Ubuntu Networking :: Difference Between An Adsl Router And An Ethernet Modem?
Dec 20, 2010not *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies
ADVERTISEMENT
Fedora Networking :: Configure ADSL Using Use Fc10 - Ethernet Cable <Asus Am608 ADSL Modem>
Aug 6, 2009I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View RelatedUbuntu Networking :: Connect Only One PC At A Time To Adsl Router/modem For Internet Access?
Apr 1, 2011I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
Networking :: Which Current Model ADSL Modem Router For DD-WRT - OpenWRT Or Tomato?
Mar 25, 2010What are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?
View 4 Replies View RelatedCentOS 5 Networking :: Connect Centos 5.5 Using Ethernet Port To ADSL Broadband Modem Which Is Configured In PPPoe Mode?
Feb 10, 2011Pl can anyone guide me to connect centos 5.5 using ethernet port to ADSL Broadband modem which is configured in PPPoe mode?
View 19 Replies View RelatedOpenSUSE Hardware :: Connected To A Fast Ethernet Switch Or Directly Into The ADSL Router?
Jan 5, 2010Using SuSE 11.2 can anybody suggest a decent compatible Ethernet / Network Colour Printer. Just a printer not a multifunction device. The printer will be connected to a Fast Ethernet Switch or directly into the ADSL Router.
View 4 Replies View RelatedOpenSUSE Network :: Router/adsl Modem Is Not Connected To A Power Supply - How To Connect It
Feb 5, 2011My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View RelatedOpenSUSE Network :: Adsl Modem Acting As A Bridge To My Router Setup - Connection - Internet Went Slow ?
Jun 19, 2011I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedUbuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?
Apr 13, 2010Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedNetworking :: Set Up A Laptop As A Router To Connect Wirelessly To ADSL Router?
Nov 6, 2009I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
Networking :: How To Connect Adsl Modem
Jul 25, 2010I have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies View RelatedNetworking :: SSH Through ADSL Router?
Nov 1, 20101) I have an ADSL router for internet and RHL box sitting on the southside of the southside of the router with local IP configured.
I have to access the Linux box through the internet.
I have tried to port forward the SSH port on the ADSL router, that is not working.
Ubuntu Networking :: Netcomm NB100 Adsl Pci Modem Driver?
Oct 10, 2010I want to get an adsl 1 internal pci modem card for my home server. Netcomm's NB100 seems to be the most readily available. Does anyone know if there are ubuntu drivers for it? If not can you suggest a card that does and is easy to get a hold of?
View 2 Replies View RelatedUbuntu Networking :: Connect To Internet Using ADSL Router?
May 23, 2010I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
CentOS 5 Networking :: Configure Modem ADSL For Cpanel?
May 26, 2009While communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies View RelatedUbuntu Networking :: Increase Capacity / Bandwidth With More ADSL Line And Modem Combination
May 14, 2010I am currently running a network with a file server that runs Ubuntu 10.04 Desktop at the moment. DHCP and samba are setup on it for now. Has multiple network cards but we only use the gigabit interface. Here's what I want to do in the near future. I want to provide internet access to the network via ADSL (no better option currently) So what i'll have is one or more ADSL lines and their corresponding modems (most likely D-link ones as they are cheap). As i understand it the server will be doing the job of a router. anyway, point wise here's what i want to be able to do:
1. Have ability to increase capacity/bandwidth with more ADSL line & modem combinations
2. Have user accounts (probably web based setup or any other option) for internet access so that they can be billed per GB.
3. Still be able to share files that are on the local network using local DHCP if possible.
So to an existing network that has files i want to add internet access capability. but users will have to log on so that their usage can be monitored. I have been searching around but maybe the search terms are wrong for what i need accomplished. i don't mind upgrading the ubuntu version to the server edition so long as i can use X11 forwarding atleast so that i can do remote monitoring. VNC is too slow, and using nautilus forwarded via X11 to my desktop sorts out most of my needs. The network provide has suggested maybe using pppoe but i am thinking if there was a welcome page based authentication system then it'd be more easy to monitor?
Ubuntu Networking :: Belkin F5Z0142uk Enhanced Wireless ADSL Router Kit
May 13, 2010Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies View RelatedNetworking :: Debian Router, 2 NIC, Traverse Viking ADSL+ Card?
Jan 6, 2010Since this is my first post, before i describe my problem, i'd like to say regrats to all of you for maintaining here such a good support community.
So, here we go: I have a headless Debian box and i want to set it up as a small office router/gateway. On the box i installed a regular NIC and a Viking Traverse ADSL+ Card which gets recognised by the OS as an 8139 ethernet card and has an embedded ADSL+ modem. The modem is accesible through the PHY interface once it gets assigned an IP. Having said that here is the actual setup:
eth0 : Viking Card
eth1 : NIC (this NIC is connected to a switch)
eth0 : 192.168.1.2 (internal modem is on 192.168.1.1)
eth1 : 192.168.1.3
/etc/network/interfaces
[Code]...
Ubuntu Networking :: D Link ADSL Router - Ping: Sendmsg: Operation Not Permitted
Jan 13, 2010I use a wired Dlink Adsl Router GLB502T with its inbuilt dialer configured. Problem is it will not connect while computer is running.When I try to ping the local ip of the modem this is what I get "ping: sendmsg: Operation not permitted" and "/etc/init.d/networking restart" has no effect either.I need to restart my computer every time i want to connect to the Internet.I switch on the modem when the grub bootloader appears and the modem connects without any problem.This problem appeared when i installed Ubuntu 9.04.There was no problem with Ubuntu 8.04.
OS:Ubuntu 9.04
Motherboard: Asus M2N68-AM
NVIDIA Geforce 7025/nForce 630a
RTL8211CL Phy Gigabit LAN
[code]....
Networking :: Connect Nokia Seimens C2110 ADSL Modem Through USB Cable In Fedora 11
Sep 19, 2009My broadband internet connection came with a Nokia-Seimens C2110 Adsl modem. Please help me connect the modem through USB cable as the ethernet card is used to connect my computer(Asus- P5RD2 VM motherboard) to a different computer on LAN. I am in a fix and have no clue how to proceed.
View 1 Replies View RelatedUbuntu Networking :: Connect Adsl Modem / Cannot Create Dial-up Option Where Can Give Username And Password?
Apr 9, 2010I use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
Ubuntu Networking :: Use 3G USB Modem Dongle And Ethernet Network At Same Time
Feb 24, 2010I currently have a computer sitting underneath a router/switch on a Local Area Network that I want to connect to the Internet using a 3G USB dongle modem. If I am connected to the ethernet and then enable the modem connection, only the ethernet LAN side works. If I enable the modem and then enable a (disabled) ethernet connection, only the ethernet LAN side works. If I keep the ethernet disabled and connect using the modem, I can get out onto the Internet, but obviously not the LAN. I need to be able to do both.
View 2 Replies View RelatedUbuntu Networking :: Ethernet Cable Modem Can't Connect To Internet
May 4, 2011I am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
Ubuntu Networking :: PC Router Between Wireless And Ethernet Interface
Sep 2, 2010I tried to setup a connection as below but face some problem (probably route table setting incorrect). Hope if anyone could shed the light.Basically, I have a PC1 (.1) and PC2 (.130) connected via a PC router. PC router has 2 interfaces: wireless (.2) and ethernet (.129). PC1 connects to PC router via LAN cable/wireless interface, while PC2 connects to PC router via cable. This settings try to simulate 1 wireless connection along the path (and because PC2 is too old to support wireless interface, we need a PC router). These interfaces are all under same 172.16.130.x subnet.
View 3 Replies View RelatedUbuntu Networking :: Cannot Get Internal Ethernet To Pick Up Router
Oct 8, 2010My old G USB network stick died and I also cannot get my internal ethernet to pick up my router. I've tried installing ndiswrapper, but I keep getting prompted to insert the installation cd for ubuntu's Jaunt Jackalope, which is what I am currently operating. I don't have an installation disk. I installed this version a while ago via usb stick (which I no longer have). Is there any way I can install ndiswrapper without having to use a ubuntu installation disk? I'm hoping installing ndiswrapper will solve my inability to connect wirelessly to the net via either my ethernet card of the new NetGear N100 usb network stick I just purchased.
View 1 Replies View RelatedUbuntu Networking :: 10.04 64bit - Cannot Find My Router Even Via Ethernet
Jan 16, 2011I recently installed Ubuntu via "wubi", and tried to set up the Wireless. After looking at a few threads, they suggested using an Ethernet cable to troubleshoot the problem. However, my laptop does not detect the router even via an Ethernet cable. I am running 64 bit(It auto-downloaded with wubi) on an Acer Aspire 5553G, and my router is a Netgear DG834G. I have an Atheros AR8151 PCI-E Gigabit controller, a Broadcom 802.11n Network adapter and TAP Win32 Adapter V9.
View 1 Replies View RelatedUbuntu Networking :: Wireless Internet Modem (USB) And A LAN Ethernet - Connect To Both At The Same Time?
Jul 22, 2010I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
View 6 Replies View RelatedUbuntu Networking :: 3G USB Modem, In And Using Wireless Router Out To Lappy, Wii Ect?
Feb 7, 20103G USB modem, in and using wireless router out (via ethernet) to lappy, Wii ect.We don't have a phone line just mobile phone and mobile internet because it is mobile.I have a wireless router only but need wireless to improve my standing within the house because I am seen as a net hog!
I did come across a Virgin wireless modem but it is soooo painfully slow (tested it against the USB dongle modem 3-4kb same test 1 min later 280-300kb's USB.) The wife could make herself a cuppa just waiting for the facebook login page to load!Would it need to pass on the connection bcause the USB is fully setup? then wireless is setup or would it be required to have a 3rd security setting ect in between?It would be good to use a low spec computer because I have a few. Headless too, maybe?
Ubuntu Networking :: Remote SSH With Both DSL Modem And Wireless Router
Jul 28, 2011I have an Ubuntu server that I need to access remotely while I am at school. The server's internet connection comes first through a DI-604 broadband router and then through a Netgear Wireless router:
ethernet wall jack --> Broadband Router --> Wireless Router --> Server's ethernet port
I can manage to get the SSH to work with the current IP address (dynamic) by connecting the server directly to the broadband router, but I cannot set up DNS (ddclient on the server, Namecheap for domain registrar and nameserver) with it. I can set up DNS on the router with no issue, as it has the DNS client built in, but I cannot get the SHH to connect through both the modem and the router as mentioned above. Best case scenario, this can be fixed without having to get anything new, but if that is the case, recommendations of a new setup
Other reference info - ISP at server is Verizon Fios, broadband router set to PPPoE.
Ubuntu Networking :: Can't Access Internet On 4 Port Ethernet Router
Mar 1, 2010I changed to a 4 port ethernet router (D-Link DSL-2542B Adsl2+)with intention to share Internet access with my brother (he's on Vista).Initially it all went well,but 3 days ago there were connection problems occured on the part of the ISP. Without realized the problem,I had reset the router.This morning I've been informed by the ISP that the connection has been re-established.So,I accessed the Internet via the 4 port router but failed to do so (server not found).Suspecting that the problem was from the 4 port router,I reverted to my old Adsl router (DSL-520B single port) and without any problem I managed to access the Internet back.I really need help to configure back the 4 port ethernet router to its initial state.
View 9 Replies View Related