Using SuSE 11.2 can anybody suggest a decent compatible Ethernet / Network Colour Printer. Just a printer not a multifunction device. The printer will be connected to a Fast Ethernet Switch or directly into the ADSL Router.
View 4 Replies
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View Relatednot *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies View RelatedI have a computer with grub installed, and nothing else. I'd like to install Debian on it without having to burn a CD. (and I don't have any flash disks.) It has a nice ethernet card, and I have another computer right next to it with an ethernet card. I also have an ethernet cable. However, I don't have any router free which I can mess with for these purposes. As I've looked up, apparently modern Ethernet cards don't need crossover cables, normal cables will work for this type of connection.
I've tried several different "tutorials" on how to set up a netboot server, but
None of them are complete. All of them assume that you understand how DHCP works, and that you can do things like set up a dnsmasq server. I don't understand the DHCP protocol, with submasks and whatnot (I know that it is the protocol for assigning computer network addresses, and that's it), and I don't think I should have to in order to simply connect two computers. All of the tutorials give you incomplete configuration files, and ask you to fill in things which I don't understand, and for me it doesn't make sense to customize these settings, as I just want to connect them and I really don't care what ip address the TFTP server has or whatnot. All of these assume that you are going through a router. I am not. When I try googling for ways to directly connect two linux computers with an ethernet cable, I can't even find instructions, just more references to "you need crossover cables".
So basically, I have two computers directly connected by ethernet cables. Tell me what packages I need to install, what the contents of my configuration files should look like, and what, if any, commands I need to run in order that when I turn on my second computer, and select network boot, it will start up a minimal debian system.
EDIT: Hmmm, it looks like I actually have a linux kernel installed too, but no root filesystem (so no other programs besides busybox).
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedBecause of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedI have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedI am using this usb wifi adapter, it uses zd1211rw and it works fine if I connect it directly to the usb port, but if I add a cable (around 5mts) between the usb port and the usb plug, the device doesn't appear (I used iwconfig to check). The green light on the wifi adapter turns on but it doesn't blink like it does when connecting it directly without the cable. What could be happening?
I use the same cable + usb wifi adapter in windows, and it works fine, I can scan and connect without problems. When I use the cable, lsusb doesn't show the device neither, it does when connecting the adapter directly.
What must be done to mount an ext3 partition that's on another computer which is connected via utp crossover cable? I can't seem to figure this one out, though I've read somewhere that it can be done, and I'd like to know how.
View 2 Replies View Related1) I have an ADSL router for internet and RHL box sitting on the southside of the southside of the router with local IP configured.
I have to access the Linux box through the internet.
I have tried to port forward the SSH port on the ADSL router, that is not working.
Is there a way to make the (router's) USB port to work in OpenSUSE? I have a external HD were I would access files from when connected to the router with the shareport utility but it only works on windows. I was wondering if it could work in wine? And how could I do it?
And how can I make a network? I have never made a shared connection between computers. I don't know the correct term but I would like to share files with my brother and sister which I just converted from Ubuntu
After reinstall Ubuntu 10.04 LTS didn't recognize my ADSL router Billion 400 G.The Ethernet 1 led is off after booting.Search on web for help on this but no good results.You good people now are my last resort.I tried boot in live CD and result is the some.Check with sudo lshw.
View 9 Replies View RelatedI'm going to set up a new linux router for a company, and have to set up bandwidth throttling. They have an unlimited ADSL internet connection which will be shared between 2 businesses, one being them. I will need to set it up so their connection will never be slowed down by the other business. They will both be connected to the same NIC, but will be on different subnets. How would I go about doing this?
View 2 Replies View RelatedI'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
The router should handle everything automatically and transparently. All you need to do is make sure that the wireless Ethernet adapters in the laptops can "talk" to the wireless router.
View 4 Replies View RelatedSince this is my first post, before i describe my problem, i'd like to say regrats to all of you for maintaining here such a good support community.
So, here we go: I have a headless Debian box and i want to set it up as a small office router/gateway. On the box i installed a regular NIC and a Viking Traverse ADSL+ Card which gets recognised by the OS as an 8139 ethernet card and has an embedded ADSL+ modem. The modem is accesible through the PHY interface once it gets assigned an IP. Having said that here is the actual setup:
eth0 : Viking Card
eth1 : NIC (this NIC is connected to a switch)
eth0 : 192.168.1.2 (internal modem is on 192.168.1.1)
eth1 : 192.168.1.3
/etc/network/interfaces
[Code]...
i need to connect to the internet with my huawei smartax mt880 adsl router from a linux redhat 9 box ,
- I can get into the router as user admin / admin at address 192.168.1.1
- I get missed in between pppd setup & my kernel modules insertion . . .
- can I find a clear step by step guide to get me connected to the internet ?
Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies View RelatedWhat are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?
View 4 Replies View RelatedIn Jaunty, I was using the fast-user-switch-applet, which puts a menu on the panel to enable quickly switching between users. The package does not seem to exist in Karmic, however. A search of Ubuntu packages reveals versions for Hardy, Intrepid, Jaunty, and Lucid, but skips Karmic.
View 2 Replies View RelatedI use a wired Dlink Adsl Router GLB502T with its inbuilt dialer configured. Problem is it will not connect while computer is running.When I try to ping the local ip of the modem this is what I get "ping: sendmsg: Operation not permitted" and "/etc/init.d/networking restart" has no effect either.I need to restart my computer every time i want to connect to the Internet.I switch on the modem when the grub bootloader appears and the modem connects without any problem.This problem appeared when i installed Ubuntu 9.04.There was no problem with Ubuntu 8.04.
OS:Ubuntu 9.04
Motherboard: Asus M2N68-AM
NVIDIA Geforce 7025/nForce 630a
RTL8211CL Phy Gigabit LAN
[code]....
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
im trying to connect two computers on lan.One computer has: VMWare Workstation and has Opensuse 11.3 mounted in it.The other computer has: VMWare Player and has Opensuse 11.3 mounted in it.Both computers are connected to a switch with cables.I have followed this guide in both computers:Depanati singuri calculatorul!: Opensuse 11.3 - configure local networkin order to setup a network.In one computer, if i go to: Computer---Network---Network folder, i only see one machine. When in fact i could see both of them right
View 9 Replies View RelatedI was trying out the fedora live cd but I couldn't get my Internet to work. When I open firefox it always said server not kind no matter what I searched or put into the address bar:
I tried many different things but none o them worked
I am able to ping m router an I'm able to login to my routers page
I am also able to login to my modems page and it says connected to the Internet
I tried restarting the modem and the router but I still got the same problem
I also tried disabling the firewall but still had the same problem
I tried a command and I was able to receive packets from google.com, but It never went through in firefox
I also tried out a torrent (I had it saved on a USB) and it worked it was downloading fine
I am able to ping googles web page but I am not able to search anything.
In firefox preferences and in network proxy I tried many different proxy settings bit none o them worked I always get the message server not found. All this was done while connected directly with Ethernet cable modem and router but untried wireless and it didn't work either on the top right corner of the screen the network icon says auto eth0 active. I'm using fedora 12 livecd.
I have a network printer directly connected via ethernet cable to an Ubuntu netbook, but pinging the printer fails, giving "Host Unreachable". The network light on the ethernet socket is lit green, and there is nothing else cable-connected to the network - just a simple cable connection between the netbook ethernet socket and the Network printer (a HP Laserjet 4200n). Ping works fine if I plug the cable into a different machine (a Win XP box) and ping from there, so it's not a cable or IP address problem.
This sounds simple enough and should work, but I'm stumped. Clues, anyone?
I've been using Suse on my 7 year old computer for years but now have a shiny new Dell Inspiron 570 MT with AMD Athlon? II X4 630.I thought that I should try the 64 bit version of Suse 11.2 on the new machine and it now dual boots, but I have an ethernet problem.Yast tells me:NetLink BCM57788 Gigabit Ethernet PCIe (Not connected)BusID : 0000:02:00.0Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.I searched for 'eth' in dmesg output without success but found 'net' in this section:
[ 0.380308] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.380310] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380401] NET: Registered protocol family 2
[code]...
recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
I previously used SSH to communicate between my two ubuntu PCs, but my new internet connection is far too slow for this method. Is there someway I can directly communicate between my two PCs using the router. Samba? moreover, my ip seems to be dyanamic through my internet, how can i change it to static? or will it not matter for Local area connections?
View 5 Replies View Relatedventuring into unfamiliar territory so I'm hoping someone can help me and make things a little more understandable for me. I have setup Postfix on a standalone server connected directly to the internet. I have got inbound and outbound email working for the most part, but I am worried about security.My fear is that if I leave port 25 open to the outside world spammers will find this and start relaying mail through it and eventually blacklisting the IP attached to this box.
For now, I am hosting mail for a single domain and single user (me) with a few aliases. I plan on expanding to IMAP and SMTP access from the outside at some point, but for now I've been using Mutt in a shell and it's fine for my needs for now.
Here are my current Postfix settings:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[code]....
