Ubuntu :: Lm_sensors At Boot Time?
Jun 12, 2011
I managed to get lm-sensors working it has no initialization at bootime:Quote:Do you want to generate /etc/sysconfig/lm_sensors? (yes/NO): yCopy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.You should now start the lm_sensors service to load the requiredkernel modules.I've already copied 'prog/init/lm_sensors.init' to '/etc/init.d/lm_sensors' but it doesn't work. I still have i manutally have to load 'coretemp' to be able to have a temperature output from the command "sensors"
View 5 Replies
ADVERTISEMENT
Jan 1, 2010
I'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:Code: # uname -aLinux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
# cat /etc/issue
CentOS release 5.4 (Final)
Kernel
[code]....
View 4 Replies
View Related
Oct 24, 2010
Trying to find the CPU temperature, I found this lm_sensors is what I need..I do this;
wget http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.2.0.tar.bz2
bzip2 -dv lm_sensors-3.2.0.tar.bz2
tar xvf lm_sensors-3.2.0.tar[code].....
View 9 Replies
View Related
Sep 25, 2009
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies
View Related
Mar 5, 2010
It looks,slackware is taking too much time to boot. It's starting daemons at boot time.
What are those daemons that i can stop at boot time to increase booting time?
What's the best way to stop starting daemons at boot time?
View 14 Replies
View Related
Jun 5, 2011
how should I read below output of lm_sensors ? Im interested ONLY with temp1 and temp2.I suspect that temp1 presents motherboard chipset temp and temp2 CPU temp. I hope this is like this... but I have no 100% assurance.
Code:
~# /usr/local/bin/sensors
w83697hf-isa-0290
[code]....
View 3 Replies
View Related
Aug 3, 2010
I have a problem with monitoring CPU temperature on x86_64 OpenSUSE 11.3. It returns the following:
it8720-isa-0290
Adapter: ISA adapter
in0: +1.18 V (min = +0.00 V, max = +4.08 V)
in1: +1.58 V (min = +0.00 V, max = +4.08 V)
[code].....
I use a Core i5 750 on a Gigabyte GA-P55A-UD3 motherboard. I could not find anything useful neither by googling, nor by using the forum search.
View 1 Replies
View Related
Mar 10, 2010
I am operating openSUSE 11.2 x86_64 KDE4.3 after installing sensors then adding
Code:
acpi_enforce_resources=no
to my optional kernel parameters and running
[code]....
View 2 Replies
View Related
Sep 16, 2010
With kernel 2.6.35 I get wrong readings on lm_sensors. They are about 20C off than the real values (e.g. if the CPU is at 50C, lm_sensors will show 70C). If I boot with any other kernel (like 2.6.32) I get the correct values. I'm using the 'coretemp' module on an Acer 7720 laptop. My distro is 64-bit Arch Linux.
View 2 Replies
View Related
Jan 21, 2009
I cannot install lm_sensors-2.5.5-3.i386.rpm nor lm_sensors-2.5.5-6.i386.rpm on RH 7.1.
The files complained by "failed dependencies" are present on my computer.
Why it fail to install?
Please help to fix the problem. code...
View 1 Replies
View Related
Nov 12, 2009
lm_sensors failed after configuration by sensors-detect.
server3:~ # rclm_sensors start
Starting up sensors: failed
/etc/sysconfig/lm_sensors
[code]....
View 2 Replies
View Related
Aug 9, 2009
I recently built a cluster with Centos 5.3 and nodes that used different versions of the w83627ehf sensors chip. On some nodes sensors-detect detected the chip:
Found `Winbond W83627DHG Super IO Sensors' Success!(address 0x290, driver `w83627ehf')
But starting lm_sensors returned the error: Starting lm_sensors: No sensors found!
On other nodes sensors-detect did not detect the chip at all: Found unknown chip with ID 0xb073(logical device B has address 0x290, could be sensors)
[Code]....
View 4 Replies
View Related
Jan 1, 2010
I'm running CentOS 5.4 on an Atom 230-based MSI MS-7418 motherboard. I'd like to monitor this host' CPU temperature as well as the HD's temperature, but can't get lm_sensors to work:
Code:
# uname -a
Linux msi.workgroup 2.6.18-164.9.1.el5 #1 SMP Tue Dec 15 21:04:57 EST 2009 i686 i686 i386 GNU/Linux
[code]....
View 6 Replies
View Related
Mar 21, 2011
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies
View Related
Mar 4, 2010
Splashtop caught my imagination of my own tv like computer-"1button and ready to go " have tried puppy xpudWebConverger still unhappy Now lucid aming for 10 sec boot-Keeping ma fingers crossed installed a minimal karmic and am getting a decent 27 sec I Jus Wanted to ask: Is there a way to remove the grub an directly boot into ubuntu -not just hiding it by editing grub.d files and any other ways to reduce boot time.......
View 9 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Jul 26, 2010
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
View 1 Replies
View Related
Jan 11, 2010
This on a Vostro 1220 Laptop w/ Intel 5300 wireless:
A.I have long boot up time.I think it's because of the eth0 network search which I don't use.I have an intel wireless 5300 card running.How can I speed up the boot time, i.e. disable or change the eth0 at boot, the searching?
B:When I restart or shutdown, the screen flashes repeatedly and gets some garbled colors along the top before finally rebooting looks like windows ME or something).This vostro has an intel x4500HD vid chipset in it.
C.How do I get into gnome configuration editor to turn on Metacity compositing? Alt-F2 and run gconf-editor doesn't do it. I don't do compiz, but need compositing.
D.I need to install Chromium Browser as it sync my bookmarks.I have RPMforge enabled btw also...how can I do that? I.e. rpm repo for chromium?
This will help me get off to a running start so I can get up to speed on CentOS..
View 3 Replies
View Related
Mar 4, 2010
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
View 3 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Jan 11, 2010
Despite the fact that Ubuntu 9.10 boots up faster than its predecessors (I didn't time the boot up myself, so I can't say for sure), my Ubuntu laptop still takes around 50 seconds to boot up fully. Now I'm not happy with that, and I want it to boot up even faster.
View 9 Replies
View Related
May 2, 2010
lucid takes much less time to boot, but my boot time is considerably higher( almost 50 sec) is there any settings that can be changed to improve that?
View 9 Replies
View Related
May 19, 2010
Why is my computer taking around a minute to boot? 10.04 for me is slower at booting than 8.04 is. 10.04 is taking about 10 seconds to get to the login screen, then almost a minute after that before it gets to a fully loaded desktop.
View 7 Replies
View Related
Aug 19, 2010
I installed bootchart and had my boot times analysed. Unfortunately, I can't make head or tail of the resulting PNG file. Could someone take a look at and tell me what I should do to decrease boot time?
View 2 Replies
View Related
Dec 18, 2010
I'm using Maverick, and I'd like to know some ways that I can make my laptop boot faster. I put the image for the bootchart on my website, just click on the picture and then zoom into it. [URL]
View 3 Replies
View Related
May 7, 2011
I upgraded to 11.04 on April 29, and since then my boot time has gone from about 30 seconds to 1'30''. I have tried to disable the splash screen to see what happens, but I just don't have so much background in booting processes.
Code:
The dmesg shows something "strange":
[ 2.489729] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[code]....
View 4 Replies
View Related
Apr 2, 2010
I am a novice to ubuntu. I installed it yesterday and booted it through usb(after following instructions from the forum itself).My problem is that OS is booting just fine (as I can hear those drums beating) but there is no display. I have read the forums for the same problem , it says to press Alt+Clt+F1 to get the terminal. O tried that too but there is no display whatsoever just the blank screen.
I am using Lenovo notebook and i have installed ubuntu 9.10 and i have a dual boot the other one being win vista.
View 9 Replies
View Related
Jul 1, 2010
I just upgraded to 10.04 through the Update Manager. During the updated however I got an error telling me that it was unable to install something. Sorry, I can't remember what it was; it didn't stop the updated so I assumed it wasn't that important. Anyways, I don't know if this is because of that error, but during the boot process and when shutting the computer I get console messages. When I boot it tells me that "mounting none on /dev failed No such device" and when I shut down I get these messages.I see this was asked before and that it isn't a big issue, but I'd still like to solve it. The problem is that I'm pretty new to Ubuntu and Linux in general I don't know how to follow the very general instructions given in that thread.
View 2 Replies
View Related
Jul 13, 2010
I have Ubuntu 10.04 installed and although I had some problems initially, everything works fine now. I'm just bragging about that. I do have some strange "issues" with my boot. I know that Ubuntu is supposed to boot with only plymouth visible, but before I see plymouth I have a fairly long period of time when I see nothing but a console cursor (a.k.a. caret) blinking. I'm no expert in reading bootchart charts, so I'm attaching it for some feedback. I have no idea how and what to optimize.
My boot is ~40 secs as noted on the bootchart, but it would be nice to cut some fat if possible. Also, my StartUp-Manager is displaying some veeery long boot options. It doesn't look nice. I guess he's reading /boot/grub/grub.cfg but I don't think I'm supposed to see all that. my boot and shutdown screens are very low res and very ugly, often flickering on updates. I have 10.04 setup at work as a web test platform on a very old/crappy PC (Intel GFX) and bootsplash looks much nicer than on my home laptop.
View 5 Replies
View Related
Jul 15, 2010
For some time now - every time I reboot my computer the swap drive is not mounting. I have to manually mount (Swapon) it via GParted. Using the sudo mount -a does not seem to have an effect.can Anyone tell me what is going onhere is my fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]...
View 4 Replies
View Related
