OpenSUSE Network :: Adsl Modem Acting As A Bridge To My Router Setup - Connection - Internet Went Slow ?

Jun 19, 2011

I have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !

View 2 Replies


ADVERTISEMENT

OpenSUSE Network :: Router/adsl Modem Is Not Connected To A Power Supply - How To Connect It

Feb 5, 2011

My router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?

View 5 Replies View Related

OpenSUSE Network :: Unable To Connect To The Internet Through Adsl Modem?

Jun 11, 2010

i've just installed opensuse 11.2 everything is working fine but i'm unable to connect to the internet through my adsl modem the network is shown to be active but after i configure the dsl connection i can't see any option from where to connect

View 1 Replies View Related

Ubuntu Networking :: Connect Only One PC At A Time To Adsl Router/modem For Internet Access?

Apr 1, 2011

I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.

Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).

View 5 Replies View Related

OpenSUSE Network :: X64 Xen Bridge Configured But No Br0 And No Internet Connection?

Mar 12, 2011

I have installed opensuse 11.4 xen on a HP ML115 G5 AMD Opteron server, which previously hosted a fully working opensuse 11.3 xen. The problem seems to be that br0 is not showing as a bridge device in network settings. When I first installed opensuse 11.4 networking was available via dhcp, I then installed the xen tools and answered the prompt to create a bridge, it was only when I re-booted the system that I lost my network connection.

Going back into network settings I compared the settings to an existing working opensuse 11.3 xen install that I have and noticed that br0 is not showing as a bridge device in network settings so cannot be selected, in fact no bridged devices are shown.

View 5 Replies View Related

OpenSUSE Network :: 11.2 Acting As Router Firewall

Mar 29, 2010

switched recently to 11.2 and it works fine for me as workstation I want to set up a router separating a part of the network and also acting as a firewall/proxy... Configured 2 Ethernet Interfaces, checked Ip forwarding in Yast but it does not forward the packets from the "internal" to the "external" network. Hovewer after I set up my router as default for machines on internal network I can ping the external interface but no adress on external network (particularly the one of the default router) !!! From the router I can reach both networks and the net via default gateway on external. Tried to:

a) switch firewall completely off
b) iptables -P FORWARD ACCEPT
c) masquarading internal adresses to the external network

my interfaces configuration looks like:
eth0 Link encap:Ethernet HWaddr 00:13:D4:E3:A2:7B
inet addr:192.168.1.34 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d4ff:fee3:a27b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

[Code].....

View 4 Replies View Related

OpenSUSE Network :: Cannot Install USB Modem Device For Internet Connection / Way To Do

Feb 14, 2010

I recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?

View 1 Replies View Related

OpenSUSE Network :: Nokia E65 Internet Connection - Modem Is Not Configured ?

Jun 12, 2010

Trying to move from Windows to OpenSUSE. I have installed OpenSUSE 11.2, and am having a hard time trying to connect to the internet using my nokia E65. I have tried to configure the modem thru YaST and it keeps showing that my nokia E65 modem is not configured, but adds another modem every time I configure using the edit button i.e. modem0, modem1 etc.

When i finish the configuration I get pop ups on the bottom right conner:
Notification from network management
WLAN interface attached
Network interface attached

But nothing happens afterwards. When I connect the phone it shows that it is recognized as a modem (probably). but when I click on the icon so it connects to my service provider "econet" it just says activating with a red x in the conner, and still nothing happens!

The following are the screenshots (still not sure how to attach files on this forum), may someone assist, with that too.

I really want to move from Windows but this is what's stopping me. the sooner I connect to the Internet through my phone, the sooner I leave Windows, since it's the only way I can connect to the internet.

I have tried wvdial, and I got the following:

View 9 Replies View Related

OpenSUSE Network :: Internet Connection Slow In Certain Applications?

May 17, 2011

I have recently moved countries and have finally got my internet connected today after a lengthy wait. I have a pretty fast connection - it's a fibre connection at approx 100Mbps Between my onu (modem) & computer (Lenovo SL510) I have a cisco wrt120N wireless router. I'm using Opensuse 11.3 (also dual boot with Win7)

My problem is . . . When I enter url in firefox (4) I get the message "looking up www. . ." for approx 5 to 15 seconds before anything starts to load. I also have the same behaviour in konqueror, firefox and yast software manager.

