I had Ubuntu 10.10. Now in the free space remaining in my hard disk, I installed Fedora 15. But unfortunately, Fedora failed to detect ubuntu. Now when I start my computer, grub automatically loads fedora and also doesnt display the boot menu. How can I boot ubuntu and let the grub display a menu of operating system choices?
My /etc/grub.conf file in fedora is as follows:
Code:
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
View 1 Replies View RelatedI have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.
I realize this is a common problem, but I have noticed people having success.
I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.
I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.
My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)
Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.
I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.
I wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
Hi,I had a Windows 7 installation and I decided to install ubuntu 11.04 I tried several times but every time soon or later something with grub goes wrong.Most times I get the error "no such partition",once it just halted after "verifying DMI ... " .I fixed windows mbr with "bootsect /nt60 C:" and then tried to reinstall grub with boot-repair .It showed no errors but after reboot I get "no such partition" again.
My scheme is something like :
/dev/sda1 -> the windows 7 system partition NTFS
/dev/sda2 -> partition for windows programs etc NTFS
/dev/sda3 -> partition for files(images/music/videos) NTFS
/dev/sda4 -> extended partition
[Code]...
Problem is to boot fedora. On my system I have 3 HDD
on 1st - 2 partition (1)XP (2) free space for data NTFS
on 2d - 1 partition (1) Win Serv 2003
on 3d - 3 partitions (1) free space for data NTFS (2) /boot (3) Fedora 12
After installation boot manager doesn't see fedora! Only give me option to run XP or 2003. Another problem Fedora 12 Live CD doesn't work for my graphic. I see some quick text after lanch and then black screen but still understand that there going some processes under that black screen, than it looks like stop and w8 for my decision which I cant make cause don't see what is there going on. So there no chance to get under linux after instalation and no chance using live CD to install GRUB and I need some how edit boot.ini in windows to make it appear fedora in boot menu.
My current boot.ini looks like that:
Code:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(1)partition(1)WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)WINDOWS="Windows Server 2003 Enterprise x64 Edition" /noexecute=optout /fastdetect
multi(0)disk(0)rdisk(0)partition(1)WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
how should looks 3d line?
Code:
multi(0)disk(0)rdisk(2)partition(3)Linux="Fedora 12" /noexecute=optin /fastdetect
like this?
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies View RelatedI'm trying to install ubuntu-10.04-server-amd64 from a 2gb usb stick. I used Universal-USB-Installer-v1.7.7 to put the contents of the iso onto the usb disc, the installer boots fine but it always fails at "Detect and mount CD-ROM". Any suggestions? I thought about trying to mount the usb stick (/dev/sdb) to the where the installer is looking for the CD-ROM but I don't really know where that is.
View 9 Replies View RelatedI am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.
I have a Dell PE 600 box with 2 Adaptec 2110s U160 Single Channel RAID controller supported 6 HDDs.I am trying to install Ubuntu from a mini ISO - tried server / desktop / alternate as well. And also different Ubuntu versions.The mini installer runs upto setting the time zone (after configuring for DHCP et.al.) and then on the screen 'Detecting Disks and Other Hardware' hangs up.Now I am assuming its because of the fact that I have 2 of the above controllers - as I have another similar box with only 1 of the controllers and it installs/boots fine with no problems.Look forward to you suggestions/help and if there is any other info I can provide. I plan to set up Ubuntu 10.10 server on it. Btw I don't think its a Linux problem as SUSE 11.3 installs fine on the box.
View 1 Replies View RelatedThe problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedI currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
View 2 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
That didn't work at all. So I reinstalled Win 7. After Win 7 back up, I again tried to fix grub by doing this:
find /boot/grub/menu.lst (this gives hd0,5)
root (hd0,5)
setup(hd0)
quit
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?
i do not get this i have a computer here that i installed ubuntu 10.04 on it side by side with windows using the ubuntu installer now windows will not boot at all it just restarts every time we try to boot into it now im not stupid i tryed reparing the os many times with the disk no luck when i was exploring in the windows cds command line it showed that his intire os was moved to the d:/
View 14 Replies View RelatedI install windows XP and then unix centos. But again when I reinstall Windows xp then my unix centos not shows in boot menu. It automatically goes in windows xp. Now how can I recover my Unix centos.
