After reinstall Ubuntu 10.04 LTS didn't recognize my ADSL router Billion 400 G.The Ethernet 1 led is off after booting.Search on web for help on this but no good results.You good people now are my last resort.I tried boot in live CD and result is the some.Check with sudo lshw.
View 9 RepliesI have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
i need to connect to the internet with my huawei smartax mt880 adsl router from a linux redhat 9 box ,
- I can get into the router as user admin / admin at address 192.168.1.1
- I get missed in between pppd setup & my kernel modules insertion . . .
- can I find a clear step by step guide to get me connected to the internet ?
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View RelatedBecause of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedI've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following:
Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise
Changing the SSID, broadcasting to ON, changing the SSID name
I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says
Problems occurred during the network connectivity test
This can be caused by invalid network config or problems w/ your momde / router
Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!
1) I have an ADSL router for internet and RHL box sitting on the southside of the southside of the router with local IP configured.
I have to access the Linux box through the internet.
I have tried to port forward the SSH port on the ADSL router, that is not working.
not *buntu related but what is the difference between an adsl router and an ethernet modem?
View 5 Replies View RelatedI'm going to set up a new linux router for a company, and have to set up bandwidth throttling. They have an unlimited ADSL internet connection which will be shared between 2 businesses, one being them. I will need to set it up so their connection will never be slowed down by the other business. They will both be connected to the same NIC, but will be on different subnets. How would I go about doing this?
View 2 Replies View RelatedDoes anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies View RelatedThe router should handle everything automatically and transparently. All you need to do is make sure that the wireless Ethernet adapters in the laptops can "talk" to the wireless router.
View 4 Replies View RelatedSince this is my first post, before i describe my problem, i'd like to say regrats to all of you for maintaining here such a good support community.
So, here we go: I have a headless Debian box and i want to set it up as a small office router/gateway. On the box i installed a regular NIC and a Viking Traverse ADSL+ Card which gets recognised by the OS as an 8139 ethernet card and has an embedded ADSL+ modem. The modem is accesible through the PHY interface once it gets assigned an IP. Having said that here is the actual setup:
eth0 : Viking Card
eth1 : NIC (this NIC is connected to a switch)
eth0 : 192.168.1.2 (internal modem is on 192.168.1.1)
eth1 : 192.168.1.3
/etc/network/interfaces
[Code]...
I use a wired Dlink Adsl Router GLB502T with its inbuilt dialer configured. Problem is it will not connect while computer is running.When I try to ping the local ip of the modem this is what I get "ping: sendmsg: Operation not permitted" and "/etc/init.d/networking restart" has no effect either.I need to restart my computer every time i want to connect to the Internet.I switch on the modem when the grub bootloader appears and the modem connects without any problem.This problem appeared when i installed Ubuntu 9.04.There was no problem with Ubuntu 8.04.
OS:Ubuntu 9.04
Motherboard: Asus M2N68-AM
NVIDIA Geforce 7025/nForce 630a
RTL8211CL Phy Gigabit LAN
[code]....
What are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?
View 4 Replies View RelatedUsing SuSE 11.2 can anybody suggest a decent compatible Ethernet / Network Colour Printer. Just a printer not a multifunction device. The printer will be connected to a Fast Ethernet Switch or directly into the ADSL Router.
View 4 Replies View Relatedrecently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedI have an ADSL Internet connection with static IP.I connected through PPPOE from my modem to my ISP.I need to ssh from outside of my home to my home, But i don't know to use which connection between my computer and my modem.(dhcp ,static , bridge or ....)
View 1 Replies View Relatedi've installed debian lenny 5.0.4 in my hp laptop,using an officiel cd , i've installed ppp, pppoe, pppoeconf to configure an adsl connection (the dhcp is automatically configured on eth0)the trouble is : that ifconfig works fine, but when i want to connect it is impossible , this is my interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
I have an ADSL line that allows me for maximum of 4 concurrent users with external IP addreses. The IP addresses are not static (they change every 3-4days).
My current setup is as follows:
* A-link Roudrunner 44B Modem connected to the main line
* D-Link DI524 Router (port 1) connected to the modem
* This leaves me with 3 ports and Wireless for my other machines
What I wish to do is:
* Have all my machines with static IP addresses for LAN
* still have internet connection
I've tried enabling DHCP on the D-Dlink Router with LAN IP 192.168.0.1 and IP range from 192.168.0.100 - 192.168.0.199. Then gave my machine static IP 192.168.0.101, subnet 255.255.255.0 and gateway 192.168.0.1....obviously it didn't work. I've tried the above with both the modem being connected to the router via port1 and WAN port... but I have the same results. I also tried to do the same without the router (direct connection between the PC and modem) still got the same results. Could it be that what I am trying to do is not technically not possible due to my ISP setup to ensure no more than4 concurrent users limit is in place.
I'm using ubuntu 8.04 . Each time I return form suspend mode, the network icon in the right upper conner show a sign "!", which maybe mean there's limited network connection as in windwos. How can I solve this problem?
View 1 Replies View Relatedi cant connect to adsl with pon dsl-provider or any command line. just network manager applet GUI works for me. i follow this guide [URL] and try about 3 hours but without success. i edit /etc/network/interfaces following this thread: [URL] but after any alteration in /etc/network/interfaces and restart network my adsl connections are not work at all and also i lost my GUI applet connections too. then i have to back /etc/network/interfaces to its original content and restart my computer to restore my connections
pon dsl-provider error is:
Quote:
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View Relatedhow to connect to internet via ADSL,and wireless. i am writing all these frome windows
View 2 Replies View RelatedMy Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?
View 6 Replies View Relatedi've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect
View 1 Replies View RelatedDue to PCI limitations on our server, we are trying to connect a Trandnet TDM=C400 ADSL modem via USB but are not having any luck, as the modem appears not to be recognised.
View 8 Replies View RelatedI use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.