/0.05, dsn=5.1.1, status=bounced (unknown user: "username")
View 2 Replies View RelatedI made a system in CentOS5.5. I used Tomcat6 and PostgreSQL. But I couldn't enter my system. There are some error. And I don't understand what kind of error this.
JDBCExceptionReporter.logExceptions(100) | SQL Error: 0, SQLState: null
JDBCExceptionReporter.logExceptions(101) | Cannot create PoolableConnectionFactory (FATAL: Ident authentication failed for user "postgres")
"postgres" is username.
Is anybody knows anything about this error message.
The thing is we have 2 servers one is bugzilla + proxy other is mailserver (internal)
The thing is when my dev team files any bug the bugzilla can't send mail to a user user@test.local.com
P.S:i am actually having problems since the sudden power cut and server restarts
the local mail server is having zimbra package installed
I've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.
Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG
I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies View Relatedi usually use the connect to server GUI under places in previous versions of ubuntu. I am not able to see the application in ubuntu 11.04
View 6 Replies View Relatedcups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ?
b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user)
c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
Where is the connect to server interface in Xubuntu that is present under places menu in ubuntu?
View 1 Replies View RelatedI have a Linux mail server (Fedora). This server was set up long before i joined this organization. Now I have these issues I would request assistance:
1. I am not able to access the Graphical User Interface(gui) on this machine. Startx does not work. I have also tried using combination keys alt+ctrl+f...keys but no progress. As a result am not bale to do some tasks.
2. The clamav that is on the machine has since become outdated. Efforts to update it to latest versions have failed. How do i get to update clamav and protect my system?
3. Because of not being able to access the gui as well as the inability to update clamav have led to my server apparently sending spam mail which in turn have led to my public ip being black listed in a number of sites. Now how can i secure this server so that it stops sending the spam mail and hence avoid future blacklisting?(NB am using postfix and the server sits behind a router which connects to the Internet)
4. I have observed that the server has some iptables rules set but everytime the server restarts the rules stop. I have to manually restart them again to run. How do I sort this?