View 1 Replies View RelatedI have two hard drives in my PC, ubuntu 8.10 on the first. After reading good reviews about Fedora 10, i decided to give it a try. I installed Fedora 10 in my second hard drive and the distro is great. But my problem is that now I cannot get into the Ubuntu install. I changed the /boot/grub/menu.lst file as recommended by several posts, but no progress. my menu.lst file below. if I have got it wrong or if I need to add anything.
HTML Code:
I'm looking to dive right into this whole GNU/Linux thing, and am looking to try out as many distros as I can. I've already installed Ubuntu Jaunty Jackalope, and want to dual boot fedora 10 with it. How hard would this be for a total linux n00b like myself?
View 14 Replies View RelatedI would like to try out fedora 12 using dual boot method. i currently have ubuntu karmic installed with grub2 and ext4 partitions and would like to dual boot with fedora 12. if i just install fedora 12 will it automatically pick up ubuntu karmic as welland add it to grub. will there be any problems since fedora uses grub legacy and ubuntu uses grub2?
View 1 Replies View RelatedI want to setup a machine that can dual boot both Fedora and Ubuntu.
The machine already has F11 installed and the bootloader is in /dev/md0 partition.
There are mounts:
I added another drive pair because I want Ubuntu on its own LVM partition on separate drive array.
So how do I add Ubuntu to this now?
I'm using ubuntu 10.04 at the moment and I'm interested in fedora 13.
Here is my grub.cfg file
I'm going to delete my sda1 entry (mandriva) and put fedora there instead. Will Fedora automatically detect my other partitions? If not, will copying and pasting the other entries into fedora's grub.cfg ?
I installed Ubuntu, and then Fedora so I could choose between the two, but after installing Fedora I thought I would get a choice, but it just boots to Fedora. Here's a screenie of my gpart and a paste of my grub. Can you tell where I screwed up, and how to fix it?
[Code]...
I am having problems creating an diskless fedora 12 workstation. I have my boot server set-up, dhcp works, tftp works, pxelinux.0 gets sent. I have installed fedora12 locally [to hdd from dvd] on the affected workstation and then copied the whole / [root] to my boot server. Then I have installed the dracut-network package and a new kernel. I have copied the /boot/vmlinuz-xxxx and /boot/initramfs-xxxx.img to my bootserver's /var/lib/tftpboot/images/F12-x86_64/vmlinuz and ..../initramfs.img Boot options are listed below (the whole pxe config file):
DEFAULT menu
PROMPT 0
MENU TITLE KBS1 BOOT SERVER
TIMEOUT 200
[code]....
the "deskless" client's ip is set statically to 192.168.0.114. Is there anything I am missing?
Our A+ project was to set up a dual-boot using XP Pro & the Linux download of our choice. What we did:
1- We formatted a 38GB HD using the NTFS file system.
2- Two equal sized NTFS partitions were created.
- Partition 1 was a Primary.
- Partition 2 was an Extended.
3- Used Ubuntu CD.
4- Install Ubuntu choices were to format the HD, install side-by-side, use the the longest continuous space, etc. We chose side-by-side.
5- After the install there was no evidence of the 2d 18GB partition (which we planned to use for XP Pro).
When we booted to the XP install disc that program booted to another HD (C.
Dual boot PC, boot disk and WIN XP are on good disk, Ubuntu was installed on failed disk. (I prefer separate disks for each OS).
I know I will need to reinstall Ubuntu later, and of course, GRUB2 now crashes without the Ubuntu disk.
Confirm that the only thing I need to do when I get the new drive installed and partitioned is to boot my XP disk in Recovery Mode and type "fixmbr", (then reboot to confirm clean WIN operation on the existing disk) then install Ubuntu as normal on the new disk.
I've been wrestling with this for the last couple of days - I can't dual boot XP and F10.
[code]...
I did notice when installing F10 that it remapped my drives, making the WIndows and therefore boot drive /dev/sdb and the Linux Drive /dev/sda. I know this requires changing some of the drive designations (hd0,0 etc) but I've done it twice and ended up only being able to boot into Windows.