I have a problem with monitoring CPU temperature on x86_64 OpenSUSE 11.3. It returns the following:
it8720-isa-0290
Adapter: ISA adapter
in0: +1.18 V (min = +0.00 V, max = +4.08 V)
in1: +1.58 V (min = +0.00 V, max = +4.08 V)
[code].....
I use a Core i5 750 on a Gigabyte GA-P55A-UD3 motherboard. I could not find anything useful neither by googling, nor by using the forum search.
Trying to find the CPU temperature, I found this lm_sensors is what I need..I do this;
wget http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.2.0.tar.bz2
bzip2 -dv lm_sensors-3.2.0.tar.bz2
tar xvf lm_sensors-3.2.0.tar[code].....
I'm using default KDE openSUSE 11.3 64 bit In windows I can see the temperature of my HP laptop (cpu I suppose). Is there a facility for viewing that in Linux / openSUSE. Maybe in KDE, maybe in Yast, wherever?
The reason is that my laptop's temperature and fan speed increases slowly when I convert large video files from one format to another and the computer eventually shuts down spontaneously when the temperature becomes critical. I'd like to watch this so I can prevent it. So I need the app.
I'm struggling to get my Conky feed to show the CPU temperature. I'm working with a fresh install of Ubuntu 10.10. Currently my Conky display shows a CPU temperature of 0 degrees Celsius, and I know this isn't true because I built the computer myself and I'm definitely not that good! Also, the GNOME hardware applet contradicts this and gives a more realistic CPU temperature of 33 degrees Celsius. What I can do to rectify this and get this displayed in my Conky?
The science bit:
I have done a sudo-sensors detect, and for CPU sensors it tells me:
Code:
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... Success!
(driver `k10temp')
AMD Family 11h thermal sensors... No
Intel Core family thermal sensor... No
Intel Atom thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
The end summary is as follows:
Code:
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)
and here is the relevant snippet of my conkymain file:
Code:
${color purple}CPU ${hr 4}$color
${freq}MHz Load: ${loadavg} Temp: ${acpitemp}
$cpubar
${cpugraph 000000 ffffff}
I am operating openSUSE 11.2 x86_64 KDE4.3 after installing sensors then adding
Code:
acpi_enforce_resources=no
to my optional kernel parameters and running
[code]....
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
lm_sensors failed after configuration by sensors-detect.
server3:~ # rclm_sensors start
Starting up sensors: failed
/etc/sysconfig/lm_sensors
[code]....
There is a question, i'd like to ask: is there any decent program to monitor HDD temperature for linux? WHy are they so few? Suse Install repositories do not show any that could be installed. I used to use hddtemp on my previous 11.2 gnome installation, but it seems now something gone wrong, and i cant get this program anymore through: "sudo apt-get install hddtemp" and receive "sudo: apt-get: command not found", so as i am a newbie i can barely guess what is wrong. maybe there are any other programs to get this thing running. Its really puzzling because every laptop user need such tool badly, and i do not understand why is there so many monitor tools for cpu temperature and not a single good for hard drive which is far more important than cpu temperature, that rises and drops constantly as soon as your fans are fine???
View 2 Replies View RelatedI installed opensuse 11.3 to my laptop.Toshiba L505-13w satellite. core i5 2.27 ghz , 4gb ram, 1gb ati display.I can't measure cpu temperature. I tried "acpi -t" and sensors but nothing happened.I also tried system information widgets from plasma menu.Still I can't see my cpu temperature. Can anyone help me about this problem? I want to see my cpu temp.
View 1 Replies View RelatedopenSUSE 11.4 64 bitsI have "sensors" package installed and configured with sensors-detect.The cpu temperature monitor plasmoid worked on kde 4.6.0 without problems but after installing 4.6.2 the monitor do not show any info.By running "sensor" from konsole I can see the temperature for both processors so it seems to be something related with the kde update
View 9 Replies View RelatedI have a dual boot with xp and opensuse 11.4. There has been an annoying 'system fan has failed' error message that was dealt with by replacing a fan and installing speedfan and hardware monitor on the windows partition, but my opensuse installation has no such programs running, and I want to keep things cool while I'm running opensuse. Speedfan is a program that tells the fans to turn on and off. Usually according to the temperature that the sensors are reading. The program shows temperatures and fan speeds and allows you to have control.Is there a fan speed/temperature monitoring program for opensuse?
View 7 Replies View Relatedcpu temp in Suse 11.2 is over than 55 C (sysem don not have any task) , but in windows 7 temp is 42 C
in fedora is 46 C I have new fresh install of suse 11.2 my cpu is : AMD Phenom(tm) II X2 550 Processor
what my system working warm ?
I have just recently installed opensuse 11.3 on my computer. I have switched from Ubuntu and have been trying to get things configured similar to what it was. One problem I have encountered is with installing sensors and k10temp, the module needed to monitor my CPU temp. within Linux. I have an AMD sempron and a biostar mcp6p m2+ motherboard. I have installed package "sensors" and have run the sensors-detect and it went through and found k10temp that I would need to load within the kernel for this to work properly. I had this working in Ubuntu, but not sure how to do it in openSuse. I have tried compiling the k10temp source, running modprobe k10temp and received no output, and looked around the conf files, but not sure how to go about doing it?
View 2 Replies View RelatedTemperature monitoring in 11.4 + GNOME 3?
View 7 Replies View RelatedI am looking for a daemon that will set the CPU to lower frequency if its temperature is going too high. I used an application like this in Windows.
View 3 Replies View RelatedI'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:Code: # uname -aLinux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
# cat /etc/issue
CentOS release 5.4 (Final)
Kernel
[code]....
I managed to get lm-sensors working it has no initialization at bootime:Quote:Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): yCopy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.I've already copied 'prog/init/lm_sensors.init' to '/etc/init.d/lm_sensors' but it doesn't work. I still have i manutally have to load 'coretemp' to be able to have a temperature output from the command "sensors"
View 5 Replies View Relatedhow should I read below output of lm_sensors ? Im interested ONLY with temp1 and temp2.I suspect that temp1 presents motherboard chipset temp and temp2 CPU temp. I hope this is like this... but I have no 100% assurance.
Code:
~# /usr/local/bin/sensors
w83697hf-isa-0290
[code]....
after random chashes of openSUSE 11.3 x86_64 on my Acer Aspire 5720z I found a lot of messsages on the log
Code:
mcelog: failed to prefill DIMM database from DMI data
dmidecode seem ok for me
Code:
sharwyn:/var/log # dmidecode
# dmidecode 2.10
SMBIOS 2.4 present.
[Code]...
With kernel 2.6.35 I get wrong readings on lm_sensors. They are about 20C off than the real values (e.g. if the CPU is at 50C, lm_sensors will show 70C). If I boot with any other kernel (like 2.6.32) I get the correct values. I'm using the 'coretemp' module on an Acer 7720 laptop. My distro is 64-bit Arch Linux.
View 2 Replies View RelatedI cannot install lm_sensors-2.5.5-3.i386.rpm nor lm_sensors-2.5.5-6.i386.rpm on RH 7.1.
The files complained by "failed dependencies" are present on my computer.
Why it fail to install?
Please help to fix the problem. code...
on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...
View 2 Replies View RelatedI recently built a cluster with Centos 5.3 and nodes that used different versions of the w83627ehf sensors chip. On some nodes sensors-detect detected the chip:
Found `Winbond W83627DHG Super IO Sensors' Success!(address 0x290, driver `w83627ehf')
But starting lm_sensors returned the error: Starting lm_sensors: No sensors found!
On other nodes sensors-detect did not detect the chip at all: Found unknown chip with ID 0xb073(logical device B has address 0x290, could be sensors)
[Code]....
I just tried to install mythvideo 0.22 from the packman repository and Yast tell me it requires python-imdb. Havent been able to track down an rpm for opensuse 11.2 x86_64. Is there any way to request that this rpm be built?
View 2 Replies View RelatedI'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:
Code:
# uname -a
Linux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
[code]....
I can't install gnome-mplayer on my openSUSE 11.2 I used the " 1-click insall" I also tried manully installation, got below errors # rpm -ivh gnome-mplayer-0.9.9.2-9.1.x86_64.rpm gnome-mplayer-lang-0.9.9.2-9.1.noarch.rpm error: Failed dependencies: MPlayer is needed by gnome-mplayer-0.9.9.2-9.1.x86_64 libmusicbrainz3.so.6()(64bit) is needed by gnome-mplayer-0.9.9.2-9.1.x86_64
View 4 Replies View RelatedI am using amarok-2.3.1-32.1.x86_64 kde45 repo 11.3 Tried OSS version too All other audio functions. Using Clementine ATM which is great.
View 4 Replies View RelatedI had a opensuse 11.1 X86_64 system with openoffice. This has been replaced by an opensuse 11.3 X86_64 system with openoffice 3.2.1.4. I have many pps files and these worked complete with sound on the 11.1 system but there is no sound on the 11.3 system. The 11.1 system has gone and was overwritten by Windows 7 so I can't verify the build. I know I made lots of changes to the 11.1 system in order to fix various problems and openoffice could well have come from a factory repo.
What I need to know is what is needed to make impress play pps presentations as it did on 11.1 and does on windows 7. I searched on the internet and it appears that the novell version of ooo may use gstreamer. I have loaded many gstreamer packages from packman including plugin-good but still get no sound. Starting impress from a command line does not produce any error messages.Does the novell openoffice use gstreamer or java multimedia? I have not yet tried the java option I could try downloading the novell openoffice source and try to work out what it is using. I am not sure that I have the time to go searching through the source and probably trying to compare it to the ooo source
Running 'zypper install lvm2-clvm' results in a message: Resolving package dependencies... Problem: nothing provides libcpg.so.2()(64bit) needed by lvm2-clvm-2.02.45-16.2.x86_64 Solution 1: do not install lvm2-clvm-2.02.45-16.2.x86_64 Solution 2: break lvm2-clvm by ignoring some of its dependencies So it cannot find the cpg library, which appears to be a part of openais (if I believe google). I have configured the following repositories:
[Code]....
What could be the problem here? Am I just missing a repository or is cluster LVM not supported on opensuse 11.3?
It looks like the ocfs2console is broken on openSuse 11.4 64bit. I tested on several servers and my laptop. It works under 11.3 x86_64 but that uses Python 2.6. OpenSuse 11.4 uses Python 2.7.
I tried to submit a bug but I can't seem to get my email address verified so I can use the bug tracker.
Server1:~/python-gtk/pygtk-2.12.1 # ocfs2console
ERROR: Unable to initialize the windowing
system: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Server1:~/python-gtk/pygtk-2.12.1 # uname -a
Linux Server1 2.6.37.1-1.2-xen #1 SMP 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
Server1:~/python-gtk/pygtk-2.12.1 # python
Python 2.7 (r27:82500, Aug 07 2010, 16:54:59) [GCC] on linux2