If I use Google Chrome the pages load instantly. Even never before visited pages.

A typical webpage such as Stuff.co.nz - Latest New Zealand News & World News, Sports News & NZ Weather Forecasts takes approx 20 to thirty secs to load in firefox and 3 seconds in Chrome. I can see the same behaviour always whether Chrome used first or firefox used first - so cache does not appear to be the issue.

If I boot into Win7 - websites load instantly there also.

I have updated to the latest wireless drivers for my system - but the behaviour is also evident if I attach a lan cable.

Here is a little info

Code:
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 60:EB:69:AE:C6:28
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0

[Code].....

View 7 Replies View Related

OpenSUSE Network :: Installing A Hardware Dial-up Modem And Configuring It To Get An Internet Connection?

Feb 28, 2010

Are there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?

View 2 Replies View Related

Fedora Networking :: Make ADSL Bridge Connection In 10?

Oct 2, 2009

"I am new to Linux. Could you please guide me how to make ADSL bridge connection. I have tried to make connection using Network manager. But, it some times works and some times doesn't works."

View 1 Replies View Related

OpenSUSE Network :: Setup An Internet Connection With 11.2?

Jun 23, 2010

I recently took a WIRED internet connection (from the people who provide cable TV) and switched from ubuntu to openSUSE11.2. . I am not able to set up an internet connection in openSUSE 11.2. I have been given a static IP, and the following info

subnet mask
gateway
dns server
alternate dns server

how do i setup an internet connection with these in openSUSE 11.2.

View 6 Replies View Related

Fedora Networking :: Connect To Internet (ADSL) By Laptop (Bridge)?

Nov 24, 2010

My Laptop can Connect to my wireless modem device, but I don't know How can I connect to internet (ADSL) by My laptop (Bridge)?

View 6 Replies View Related

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related

Ubuntu Networking :: Difference Between An Adsl Router And An Ethernet Modem?

Dec 20, 2010

not *buntu related but what is the difference between an adsl router and an ethernet modem?

View 5 Replies View Related

OpenSUSE Network :: Can't Setup Internet Connection Wired Or Wireless

Mar 11, 2011

I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.

View 9 Replies View Related

Networking :: Which Current Model ADSL Modem Router For DD-WRT - OpenWRT Or Tomato?

Mar 25, 2010

What are the pros and cons of various current model ADSL modem routers for use with DD-WRT, OpenWRT or Tomato? There are, of course, hardware compatibility lists (HCLs) for each of these (DD-WRT, OpenWRT and Tomato) but many of the models are no longer available and there are so many that researching them all would be onerous. Many pages on the Internet recommend the WRTG54L and that would be great but it is no longer an option except second user which is increasingly difficult. What are the pros and cons of the various chipsets: ADM5120, AR7, IXP4xx and BCM63xx?

View 4 Replies View Related

Networking :: Setup A Bridge Using Bridge-utils Within /etc/network/interfaces?

Dec 8, 2008

I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.

View 3 Replies View Related

OpenSUSE Network :: What Is The Command For Surfing Internet Via ADSL

Aug 31, 2010

what is the command for surfing Internet via ADSL?

View 9 Replies View Related

OpenSUSE Network :: Connect To Internet Via ADSL And Wireless?

Apr 27, 2011

how to connect to internet via ADSL,and wireless. i am writing all these frome windows

View 2 Replies View Related

OpenSUSE Network :: Make A Adsl Connection,but One Package Required?

Mar 25, 2011

I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?

Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?

View 2 Replies View Related

OpenSUSE Network :: Create Network Bridge / Device Hooked Up Via Ethernet Had No Internet Connectivity?

Feb 25, 2011

I'm on opensuse 11.4 (11.3 won't work with my monitor).

My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.

I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward

but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?

View 9 Replies View Related

Ubuntu Networking :: Connect To Internet Using ADSL Router?

May 23, 2010

I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.

My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.

View 1 Replies View Related

OpenSUSE Wireless :: Exchanged Modem/router For Same Model But Now Cannot Connect To Internet Using WEP

Dec 1, 2010

I had an ATT "2Wire" modem/router that was working but connection to the Internet was often poor. An ATT technician came to my home and swapped out the modem/router for the identical model. I changed the ESSID and WEP code to match the new unit and everything was fine with the following wireless units: a wireless desktop, two cellphones, three wireless Archos tablets, and a couple of e-reader tablets. So all seemed to be fine wirelessly. However...

My laptop (SuSE 11.0, KDE3) simply won't connect no matter what I do. I changed the ESSID and WEP info in the lappy exactly as was done with the other wireless devices named above. But no good. The lappy does see the modem/router (a good, strong signal appears in KNetworkManager). But it seems as if the modem/router is rejecting the lappy's attempted handshake using the new ESSID and/or WEP information.

I thought that perhaps there was something wrong with the lappy's wireless card, so I took it to a Starbucks to see if it would connect there on an open network, and it did without problem. So the lappy's wireless card appears to be working fine. It just won't talk to the encrypted modem/router at home. Here are the settings on the lappy. Hopefully something here is easily identified as the culprit. With all the clicking I've done it certainly is possible that I ticked something that should not have been ticked and just don't realize what I've done.

Network settings screen:
Global options tab:
Network setup method: user controlled with Network Manager
Change default route via DHCP (ticked)

[code]....

Why won't the new modem/router which is exactly the same as the old one except for the ESSID and WEP work with my lappy yet it does work with a bunch of other wireless devices?

View 9 Replies View Related

General :: Connect To The Internet With A Smartax Mt880 Adsl Router?

Feb 28, 2010

i need to connect to the internet with my huawei smartax mt880 adsl router from a linux redhat 9 box ,

- I can get into the router as user admin / admin at address 192.168.1.1

- I get missed in between pppd setup & my kernel modules insertion . . .

- can I find a clear step by step guide to get me connected to the internet ?

View 2 Replies View Related

Fedora Networking :: Configure ADSL Using Use Fc10 - Ethernet Cable <Asus Am608 ADSL Modem>

Aug 6, 2009

I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)

View 9 Replies View Related

OpenSUSE Network :: Network Connection Fails To Go Past Router

May 16, 2011

So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.

Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).

I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.

1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.

Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.

View 9 Replies View Related

Slackware :: Internet Connection (ADSL) As Common User?

May 12, 2011

how to make a user, not root, connect to internet? without having to type as root:Quote:# pppoe-startin an ADSLAlso ... to exit the Internet having to type, also as rootuote:# pppoe-stopBuilding on the topic: Is there a graphical interface for ADSL connection ?

View 1 Replies View Related

OpenSUSE :: Fix For Firefox Acting Slow On Page Look Ups?

Mar 25, 2011

On my system Firefox 4 seemed to be taking its sweet time "looking up" addresses, but when it found the page it blazed on the render. I poked around on the net and found a few suggestions to speed up the "look up". So I thought I would share... I aimed for the fewest changes, so not to break too many things or make a big mess. (Warning moving and changing things that you don't know about, in the about:config can goof up Firefox so double check your settings) place about:config in the address bar and hit enter

You should get a really long list of things

In the search bar put
network.dns.disableIPv6

My default value was set to false, go ahead and set it to true. Right click and Toggle. Clear out the search bar where network.dns.disableIPv6 was, and put in network.http.pipelining You should have three listings Right click on network.http.pipelining and Toggle so "true" shows for the value. Next, right click on network.http.pipelining.maxrequests and Modify, a box will pop up, replace the default 4 with 8. Close the about:config

Now test your Forefox performance. These three small changes, made a world of difference for me. Its now comparably fast as chromium. If you disagree with what I did, or want to let me know of any other "safe" speedups let me know. PS. If you don't see any improvements performance-wise or your from the future and do use IPv6, it would be best to go and take these settings back to the default Firefox settings.

View 2 Replies View Related

OpenSUSE Network :: Network / DNS - Can't Access Any Internet Resources Or Router

Jul 30, 2010

I'm having a strange problem with my network connection/DNS. I turn computer the on and it recognizes and connects to wireless or wired but I can't access any Internet resources or my router. If I ping the default gateway, I get no response and I get DNS errors from any network services that run at start up. If I stop and start the network daemon then it all works fine until the next time I turn on my laptop. It does this for both wireless and wired connection.

I've tried to edit the network interface information in YaST but it says that configuration is handled by knetworkmanager and I have no idea where that information is accessed. I should point out that it all worked fine until I tried to connect to open WAP at my school and couldn't so I connected to the wired network. Next morning I had this problem when connecting to my home network. My questions are 1. What could be the cause of this error and 2. where does one configure the network interfaces when using knetworkmanager

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved