OpenSUSE Install :: Want To Boot Windows7 - Ubuntu - Possible To Run All 3 OS In My Computer
Mar 23, 2010
In my computer I already installed Windows7 and Ubuntu.
when I start my computer then my computer want which OS I want to start with.
Now I'm want to install opensuse in my computer. But I want to know is it possible to run all 3 OS in my computer and when I start my computer it will ask that which OS now want to boot
1) Windows7
2) Opensuse
3) Ubuntu
I will enter my choice and If I enter choice 2 then I will work on "Opensuse" if I enter choice 3 then I will work on "Ubuntu" if I enter choice 1 then I will work on "Windows7"
View 9 Replies
ADVERTISEMENT
Dec 31, 2009
I have a laptop that has multiple partitions and was running Windows 7. I installed Fedora in a area of free space in the extended area, thus in a logical partition. Fedora is now running on the laptop. But, at boot time, there is NO BOOT MANAGER. The laptop just boots straight away to Fedora.
I know this has probably been covered, but is there an "official" procedure or document available to us newbies that I can use to recover my system such that it boots all of my installed bootable partitions (including Windows7)?
View 2 Replies
View Related
Nov 6, 2010
i have installed opensuse 11.3 but i have installed it 2 times . now i can't get in windows 7. can i uninstall opensuse to get other opensuse and windows? and how i can uninstall if i need?
View 9 Replies
View Related
Aug 5, 2010
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies
View Related
Apr 23, 2010
Recently I tried to install openSUSE 11.2 on my HP Pavilion dv6-2125tx notebook PC which comes preloaded with Windows7. I used a DVD to install the openSUSE. Before installation, I created partitions on my hard drive for root, /home and swap by shrinking the C volume. This is the only way to create partitions on my laptop. I used NTFS filesystem during format of these partitions. During installation, the first error message that appeared was YaST error saying that it could not format the partitions though it was allowing me to set mount points and filesystems for the partitions I had created. The next problem was swap. I was not able to see the mount point and F (for format) for the swap partition. However when I continued by ignoring the warning for swap there was a partition for swap and it was the same partition I wanted to have for swap. So, I clicked the Install button. The next problem was grub error 17: cannot mount the partition. And then when I continued ignoring this too, the computer did not get any of the OSes saying that BOOTMGR (BOOT MANAGER) is missing. I had no options left but to recover it using recovery disks of my laptop.I searched a bit on the internet and found that grub error 17 happens if the corresponding partition exists but the filesystem is not recognized by the GRUB.
I concluded that it was happening bacause YaST was unable to format any of partitions with the filesystem selected. So in my next attempt, I formatted the partitions in FAT32 filesystem in Windows which I think GRUB can recognize. I did that because even if YAST would be unable to format the partition the filesystem could be recognized by GRUB.And I think that happened but I got a new error this time.The grub error 22.Now I don't know what to do. One thing that I am expecting is that my hard drive cannot be partitioned in the correct way for linux. I can only shrink the volume and create logical partitions only from one dynamic partition c. And that may be the reason YaST could not format the partitions in the correct filesystem and inturn the grub error is happening.
View 9 Replies
View Related
Jul 29, 2011
I just installed it. On the dual boot screen my windows7 partitions show up but nowhere on openSUSEI haven't checked if my windows7 partition boots though,
View 7 Replies
View Related
Sep 6, 2010
After installing win7 I've lost the grub menu. I tried live cd and reset it. Bu I couldn' t. When I write find /boot/grub/menu. it's write (hd0,1). how can I reset the grub menu?
View 1 Replies
View Related
Jan 25, 2010
Well, in first place let me tell you that my HDD boot sector or i dont know what is damaged, so to boot i made a boot usb with the grubdos utility, so anytime i want to boot in win7 i have to plug my usb and select win7 from it.Today i finished downloading the opensuse iso, then i mounted the image with poweriso and initialized the install, and it asked me to restart my computer, after that when i boot from my usb pendrive it goes directly to the opensuse install, but it just showme the blackscreen and nothing happens.
View 8 Replies
View Related
Jan 31, 2011
I've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies
View Related
Mar 19, 2011
i installed kde to my usb drive but i think the grub also went to it because im running windows 7 and now kde but would like to know how to uninstall it if i ever have to. and also i cannot boot my computer unless that specific usb is connected
View 6 Replies
View Related
Jun 7, 2011
after i have installed suse 11.4 on my acer m1300 my computer (desktop) won't auto boot. if i boot it manually my computer freezes. only if i boot it in revovery mode it continues with automatic confiration and it installs suse. but even than it won't reboot and i have to shutdown the hard way. when i restart the computer freezes and won't open opensuse.
View 9 Replies
View Related
Aug 11, 2010
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
View 9 Replies
View Related
Jun 22, 2011
I built this computer with a Gigabyte motherboard, i3 processor, 8Gb ram, 64Gb SSD, and 1.5Tb HDD. Loaded Windows 7 to the SSD... repartitioned the drives and loaded Ubuntu 11.04.The start menu comes up to select Windows 7 or Ubuntu... when I select Ubuntu I get a screen which reads:Windows failed to start. A recent hardware or software change might be the cause. To Fix the problem:1. Insert your windows installation disc and restart your computer.2. Choose your language settings, and the click "Next"3. Click "Repair your computer."if you do not have this disc, contact your sys admin or manufacturer for assistance. File: ubuntuwinbootwubildr.mbrStatus: 0xc0000098Info: The selected entry could not be loaded because the application is missing or corrupt.
This screen continues to come up. I tried to load Ubuntu with Wubi but it would not install... I have now installed it from a DVD but the load screen keeps putting me back to the screen above. I can't load from the Windows CD it won't recognize it even if I change the bios setting.Windows 7 seems to be running fine... and Ubuntu seems to have loaded fine... so how can I get my Windows boot screen to go and load Ubuntu as my OS?
View 9 Replies
View Related
Jan 2, 2011
I have been running dual boot Windows XP and Slackware for years but I recently changed things up a bit a "broke" something.
Windows XP is on it's own 250GB HDD. I installed Windows 7 on a seperate 74GB HDD but it appears that it installed the bootloader over top of the Windows XP bootloader on the 250GB HDD. Both OS's booted fine and that point. Then I partitioned the 250GB HDD into 150GB and 100GB leaving me 100GB to install Ubuntu. I told Ubuntu to stick it's bootloader on the 250GB HDD thinking everything would work like magic although there appears to have been a little bit too much magic. Normally Slackware will allow you to manually edit your Lilo config file during installation and add all your OS's but this didn't happen with the Ubuntu install.
After the install there were 5 options in the bootloader menu (at this point I am not even sure what bootloader it was using). Ubuntu, Ubuntu ("safe mode?"), memtest, more memtest, and Windows 7 (bootloader? it wasn't just called windows 7 but something like Windows 7 bootloader, I have only booted once and I am writing this from Ubuntu right now). I tried selecting Windows 7 at that point hoping that it would bring me to the Windows bootloader which would allow me to select from Windows 7 and Windows XP but the screen just went blank for a second or two and then sent me back to the same screen I was just at.
So a quick Google of Ubuntu bootloader led me to believe I was using Grub and I needed to look for the /boot/grub/menu.lst file and edit that but the file wasn't there. Then I tried running grub but I was informed it wasn't even installed. I thought maybe I would have better luck with Lilo but that wasn't installed either. So I installed Lilo and ran liloconfig but I was told that fstab gave a UUID that led Lilo to belive I wasn't using an ordinary block device and I should go fix that and come back afterwards. In fact the only thing in fstab was the ext4 partition with Ubuntu and the swap partition even though I have 4 sata drives installed with 6 separate partitions.
At this point I am pretty lost. Most of my Linux work is done in Parallels now on a Macbook so I haven't had to mess with the bootloader in years and when I did it was all on Slackware which to me is set up quite a bit differently than Ubuntu. I would be pretty sick if I screwed up and took out 3 OS's with it.
How Grub will handle booting both Windows OS's when Windows appears to be doing it with one bootloader.
View 5 Replies
View Related
Nov 10, 2010
I installed ubuntu on my dual boot system which had XP and Windows 7 installed, and after installing ubuntu I was able to boot windows 7 and ubuntu, but unable to boot XP it says some dll file is missing, now I think if try to repair xp with installation disk it might ruin my ubuntu.
View 1 Replies
View Related
Apr 12, 2011
Finally made the switch over to ubuntu, but I needed to keep my windows7 for several reasons. Let just start by saying I have two hard drives, a 200gig(which holds my windows7 partition) and a 500gig(has a 100gig partition which has ubuntu on it). After finally getting 10.04 to install on the 100gig partition and everything running right, I tried to load up windows7 and got an error.
Something along to lines of "the partition does not exist". I believe I messed up on the last step on the install, as I might of just been careless. I remember reading somewhere that if using multiple hard drives grub may get messed up in one way or another. IS there a way to fix this and make grub realize that window7 is on another partition, or am I out of luck?edit: Id like to add that grub is recognizing windows7, it just will not load off the other partition(I think)
View 4 Replies
View Related
May 14, 2011
I have done some commands in ubuntu 11.04 and got problems, thinking of reinstall it. (laptop acer 5738zg)
Previously when i have dual booted win7 and ubuntu10 and linux mint i always get "grub rescue" when i try reinstall my linux partition, and it ends with i have to do clean reinstall of both windows and linux, which is a major pain in the rectum area
Is there a way to make my linux go back to original state without reinstall, and if i reinstall, how can I do this without loosing win7 partition and get this awful grub rescue message.
View 1 Replies
View Related
Jun 11, 2011
I have a laptop that has a dual boot of Windows7/Ubuntu10.04. Ubuntu loads fine, but Windows 7 does not. It shows up in the Grub, but it will not load. I assume that the boot loader was messed up somehow, but I am not experienced at deciphering the boot info file. I was hoping someone might be able to take a look at the file and tell me what the issue might be, and also which part of the text indicates the problemBoot File:
Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
[code]...
View 3 Replies
View Related
Jan 6, 2011
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
View 9 Replies
View Related
Apr 13, 2010
I need to know whether Ubuntu can be hacked when it is installed as a dual boot with W7 by hacking windows and getting access to the Ubuntu partition?
What I would also like to know if this way can be used to put a key logger or screen capture in Ubuntu which installs next time Ubuntu is started?
View 9 Replies
View Related
Jan 25, 2011
I pretty much know nothing at all about partitioning hard-drives and unspeakably less about linux as a whole. but i really want to get into it. (The HP Mini 311 is what i am using)
Okay so a couple of days ago (before i had ever heard of Ubuntu, or even thought i could ever use Linux based software). I had been Dual-Booting OSX Snow Leopard and Windows 7, while using Chameleon boot-loader, on my HP Mini 311. Even though my sound-card and network adapter do not work while running Snow Leopard.
I followed this guide for dualboot: [url]
So i heard about the new Linux Os Ubuntu, and after trying it for about 3min on a USB i was sold. So i began to make my HP a triple-boot now with OSX Snow Leo, Windows 7, and Ubuntu.
I did this by recreating the same dual-boot system as before, but this time saving room for Ubuntu to be installed to my hard drive, after SnowLeo and Win7.
I got this to work perfectly by creating a 4th partition for Ubuntu and a 5th for swap area.
Here is where my problem lies... I saw this tutorial for dual-booting Win7 and Ubuntu, while making another partition so that windows and ubuntu can share the same files.
Here:[url]
Once i tried doing this on my triple-boot(adding ubuntu partition, swap partition, and a "storage" partition, on top of the 3 partitions i created during dual-boot setup) My Windows 7 stopped booting. I read somewhere that hdds can only have like 3 primary partitions, which is the only kind of partition i know how to use. so i was thinking maybe i could put this storage partition in another mount location, such as /home or /usr, because i think the added partitions is what messed up my Windows 7 boot. My only problem is i have no idea what different mount positions are used for, nor how to use them properly.
View 7 Replies
View Related
Jan 16, 2011
I am new to installing Ubuntu and cannot get it to install on my desktop windows7 and can't see any obvious reasons why it won't work.
The Ubuntu home page led me to believe that the wubu download would be the easiest way to download and install ubuntu side-by-side with my windows7, but I'm not finding that to be true. Know I have now tried to download that windows ubuntu installer 3 times now and it fails every time.
I have complete admin rights to my desktop. After over an hour of dowloading I keep getting message "Permission denied" and it refers me to the log file.
The last few lines of the log files states:
View 2 Replies
View Related
Dec 6, 2010
Windows 7 is first boot disk. Installed Fedora 13 on second disk from DVD. During installation it did not ask if I wanted dual boot. Fedora installed fine on second disk. Rebooted and only Windows will lood. How to setup to dual boot? Can I modify Windows Boot file? or do I have to install Grub on to sda. How do I do that?
View 2 Replies
View Related
Jul 28, 2011
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies
View Related
Mar 12, 2011
I have a desire to boot Tripel windows7 arch and Slackware but unsure how to partison my hard drive??
View 5 Replies
View Related
Jun 9, 2010
Is it possible to install ubuntu 10.04 on a second partition without overwriting the windows7 bootloader and boot it using grub on a usb stick?
I would be happy with just the second option as I could fix mbr if I have to, I just don't want it to easily visible that linux is installed as well as windows.
View 4 Replies
View Related
Jul 6, 2011
my NIC drives me crazy and I need some help to gather all relevant informations to file a decent bug report. Maybe someone could guide me through this process.My mainboard is an AsRock Z68 Pro3
[URL]
I use a dual-boot setup with Windows7 installed in parallel to Fedora 15-x64. Whenever I had Windows in use and jjust reboot the system into Fedora, the NIC does not work as expected. Instead it goes in an endless "em1: link up" loop which results in very low bandwith or even complete network timeouts. This happens in Firefox as well as with yum or ping.
Quote:
Originally Posted by dmesg
[ 58.763294] r8169 0000:05:00.0: em1: link up
[ 59.686773] r8169 0000:05:00.0: em1: link up
[ 61.936454] r8169 0000:05:00.0: em1: link up
[code]....
If I directly cold boot into Fedora (after the power cord has been removed and the system got completely re-initialized) there are no problems at alll and I get a fast and stable network conection. This also happens with other linux distributions, for example SysRescCD.
View 1 Replies
View Related
Apr 30, 2010
my laptop windows 7 64-bit intel core i5,4GB ddr3 RAM 500GB HDD. hard Drive partion -- c-drive:150GB D-Drive:150 GB remaing 160 GB not allocated but when i install fedora 12 . it says create boot/efi partion, root partion i dont get it
View 7 Replies
View Related
Oct 30, 2010
I have and acer aspire 5251-1805 and I have a problem to install ubuntu. When I look at the Bios info there are 6 boot options including booting from CD. But then when I start the computer and press f12 there are only 3 options listed and there is no option to boot from the cd. What should I do?
View 5 Replies
View Related
Aug 2, 2011
Hi,I had a Windows 7 installation and I decided to install ubuntu 11.04 I tried several times but every time soon or later something with grub goes wrong.Most times I get the error "no such partition",once it just halted after "verifying DMI ... " .I fixed windows mbr with "bootsect /nt60 C:" and then tried to reinstall grub with boot-repair .It showed no errors but after reboot I get "no such partition" again.
My scheme is something like :
/dev/sda1 -> the windows 7 system partition NTFS
/dev/sda2 -> partition for windows programs etc NTFS
/dev/sda3 -> partition for files(images/music/videos) NTFS
/dev/sda4 -> extended partition
[Code]...
View 3 Replies
View Related
