Debian Configuration :: Gnome Sensors-Applet - No Nvidia GPU Temperature
Jun 3, 2010
I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.
I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times
View 1 Replies
ADVERTISEMENT
Mar 28, 2011
I cant use the option "export" from the VPN settings in the Gnome Network Manager, when I tried to export a popup says "Unknown error"This happend also in 11.3 and now in 11.4, so it is a nm-applet problema I think... Is there any other way to export my VPN connections?
View 5 Replies
View Related
Dec 29, 2010
I have tried lm-sensors and a few others, firefox just crashed.
Phenom II X6 1090T
MSI-890FXA-GD70 motherboard
Ubuntu 10.10
Senors:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0C (high = +70.0C)
sensors-detect
Now follows a summary of the probes I have just done. Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)
No modules to load, skipping modules configuration.
Unloading i2c-dev... OK
There is a debugging panel on my motherboard, and I think that that displays the CPU temperature, although I am not sure.
View 6 Replies
View Related
Dec 4, 2010
I have just recently installed opensuse 11.3 on my computer. I have switched from Ubuntu and have been trying to get things configured similar to what it was. One problem I have encountered is with installing sensors and k10temp, the module needed to monitor my CPU temp. within Linux. I have an AMD sempron and a biostar mcp6p m2+ motherboard. I have installed package "sensors" and have run the sensors-detect and it went through and found k10temp that I would need to load within the kernel for this to work properly. I had this working in Ubuntu, but not sure how to do it in openSuse. I have tried compiling the k10temp source, running modprobe k10temp and received no output, and looked around the conf files, but not sure how to go about doing it?
View 2 Replies
View Related
Jun 27, 2010
I have a Dell Precision M4500, Intel Core i5 CPU, running Linux (Ubuntu Lucid), and would like to keep an eye on CPU temperature. I've tried lm-sensors: sensors-detect didn't find any sensors; following its hint ("This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.") I tried acpi -V but got nothing thermal. The Gnome panel applet "Hardware Sensors Monitor" reports on GPU temperature but nothing else.
View 3 Replies
View Related
Aug 4, 2011
Having installed the 2.6.32 backport for Lenny, I have suddenly noticed that my Gkrellm doesn't display CPU and MB temperature anymore. Also, the smart sensors are inaccessible. Smartctl cannot access the readings even when run manually in a root terminal. I tried reinstalling lm-sensors and running sensor-detect again but it didn't help. What else needs to be updated to let the backported kernel see the hardware sensors?
View 4 Replies
View Related
Mar 31, 2016
Quick background: the office in my shop is just a partitioned area so is subject to temperature and dust, just as the workshop area is. I've upgraded my desktop from an AMD Phenom II X4 955 which used to suffer overheating problems (despite regular cleaning) to an AMD FX-6300 on a Gigabyte 970A-D3P motherboard. For cooling I've fitted a Cooler Master Hyper TX3, plus various fans. Fresh install of Debian 8.3.
The cooler has certainly solved the overheating issues and the machine runs very quietly, rather than sounding like a 747 at take-off. But I'm now having some problems getting consistent reporting on temperatures.
The BIOS reports temperatures from the CPU which seem to be fairly consistently in the mid to high 30s (C).
lm-sensors and hddtemp have been installed.
sensors-detect reports (just the last section)
Code: Select allNow follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
[Code].....
psensor identifies AMD CPU and the NVidia GPU, apparently correctly, as it does the HDDs.
So, my problem is that the CPU temps reported by psensor and the panel app vary quite significantly with those that are reported in the BIOS. My thinking is that the BIOS is correct and that the software is either misreporting the temperatures or using the wrong sensors.
On the old machine I used to get a temperature from each core, just like in the BIOS, but now I'm only getting a single CPU reading.
View 14 Replies
View Related
May 6, 2010
I had previously installed lm-sensors and the associated files on my Lattitude 2100 when I was running 8.10 and got a great little bargraph readout thing at the bottom of the screen that helped me monitor system temperatures. Now that I've upgraded to lucid lynx netbook, I can't seem to get the same thing going. I installed the lm-sensors etc. but the applet/readout/display whatever you want to call it, is nowhere to be found.
View 8 Replies
View Related
Apr 14, 2011
I installed lm_sensors via Synapt & the Sensors Applet on the panel, but that applet shows me an invariable 40�C for 2 temperatures - 'CPU' & 'temp1'.Now I know it can't read the CPU temperature (long story, the CPU fan is hard-wired to 6v & there is no temperature feedback...) but it should be able to find a couple of other useful temperatures.The same PC in XP uses Speedfan which indicates plausible temperatures for (I think) Case & Hard Drive. (Temp2 & HD0 in the attached)I wonder what I have failed to do & why I cannot see Case or HD temps in Ubuntu?In terminal, I ran sensors-detect which went OK until the last bit where it said:
"~$ /etc/init.d/module-init-tools start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools start...etc" I don't follow that, but I have checked that I have it87 in both /etc/modules & in lib/modules/.../hwmon
View 3 Replies
View Related
Jun 3, 2010
I installed Sensors Applet & hddtemp. Installation was smooth, all of my devices were automatically detected and all seemed good.Then I restart the computer, and when everything comes back up, the processor, MB, and GPU are all working (showing a temperature) but none of the (6) hard drives are showing a temperature. After fiddling around with it I found that removing the applet from the panel, and then adding it back again fixes the problem. But then the next time I restart the computer it breaks again.
View 1 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Jun 30, 2010
After Kernel upgrade, sensors-applet doesn't display the hd temp. To fix the problem I have to remove and after reinstall hddtemp package.
View 5 Replies
View Related
Dec 27, 2010
I have been trying to get current weather using the GNOME weather applet. The ones which are installed by default and you do right-click > Add to Panel kinda thing. Now the problem is I'm getting stale or fixed current weathers as well as forecast. I have been trying for several weeks but with no success.
View 1 Replies
View Related
Feb 22, 2016
After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.
The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.
I've also spotted this message in the logs:
Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2
Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?
View 4 Replies
View Related
Mar 25, 2011
I've got a minor problem with my GPU: I replaced the OEM GeForce 6200 with a 9600 GT, but I believe the shutdown temperature is still set to the 6200's; causing annoyance with graphically intensive programs/games. It was a fairly small card, and has a low shutdown temp. BIOS revealed no settings, is there a setting for this in slack?
View 3 Replies
View Related
Sep 8, 2011
I have a suspicion that this is easily fixed, however a good google (and this forum) hammering having turned up the fix. So I probably have the wrong search criteria, My Gnome Applet for switching CPU Frequency Scaling has 'disappeared' and is not listed in the the Add to Panel.. list of applets.
View 3 Replies
View Related
Jun 8, 2011
I have hddtemp installed and I get outputs of my HDD temperature in Terminal, but I can't see a the HDD temp sensor in the Preferences menu of my Sensors Applet.
P.S. I have my /etc/default/hddtemp edited to:
Code:
# [automatically edited by postinst, do not change line format or set it to
# anything but false or true ]
RUN_DAEMON="true"
# List of devices you want to use with hddtemp. If none specified,
# hddtemp will probe standard devices.
DISKS="/dev/sda"
My Drive is a 7200.11 Barracuda split in /dev/sda1 and /dev/sda5, I use LinuxMint 10 64-bit w/ Gnome.
EDIT: I just had to reboot after I changed to RUN_DAEMON="true",
View 1 Replies
View Related
Nov 12, 2009
lm_sensors failed after configuration by sensors-detect.
server3:~ # rclm_sensors start
Starting up sensors: failed
/etc/sysconfig/lm_sensors
[code]....
View 2 Replies
View Related
Mar 3, 2011
I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.
View 3 Replies
View Related
May 18, 2011
Temperature monitoring in 11.4 + GNOME 3?
View 7 Replies
View Related
Nov 12, 2010
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click.
Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
View 1 Replies
View Related
Jun 21, 2010
I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect
Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
[code]...
View 3 Replies
View Related
Sep 29, 2015
While trying to solve the problem indicated in another thread [URL] .... I realised that I do not have the file /etc/X11/xorg.conf.
Also, if I enter the command Code: Select allsudo kate I get
Code: Select allcannot connect to X server :0
I tried logging in to another terminal (tty3) and entered
Code: Select allstartx
Kate opened normally with root permissions.
Currently I have a Nvidia card but I am using nouveau drivers.
My question is: installing the Nvidia drivers (following the guide in [URL] .....) would fix these Xorg issues?
I had troubles with nvidia drivers in other distros....
View 2 Replies
View Related
Sep 4, 2015
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies
View Related
Jun 7, 2010
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
View 14 Replies
View Related
Jun 16, 2010
I am on squeeze with kernel 2.6.32-3-amd64 and I have installed nvidia driver :cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 GCC version: gcc version 4.3.4 (Debian 4.3.4-8)
View 1 Replies
View Related
Sep 29, 2015
After my last package upgrade (Under Testing/Sid), gdm refuse to starts and immediately gives the Gnome message :
Oh no! Something has gone wrong. GNOME-shell
This error appears before I can choose this account to login. GDM or Xorg doesn't give any useful log.
After uninstalling nvidia non-free drivers, I'm now able to boot with nouveau.
Any way for having non-free drivers working again?
View 9 Replies
View Related
Jan 28, 2016
I am trying to install OpenCL on Debian Jessie with a Nvidia chipset. I have installed: nvidia-libopencl1, nvidia-opencl-icd and opencl-headers based on a website instruction. When I run a test program it DOES FIND libOpenCL.so.1 ...... but does NOT FIND libOpenCL nor libOpenCL.so
View 2 Replies
View Related
Mar 14, 2010
Had ATI card on my old setup, so this is my first experience with nVidia and Linux. I follow [URL]... , but run into problem with module assistant.
[code]...
"Fel" at the end is Swedish for "Error". I can't understand what to do to correct the error. When i look in Synaptic, it seems i have both gcc 4.4 and gcc 4.3. The gcc 4.3 states latest 4.3.4-6.
View 6 Replies
View Related
Apr 2, 2010
I follow a french tutorial to install the nvidia pilots. So, i did :
$ su
# apt-get install module-assistant
# m-a prepare
# m-a clean nvidia-kernel
# m-a a-i -i nvidia-kernel-source
[Code]....
View 6 Replies
View Related
