OpenSUSE :: Lm_sensors Failed After Configuration By Sensors-detect?

Nov 12, 2009

lm_sensors failed after configuration by sensors-detect.

server3:~ # rclm_sensors start
Starting up sensors: failed
/etc/sysconfig/lm_sensors

[code]....

View 2 Replies


ADVERTISEMENT

CentOS 5 :: Error: Starting Lm_sensors: No Sensors Found

Aug 9, 2009

I recently built a cluster with Centos 5.3 and nodes that used different versions of the w83627ehf sensors chip. On some nodes sensors-detect detected the chip:

Found `Winbond W83627DHG Super IO Sensors' Success!(address 0x290, driver `w83627ehf')

But starting lm_sensors returned the error: Starting lm_sensors: No sensors found!

On other nodes sensors-detect did not detect the chip at all: Found unknown chip with ID 0xb073(logical device B has address 0x290, could be sensors)

[Code]....

View 4 Replies View Related

Ubuntu :: Lm-sensors Will Not Detect Any Sensors On HP Desktop

Mar 3, 2011

I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.

View 3 Replies View Related

Ubuntu :: Im-sensors Detect Only Coretemp?

Jan 14, 2010

i moved on ubuntu 9.10 Karmic, before on 9.04 All sensors work fine but now only "coretemp".so ran "sudo sensors-detect" and output result is:

Code:
#----cut here----
# Chip drivers

[code]....

View 2 Replies View Related

Ubuntu :: Can't Get Sensors Detect To Work With Conky

Jun 10, 2011

i downgraded from 11.04 to 10.10 but now i can't get sensors detect to work with conky.

misc info:

64 bit Ubuntu 10.10
acer aspire 5742, i5 processor
lm-sensors version: 1:3.1.2-6

[Code].....

View 1 Replies View Related

Hardware :: Sensors Only Detect One Phenom II Core?

Oct 17, 2010

I have k10temp driver built into the kernel and using lm_sensors 3.2.0.But, sensors can only detect 1 phenom core.Quote:

k10temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +40.2�C (high = +70.0�C, crit = +99.5�C)

View 5 Replies View Related

OpenSUSE :: New Motherboard - Command "sensors" Shows "no Sensors Detected"

Mar 17, 2010

I just recently changed my motherboard, and now the command "sensors" shows "no sensors detected" I ran sensors-detect but still i get no sensors detected.

View 9 Replies View Related

OpenSUSE :: Lm_sensors Do Not Show CPU Temperature (11.3 X86_64)

Aug 3, 2010

I have a problem with monitoring CPU temperature on x86_64 OpenSUSE 11.3. It returns the following:

it8720-isa-0290
Adapter: ISA adapter
in0: +1.18 V (min = +0.00 V, max = +4.08 V)
in1: +1.58 V (min = +0.00 V, max = +4.08 V)

[code].....

I use a Core i5 750 on a Gigabyte GA-P55A-UD3 motherboard. I could not find anything useful neither by googling, nor by using the forum search.

View 1 Replies View Related

OpenSUSE Hardware :: Lm_sensors Doesn't Start?

Mar 10, 2010

I am operating openSUSE 11.2 x86_64 KDE4.3 after installing sensors then adding

Code:
acpi_enforce_resources=no
to my optional kernel parameters and running

[code]....

View 2 Replies View Related

Debian Configuration :: Gnome Sensors-Applet - No Nvidia GPU Temperature

Jun 3, 2010

I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.

I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times

View 1 Replies View Related

Debian Configuration :: Backported Kernel Has Broken Hardware Sensors?

Aug 4, 2011

Having installed the 2.6.32 backport for Lenny, I have suddenly noticed that my Gkrellm doesn't display CPU and MB temperature anymore. Also, the smart sensors are inaccessible. Smartctl cannot access the readings even when run manually in a root terminal. I tried reinstalling lm-sensors and running sensor-detect again but it didn't help. What else needs to be updated to let the backported kernel see the hardware sensors?

View 4 Replies View Related

Software :: Lm-sensors Does Not Find All Sensors?

Jun 21, 2010

I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect

Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)

[code]...

View 3 Replies View Related

OpenSUSE :: GConf Error: Failed To Contact Configuration Server

Jul 26, 2011

I developed a java application to organize the articles and notes for what I need for my work reports. The path appear in a jlist component and by clicking on I'd like the file opened. The application works fine in /home side.

In /root side I get this message error:

"GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon." I work in KDE (OpenSuse 11.4). Why I need a configuration tipically of GNOME?

View 7 Replies View Related

OpenSUSE :: Temp Sensors Not Found?

Jan 22, 2010

just downloaded gkrellm and I go to set the temperature sensors and I get "No Sensors Detected" now I've never dealt with something of this nature before so can anyone tell me where I might begin with this one?

View 9 Replies View Related

OpenSUSE :: Getting Sensors To Work On Kernel 2.6.33 ?

Apr 6, 2010

Im having some trouble getting sensors to work on kernel 2.6.33.

This is what i have at sysconfig under lm_sensors:

Code:

When i do /etc/init.d/lm_sensors restart i get this:

Code:

I know k10temp driver is now included on kernel 2.6.33 so i dont know what to do.

View 1 Replies View Related

OpenSUSE Install :: Authentication Failed \ After Doing All The Configuration Rebooted And Tried To Login.Nothing Happened?

Jun 22, 2011

Now i will try to explain my problem.I just installed fresh 11.04 openSuSe 64bit.After doing all the configuration I rebooted and tried to login.Nothing happened.Googled some things, tried ctrl alt f1 and login as root, also tried to login as root, even changed my root password to be sure.Still, nothing happens, except for the thing that everytime I try to login as root it says authentication failed, but if i type my password bad it says bad password.

View 5 Replies View Related

OpenSUSE Hardware :: Sensors-AMD CPU Temperature Monitoring

Dec 4, 2010

I have just recently installed opensuse 11.3 on my computer. I have switched from Ubuntu and have been trying to get things configured similar to what it was. One problem I have encountered is with installing sensors and k10temp, the module needed to monitor my CPU temp. within Linux. I have an AMD sempron and a biostar mcp6p m2+ motherboard. I have installed package "sensors" and have run the sensors-detect and it went through and found k10temp that I would need to load within the kernel for this to work properly. I had this working in Ubuntu, but not sure how to do it in openSuse. I have tried compiling the k10temp source, running modprobe k10temp and received no output, and looked around the conf files, but not sure how to go about doing it?

View 2 Replies View Related

OpenSUSE :: Miro In 11.2 KDE - Bouncing Logo Then Nothing - GError: Failed To Contact Configuration Server

Feb 24, 2010

I have just recently switched from Gnome to KDE in 11.2 since there was some sort of major KDE update that fixed the issues I had been having with KDE. Ever since, I have not been able to get miro to load. I try to run it and all I get is the bouncing logo, then nothing. When I try to run Miro in terminal, I get this:

solomon@linux-yz7i:~> miro
ERROR:dbus.proxies:Introspect error on :1.150:/org/participatoryculture/dtv/OneTime: dbus.etop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote applicge bus security policy blocked the reply, the reply timeout expired, or the network connect
PyNotify support disabled on your platform.

And it will sit there for eternity or until I close the terminal window. When I run Miro as root, I get this:

linux-yz7i:/home/solomon # miro
Traceback (most recent call last):
File "/usr/bin/miro.real", line 48, in <module>
upgrade.upgrade()
File "/usr/lib/python2.6/site-packages/miro/plat/upgrade.py", line 77, in upgrade
if client.dir_exists("/apps/democracy/player") and not client.dir_exists("/apps/miro"):

glib.GError: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)

View 7 Replies View Related

OpenSUSE :: Errors Trying To Use Zypper (from Console) - GConf Error: Failed To Contact Configuration Server

Jun 30, 2011

i been getting errors when trying to use zypper from the console. This happens in 2 pcs, and errors seem to be the same,One has 11.4 + gnome 2, standar installation (with gnome) from 11.4 DVD. The error i get whenever i run something like zypper install xxxyyy.rpm or zypper update is:

GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)

the other one, 11.4 with gnome 3 (clean install from live dvd):

GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)

GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See GConf configuration system for information. (Details - 1: Failed to get connection to session: The connection is closed)

I dont know if its related, but the one with gnome 3 constantly gives me (what i think is) a kernel panic when i shut down the system, it happens fast and the text on the screen is not "linear" but spread all over the screen, so i cant read the whole message, but it does say something about glib and corruption.This is actually the first time(s) ibe seen a kernel panic ever since i used ubuntu.

View 9 Replies View Related

OpenSUSE Install :: 11.3 Running On Samsung Q1EX - Working Configuration - Failed To Get Textmode Console

Sep 4, 2010

I needed to load Linux on a Samsung Q1Ex for a project I'm contracting on, and could not for the life of me get anything to run. Turns out that the video card is a chrome relative, and for some reason, almost every distro out there (I usually use debian for this sort of project - ie, no money, but use SLES at my day job) failed to even get to textmode console. Trying several distros, I finally put it out there and used OpenSuse and voila!, vga was working. After that, I got X running, and many hours later had the mouse working. The key to this device is Windows. I ended up parsing through the registry looking for "touch" and found that the software in use on Windows is eGalaxTouch. A quick google brought up their site where I found several Linux drivers. I used the beta mode drivers to get the mouse working. Here is a more detailed breakdown.

Use OpenSuse 11.3 (I used the full blown disc - its is the only distro I could get to boot correctly as the others all used OpenChrome, while OpenSuse seems to use fbdev - note here that installing the unichrome drivers will actually break X and cause you to have to reboot to get away from the mess on the screen). Use eGalaxyTouch drivers. The pdf's included in the download have step-by-step instructions but the big pieces are the setup.sh script and the serio_raw steps (note if you perform a 'hwinfo --bios | more' you can figure out which /dev/input/event* you're using - for me it was event1 and serio4). Note also to choose PS/2 when executing the setup.sh script provided in their download. eGalax_eMPIA Technology Inc. TouchKit Linux Driver Here is my xorg.conf now:

Section "ServerLayout"
InputDevice "EETI" "SendCoreEvents"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....

On the video, just stay with the fbdev and you should be good. So far, I've had KDE, Gnome, TWM all running; and now have my EFL apps running! Woohoo! Next piece of the puzzle is to verify sound, but on the face of it, looks like the system recognized it off the bat. And of course one other note. 11.3 is going to make me a convert!

View 1 Replies View Related

Ubuntu Installation :: USB - Detect And Mount The CD-ROM Failed?

Aug 10, 2010

I'm trying to install ubuntu-10.04-server-amd64 from a 2gb usb stick. I used Universal-USB-Installer-v1.7.7 to put the contents of the iso onto the usb disc, the installer boots fine but it always fails at "Detect and mount CD-ROM". Any suggestions? I thought about trying to mount the usb stick (/dev/sdb) to the where the installer is looking for the CD-ROM but I don't really know where that is.

View 9 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory

[Code]..

View 14 Replies View Related

Fedora Installation :: Dual Boot Ubuntu - Failed To Detect ?

May 27, 2011

I had Ubuntu 10.10. Now in the free space remaining in my hard disk, I installed Fedora 15. But unfortunately, Fedora failed to detect ubuntu. Now when I start my computer, grub automatically loads fedora and also doesnt display the boot menu. How can I boot ubuntu and let the grub display a menu of operating system choices?

My /etc/grub.conf file in fedora is as follows:

Code:

View 2 Replies View Related

Ubuntu Networking :: Failed To Detect / Scan The Bandluxe Gsm Modem

Mar 12, 2010

I just bought 3G modem bandluxe c170. The modem come without driver. I tried to active ppp dialer by "sudo wvdialconf /etc/wvdial.conf" but it failed to detect/scan the modem. install this modem? I am installing on Acer Aspire 4520 (AMD) and ubuntu 9.10.

View 1 Replies View Related

Software :: One Of My HDD Got Failed To Detect - GRUB Hard Disk Error

Dec 9, 2010

I have RAID1.. throgh SATA cable..One of my HDD got failed to detect...hen i chkd other hdd is detecting in BIOS but i couldn't boot.. It says GRUB Hard Disk Error.

View 3 Replies View Related

Debian Configuration :: Grub Does Not Detect Vista?

Jul 10, 2010

I am trying to dual boot my system. MS Vista and Debian lenny 5.05. Installed Vista first, need vista for voice recognition software. Installed Lenny second but grub does not see Vista. Installed NTFS-g3 so I can read and write to /dev/sdc1 where my vista is. But grub still does not detect it. Installed grub2 and upgraded from legacy but still grub2 does not see the vista partition.

View 6 Replies View Related

General :: Lm_sensors Not Working?

Jan 1, 2010

I'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:Code: # uname -aLinux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux

# cat /etc/issue
CentOS release 5.4 (Final)
Kernel

[code]....

View 4 Replies View Related

CentOS 5 :: Lm_sensors - To Get CPU Temperature?

Oct 24, 2010

Trying to find the CPU temperature, I found this lm_sensors is what I need..I do this;

wget http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.2.0.tar.bz2
bzip2 -dv lm_sensors-3.2.0.tar.bz2
tar xvf lm_sensors-3.2.0.tar[code].....

View 9 Replies View Related

Debian Configuration :: Squeeze No Detect Ethernet Card

Aug 17, 2010

i install devian squeeze with the netinstall iso, all work fine except for the auto-detect of my ethernet card.i have a mother asrock p4i45gv with an onboard ethernet card realtek rtl8139/810x family fast ethernet NIC.i try everithing, the ifconfig shows only lo, but ifconfig -a shows a eth0 any ideas?

View 12 Replies View Related

Ubuntu :: Lm_sensors At Boot Time?

Jun 12, 2011

I managed to get lm-sensors working it has no initialization at bootime:Quote:Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): yCopy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.I've already copied 'prog/init/lm_sensors.init' to '/etc/init.d/lm_sensors' but it doesn't work. I still have i manutally have to load 'coretemp' to be able to have a temperature output from the command "sensors"

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved