I have k10temp driver built into the kernel and using lm_sensors 3.2.0.But, sensors can only detect 1 phenom core.Quote:
k10temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +40.2�C (high = +70.0�C, crit = +99.5�C)
I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.
View 3 Replies View RelatedI'm having an interesting problem. I have an AMD quad core and for some reason I can't install x86_64 packages only i686 it originally didn't bother me, but now that i've finally decided to install an ATI graphics card I bought off a friend before i was running fedora but i can't installthe driver for it.
View 2 Replies View RelatedI have installed OpenSuse 11.3 32 Bit in a virtual machine on an older computer on a Windows XP host and on a new computer with AMD Phenom II X4 965 processor.
With sysbench I tested the performance of mutex and on the new computer it is 3 - 4 times slower than on the virtual machine. Other performance tests with sysbench for CPU, memory and threads are faster on new computer like expected. I tested this, because I have a slower performance of table creation in MySql tested with sql-bench, where creation of 10000 tables lasts 45 seconds on the virtual machine but over 400 seconds on the new computer.
I have tested with kernel-desktop and kernel-default but there are not large differences. File creation was tested with bonnie++ and is on newer computer faster as expected.
My questions are:
- Why is the mutex handling on the multi core CPU slower than in the virtual machine and how to speed up this?
- Or is there another reason why table creation of MySql is so much slower on multi core CPU?
i moved on ubuntu 9.10 Karmic, before on 9.04 All sensors work fine but now only "coretemp".so ran "sudo sensors-detect" and output result is:
Code:
#----cut here----
# Chip drivers
[code]....
i downgraded from 11.04 to 10.10 but now i can't get sensors detect to work with conky.
misc info:
64 bit Ubuntu 10.10
acer aspire 5742, i5 processor
lm-sensors version: 1:3.1.2-6
[Code].....
lm_sensors failed after configuration by sensors-detect.
server3:~ # rclm_sensors start
Starting up sensors: failed
/etc/sysconfig/lm_sensors
[code]....
i using sonyvaio VGN-SZ440 core 2 due , installed FC13 x64,but when i check system monitor so i see one core runing i can't understand ,
View 7 Replies View RelatedI'm trying to install Ubuntu 9.10 64Bit on my Intel Core 2 Duo Laptop, but it says "This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropriate for your CPU." However, I'm able to use Win 7 64bit and Win Vista 64bit on the same machine.
View 1 Replies View RelatedI would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect
Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
[code]...
I just recently changed my motherboard, and now the command "sensors" shows "no sensors detected" I ran sensors-detect but still i get no sensors detected.
View 9 Replies View RelatedI'm getting close to ordering the components for a new machine based on the AMD Deneb quad core and had one last question.I'd like to try a little careful overclocking, not only for the performance increase but also to learn how. Nothing extreme, no gaming, just whatever I can get with good stability with the stock heatsink and fan.I was going to get 8GB on 2x4GB strips but they are all CAS latency 9. The MB has 4 slots for a total of 16GB capacity. Would I be better off going with 4x2GB strips and try to get a lower latency strip like maybe 7?
View 5 Replies View RelatedNot so long time ago I have installed Centos 5.3 on my AMD Phenom II X4 server (I am hosting game servers on it). Only today I noticed, that cpuinfo shows me only two CPUs. I watched for the info in the dmesg and found there that the system boots up only 2CPUs.
Here is some info from the dmesg:
Quote:
Linux version 2.6.18-164.11.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010
Command line: ro root=/dev/VolGroup00/LogVol00
ACPI: Local APIC address 0xfee00000
[Code]....
Am I correctly understand that something wrong in BIOS? Or it is something else?
i've downloaded and burn the live cd of690MB, ISO format, 1 CD-ROM disc image for Intel-compatible PCs (32-bit) I am trying to install on my desktop which runs on phenom,it just doesn't bootbut on the other hand on my thinkpad laptop it works...
View 3 Replies View RelatedNot so long time ago I have installed Centos 5.3 on my AMD Phenom II X4 server (I am hosting game servers on it). Only today I noticed, that cpuinfo shows me only two CPUs. I watched for the info in the dmesg and found there that the system boots up only 2CPUs.Here is some info from the dmesg:
Linux version 2.6.18-164.11.1.el5 (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 0:4 APIC version 16
[code].....
What is a good reasonable average temperature (range) for this processor? At what temp should I begin to worry?
View 14 Replies View Relatedi am running gigabyte GA-M68M-S2P and AMD sempron 2.7. the problem is when i try to run dual core. it will boot and run for 2mins then it crashes. single core runs perfect.
View 6 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
I have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
Just a quick question. Does Kubuntu Karmic support core 2 E8500 out of the box or do you need the SMP kernel?
View 3 Replies View RelatedIs there any Linux API that will let me control on what core will a thread run? If not, do I have to use assembly language?
View 2 Replies View RelatedI have now installed Wheezy on two different hard drives and in each case it seems only one CPU of my dual core CPU computer is recognized. System Monitor, Gkrellm and lscpu show just one when prior to the new install the old Wheezy showed both CPU's. I have put the hard drive into two other computers with dual core CPU's and all show just one CPU.
Interestingly System Profiler and Benchmark (hardinfo?) > Devices > Processors now show a large amount of processor infomation when with the old Wheezy I would only see both CPU's listed and nothing else.
I've a Compaq CQ61 laptop, and i noticed that one of the cores is always at 100%.
I didn't check the duration of the battery but surely it will "eat" my battery in a hurry
I recently read in a forum that by default the Linux kernel only activates one of two cores in a dual core processor. Searching online gave one option to find out and that was the mpstat command. I therefore ran the command and got the following output.As the result says, it shows only 1 cpu. I was wondering what I could do to activate both cores in my machine, and whether doing so was going to cause me any problems.
View 14 Replies View RelatedAssume someone bind a particular process to a particular CPU core(In multi core machine) by using sched_setaffinity() like functions. Then how we can get that process running core id and CPU core utilisation of that process on that running CPU core(Pragmatically or by a Linux command)?.
View 5 Replies View RelatedI am/was(?) running a dual boot Windows 7 Home Premium and Fedora 12 system on an AMD Phenom platform.
I thought that I would try the KDE desktop and installed it with the command
yum groupinstall "KDE (K Desktop Environment)"
After tasting KDE for a while I decided that I far prefer Gnome.
I removed the KDE with
yum groupremove "KDE (K Desktop Environment)"
This appeared to work but I then found that whilst I can boot into Windows 7, I can no longer boot into Fedora 12.
I have tried booting the F12 DVD and going into to the Rescue function. I re-installed grub but still cannot boot into F12.
I have looked at grub.conf but can see nothing wrong.
I have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
I've a program that launches new processes, and wait for them to die before it exits. So, for example, my program is a process, and it launches 3 more processes, and when the 3 child processes end, it will exit.
As you see, at end of the example, the program used a total number of 4 processes.
1 - Now, I'm running this program in a CPU with 4 cores. This means that the program used each core for each process?
2 - How can I know which core the program used?
I want to generate core dump files from my program when it crashes. Its a pretty big process and has about 10-11 threads in it.I have followed the documentation to enable core dump by setting ulimit to unlimited etc. I quickly tried "A demo program creating a core dump" from the following webpage, which succeeds in Segfault and dumping a core file in the directory that I configured.However, I tried running my original program and caused it to crash. I did this by making calls to kill(), raise() or the same null pointer access as shown in the webpage above. In each case, my program crashed but did not generate a core dump file. Am I missing something?My program is in C++ and my environment is Redhat 9.0 (kernel 2.4.20)
Going through the "Why do I NOT get a core dump?" section on the same webpage as above, I can see two potential problems. One - there are issues with the suid/sgid (bullet # 6). I am not able to change any settings with suid because my system does not contain either /proc/sys/fs/suid_dumpable or /proc/sys/kernel/suid_dumpableTwo, my program has threads in it and the bullet # 8 is the problem.
We have a small cluster of 20 HP systems, all running CentOS 5.3 in an NFS-root environment. Half are quad-socket, quad-core Xeon E7340 @ 2.40GHz (total 16 cores), the other half are 8-socket, quad-core Opteron 8354 (total 32 cores). All systems have a Mellanox Infiniband adapter ("Mellanox Technologies MT25418 [ConnectX VPI PCIe 2.0 2.5GT/s - IB DDR / 10GigE] (rev a0)")
With kernel 2.6.18-128.1.6.el5, infiniband works fine on all systems.
With the update to kernel 2.6.18-164.11.1.el5 (and both types of node running the same NFS-root image), the 16-core Xeons still work fine. Infiniband no longer works on the 32-core Opterons. Specifically, either the ib0 interface fails to appear, or it does appear but when configured with an IP address, doesn't actually work. In either case, loading the IB kernel modules takes a long time, but I haven't instrumented the load script yet to see which module, if any, is at fault. More errors listed below.
However, if I tweak the BIOS of the 32-core systems to reduce the per-socket core count to 2 (so effectively 8-socket, dual-core, down to a total of 16 available cores), Infiniband starts working again. Putting it back to 32-cores makes it fail. Booting the older kernel makes it work again. In summary: old kernel, IB works on all systems. Newer kernel, IB only works on 16-core systems.
Updating the IB firmware from 2.5.0 to 2.7.0 (latest available) doesn't help. I also did a full 'yum update' to make sure that libmlx4, openibd all other associated packages were up-to-date. Doesn't help either.
Some errors that appear on 32-core nodes:
ib_query_port failed (-16) for mlx4_0
ib_query_port failed (-16) for mlx4_0
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
mlx4_core 0000:04:00.0: SW2HW_MPT failed (-16)
[Code]....